• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.4B no.2
• /
• pp.47-53
• /
• 2004

The salient pole rotor type single phase SRM (switched reluctance motor) uses radial and axial direction magnetic flux simultaneously. Therefore, the output power per unit volume is very high and the shaft length is shorter than other types of SRMs with the same output. Furthermore, it can be manufactured with low cost owing to its simple structure and driving circuit. The prototype was designed using the theory of the traditional rotating machine and 3D FEM analysis. On this paper, the experiment apparatus, which includes the fabricated prototype in previous researches, was fabricated to measure the current and voltage of the prototype. Then the flux linkage, inductance and magnetic co-energy were calculated using the experimental results. Finally, the measured magnetic co-energy was compared with the simulated magnetic co-energy.

• Journal of the Economic Geographical Society of Korea
• /
• v.16 no.3
• /
• pp.344-358
• /
• 2013

Vietnam's growth as the second largest coffee producer in the world has been fueled by domestic migration into central highlands. However, the detail migration processes have not been explicitly discussed. In particular, the existing literatures tend to describe the migration flow in a framework of planned migration versus spontaneous migration, paying less attention to the linkage between them. With a case study of Dak Lak province which is the leading robusta producer in Vietnam, this research investigates the linkage between planned and spontaneous migration in a multiscalar approach. The statistic data allow the researcher to know temporal association between the two type of migration in a provine scale. The survey and interview about two coffee-producing communes - Ea H'Ding in Cu M'gar district and Doan Ket in Krung Buk district - inform us that the linkage between planned and spontaneous migration is contingent to the local contexts including ethnic composition, timing of settlements, governement's development program, and timing of a large flow of in-migration.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.1
• /
• pp.58-63
• /
• 2010

A new contact force estimation technique is proposed. Keeping the contact force at a certain level between finishing tool and the object is essential since the quality of the finished surface is very sensitive to the contact force during the finishing process. However, the contact force measurement cannot be obtained by simply installing load cells under machine table or in the middle of tool linkage. The reason is that the weight of the machine table and the tool linkage are much heavier than the force to be measured. To that end, a method for estimating disturbance is proposed for a system that is similar to the mechanism of the finishing machine, and the same method is applied to estimate the contact force of the brush-type finishing machine. To verify the effectiveness of the proposed method, a small scale test set-up has been built and the method has been tested.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.7
• /
• pp.1296-1301
• /
• 2002

In recent years, the pathology in the colon grows up annually since people of all ages prefer to have less fiber and more fat food. Therefore, the colonoscopy is generalized in developed countries. But it requires much time to acquire a dexterous skill to perform an operation and the procedure is painful to the patient. Therefore, some studies on the development of autonomous colonoscope are carried out. In this paper, we propose a new and simple locomotive mechanism that can be propelled by elliptic motion of a leg. It has several legs that have constant phase difference each other and those legs are disposed along the upper and lower of the body. In order to evaluate the performance of locomotive mechanism, we carried out the simulations of moving characteristics and the experiments in the colon of a dead pig.

• International Journal of Precision Engineering and Manufacturing
• /
• v.5 no.4
• /
• pp.43-49
• /
• 2004

A spring-actuated linkage system is used to satisfy the desired opening and closing characteristics of the electric contacts of a vacuum circuit breaker. If the type of a circuit breaker and the structure of the linkage system are predetermined, then design parameters such as stiffness, free length and attachment points of the spring become the important issues. In this paper, based on the energy conservation, the total system energy is constant throughout the operating range of the mechanism; a systematic procedure to optimize the spring design parameters is developed and applied to a simplified mechanism of a circuit breaker. The developed procedure is converted to the environment of the multi-body dynamics program, ADAMS for an in-depth consideration of the complex dynamics of a circuit breaker mechanism.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1174-1176
• /
• 2005

The permanent magnet(PM) overhang effect has been generally used to enhance the linkage flux in the motor. In this paper, we quantitatively investigate the PM overhang effect in the new type axial flux permanent magnet(AFPM) motor with a double-sided airgap. The motor performances such as linkage flux, back electromotive force(EMF), magnetic force, etc. were analyzed according to the variation of the overhang angle. From the results, we can select the proper overhang angle of PM which improves the performance of the AFPM motor.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.3
• /
• pp.132-138
• /
• 2004

In a vacuum circuit breaker mechanism, a spring-actuated linkage system is used to satisfy the desired opening and closing characteristics of electric contacts. If the type and structure of the linkage system required to the circuit breaker is predetermined, the stiffness, free length and attachment points of a spring become the important design parameters. In this paper, based on the energy conservation that the total system energy is constant throughout the operating range of the mechanism, a systematic procedure for optimizing the spring design parameters is developed and applied to the simplified mechanism of a circuit breaker. Then, in order to consider the complex dynamics of the circuit breaker mechanism rather well, the developed procedure is converted to the environment of a multi-body dynamics program ADAMS.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.2
• /
• pp.169-172
• /
• 2006

Leaflet number of soybean controlled by Lf2 locus is the important trait in photosynthesis and plant type. The objective of this research was to identity molecular markers linked to the lf2 locus. A total of $115F_2$ plants were derived from a cross between normal three-leaflet type Sinpaldalkong (Lf2Lf2) and seven-leaflet mutant type T255 (lf2lf2). All leaflet counts of parents and $F_2$ individual plants were made in the field on fully expanded leaves on the main stem when terminal growth of the main stem had ceased. One-thousand 10-mer oligonucleotide RAPD primers and 664 SSR primers were used. The segregation ratios of 3 : 1 were observed in the $F_2$ population and the Chi-square values strongly suggested that the seven-leaflet was controlled by a single recessive gene. A genetic map was constructed from the 15 segregating markers (9 RAPDs, 5 SSRs, 1 lf2 locus). OPAD03 and OPAI13 RAPD markers were linked to the lf2 locus that controlled seven-leaflet type at a distance of 20.5 and 23.5 cM, respectively. Molecular markers identified in this study linked with lf2 locus will be helpful to locate lf2 locus on the public soybean molecular linkage map and would be useful for tagging the lf2 locus that controls seven-leaflet trait.

• Journal of Fashion Business
• /
• v.24 no.4
• /
• pp.130-143
• /
• 2020

The development of three-dimensional (3D) printing technology is bringing new innovations to various fields such as health care, architecture, and fashion. 3D printing can be manufactured to suit the size of the consumer's body, modify the design to meet their tastes, and produce small quantities of various products. Therefore, 3D printing in the field of fashion has great potential. The purpose of this study was to investigate various application models of 3D printing for fashion design and analyze their characteristics after developing the fashion garment samples. First, the background of 3D printing was reviewed then, fashion designed by a 3D printing application was analyzed. As a result, four types of 3D printing applications were developed: object-attached, linkage, kinematics, and assembly. The object-attached type was the method of printing 3D material as an object in the intended shape and form and was attached to the garment by sewing. The linkage type referred to printing 3D material in small pieces of certain shapes that could be linked. The kinematics type was structures with hinges that could flex to fit the human body. The assembly type referred to developing 3D materials in female and male pieces such as nuts and bolts. By providing the advantages, disadvantages, trial-and-errors, and challenges of the 3D printing fashion design process, this study contributes to the effective applications and possibilities of future design.

• Journal of Environmental Science International
• /
• v.12 no.12
• /
• pp.1215-1225
• /
• 2003

The purpose of this research was to investigate the characteristics of urban ecotopes and to classify ecotopes systematically from them. Total of 15 characteristics for classification of ecotopes were selected, and there were categorized 3 factors, that is abiotic, biotic and anthropological factors. The ecotope types in the study area were classified into 67. The classification of ecotope was made with SPSS for Windows Version 10.0 on the basis of the 15 characteristics. As the results of cluster analysis using the average linkage method between groups, groups of ecotope type were divided into 15 clusters. It was known that there was not a great difference in an affinity as the result of overlapping the maps of ecotope type and land use type. This research suggested characteristics for classification of ecotopes, but there was a limit to Set the objective method for grade classification because of lacking in the basic data, the research of characteristics will be accomplished continuously.