• Elastomers and Composites
• /
• 제26권2호
• /
• pp.115-122
• /
• 1991

Polychloroprene rubber was moisture-cured after treating them with silane coupling agents such as 3-mercaptopropyltrimethoxysilane(MPS), 3-methacryloxypropyltrimethoxysilane(MAS) and vinyltriethoxysilane(VES), especially MPS. The cure reaction is composed of two steps. The first is the reaction between chlorine atoms of CR and silane coupling agents. The second is the formation of cross-links which are siloxane linkage. The linkage is formed by the condensation of silanol groups which are produced by the hydrolysis of alkoxysilyl groups. The first reaction was kinetically studied and the reactivity of CR to silane coupling agents was determined in previous literature. Crosslinking density and mechanical properties of the moisture-cured elastomer filled with silica or non-filled were studied and the feasibility of this cure system was discussed.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.251-252
• /
• 2021

With the recent emergence of the 4th Industrial Revolution, the government is promoting the development of smart construction technology and institutional improvement through various policies to induce cutting-edge and technological innovation in the construction industry. As part of such smart construction technology, the application of BIM is being activated, and related regulations and guidelines are constantly being supplemented. In relation to BIM, there are many studies on the fields of library, design standards etc., but research on specific unit price utilization and unit price DB construction for calculating construction cost is insufficient. Therefore, in this study, a basic study was conducted on the linkage of the construction standard market unit price and the BIM library. Based on the basic research conducted in the future, we intend to establish specific standards for calculating BIM-based construction costs.

• 한국생산제조학회지
• /
• 제22권3_1spc호
• /
• pp.587-592
• /
• 2013

Until recently, the primary users of wheelchairs were people with lower body disabilities. However, the number of patients recovering from accidents or surgery, as well as the number of elderly people using wheelchairs, is constantly increasing. This study examined the design and manufacture of standing and gait assist wheelchairs that assist temporary gait disturbed patients to take rehabilitation training and elderly people to engage in walking exercise. A kinematic analysis was used to select a drive motor and design a four-bar linkage mechanism for lifting the backrest vertically. Using a multibody dynamic simulation, detailed design was performed taking into consideration the spatial motion and partial interference, and the necessary push force and stroke of the linear actuator were also calculated. To ensure structural safety, the von-Mises equivalent stresses of the upper and lower brackets of the linear actuator were verified through a finite element analysis. The manufactured wheelchair was shown to operate successfully as intended, using the developed controller for the drive motors and linear actuator.

• Spatial Information Research
• /
• 제21권5호
• /
• pp.73-82
• /
• 2013

최근 국내외적으로 실내공간에 대한 관심이 높아지면서, 실내공간정보 구축 및 서비스에 관한 다양한 연구가 이루어지고 있다. 실내공간 정보를 구축함에 있어서 BIM(Building Information Modeling) 자료는 매우 유용하다. 이에, BIM 자료를 GIS에서 활용하기 위한 다양한 연구가 진행되고 있다. BIM 자료를 GIS에서 활용하기 위해서는 실내공간정보 구축을 위한 변환기술과 자료 가시화 기술이 반드시 필요하다. 기존 연구들이 대부분 실내공간 정보 구축을 위한 변환에 집중되어 있으며, BIM을 기반으로 구축된 공간정보들의 가시화에 관한 연구는 거의 이루어지지 않았다. 이에 본 연구에서는 BIM과 GIS 연계를 위하여 BIM 자료기반으로 실내 공간 자료를 구축했을 때, 실내 시설물 관리 시스템에 적용할 수 있는 실내공간 세밀도(LOD:Level of Detail) 모델을 제시하였다.

• 농촌지도와개발
• /
• 제9권2호
• /
• pp.199-213
• /
• 2002

The purpose of this study uses agricultural knowledge system theory to explore how the extension system in South Korea was developed and have worked well. By agricultural knowledge system we emphasized the dynamic networks of actors, processes of negotiation, and the diverse ways in which knowledge is constructed and performed. It was possible that individuals may participate in and utilize multiple knowledge systems. The knowledge systems reflected the idea that the boundaries between knowledge groups were not closed and that there could be considerable overlap between knowledge systems. The constructions of agricultural knowledge systems thus included social interactions, communication, and the diverse processes individuals employ to create, use, and evaluate multiple types and sources of information. As such, there were six priorities to development agricultural extension system; the linkage between agricultural colleges, Rural Development Administration(RDA), branch of RDA, establishing the research institution of research and extension linkage. exchange research agent with extension agent, developing information technology system, bottom-up approach, the linkage between national project and regional within extension projects, enforcement of informal learning.

• The Plant Pathology Journal
• /
• 제18권5호
• /
• pp.266-270
• /
• 2002

Inbred lines of Chinese cabbage KU-101 (resistant line against Plasmodiophora brassicae race race 6) and CS-113 (susceptible line) were crossed and their progeny lines F$_1$, BC$_1$F$_1$, F$_2$, and F$_3$ were produced for the construction of the genetic linkage map of R brassicae race 6-resistant Brassica campestris ssp. pekinensis genome. Restriction fragment length polymorphism (RFLP) was applied to compare between parents and their f$_2$ progenies with a total of 192 probes and 5 restriction enzymes. The constructed RFLP map covered 1,104 cM with a mean distance between genetic marker of 8.0 cM, and produced 10 linkage groups having 121 genetic loci. The loci of P. brassicae race 6 (CR6)-resistant Brassica genome were determined by interval mapping of quan-titative trait loci (QTL), which resulted from bioassay using the same race of the fungi in P3 population. Resistant loci were estimated in numbers 1 (Gl) and 3 (G3) linkage groups. In the regression test, Gl had a value of4.8 logarithm of odd (LOD) score, while C3 had values of 4.2-7.2. Given these results, the location of the CR6-resistant loci within the Brassica genome map can now be addressed.

• EDISON SW 활용 경진대회 논문집
• /
• 제5회(2016년)
• /
• pp.434-442
• /
• 2016

Jansen mechanism is composed of mechanical walking linkages that are designed and optimized by Theo Jansen in 1990. Although he has made optimum values for linkage dimensions for Jansen Mechanism, there are still various applications for this mechanism and also various optimum values for each application. In this paper, Jansen Mechanism optimization has been processed for the Science Box. The Science Box has its own linkage dimensions and related components and makes space for optimization process. For the optimization 3 to 4 linkage were selected which had no similar ratios of linkages between other applied Jansen mechanisms and to reduce experiment numbers. Response Surface Method was used with Minitab 17 for optimization and m.sketch was used for experimentation. Intuitive method had to be used to find optimum values as with RSM optimum value could not be found. EDISON Designer was used to make final CAD model with optimum values and laser cutter was used to get appropriate acryl panels for legs.

• Asian-Australasian Journal of Animal Sciences
• /
• 제32권1호
• /
• pp.58-62
• /
• 2019

Objective: The oxidized low density lipoprotein receptor 1 (OLR1) gene plays an important role in the degradation of oxidized low-density lipoprotein and adipocyte proliferation in mammals. For this reason, we aimed at investigating the association of OLR1 gene polymorphisms with carcass quality traits in Chinese Qinchuan cattle. Methods: The single nucleotide polymorphism (SNP) was identified in the 3' untranslated region of bovine OLR1 gene by DNA sequencing. In addition, the haplotype frequency and linkage disequilibrium estimates of three SNPs were evaluated in 520 individuals. Results: Results indicated that the studied three SNPs were within the range of moderate genetic diversity (0.25< polymorphism information content<0.5). Haplotype analysis of three SNPs showed that ten different haplotypes were identified, but only five haplotypes were listed as those with a frequency of <0.05 were excluded. The Hap3 ($-G_1T_2C_3-$) had the highest haplotype frequency (42.10%). Linkage disequilibrium analysis showed that the three SNPs had a low linkage ($r^2<0.001$). The T10588C and C10647T were significantly associated with backfat thickness and intramuscular fat content in Qinchuan cattle. Conclusion: Based on our results, we believe that the OLR1 gene could be a strong candidate gene for influencing carcass quality traits in Qinchuan cattle.

• 기술혁신연구
• /
• 제28권4호
• /
• pp.97-126
• /
• 2020

본 연구는 4차 산업혁명의 핵심 산업으로 주목받고 있는 스마트홈 관련 산업의 국민경제적 파급효과를 정량적으로 분석하여 그 잠재성을 평가하였다. 이를 위해 선행연구들에 대한 문헌검토(literature review)를 통해 스마트홈 관련 산업을 제조업과 서비스업으로 분류하고 외생화하였다. 그리고 2018년 산업연관표를 이용하여 이들 산업이 유발하는 생산, 부가가치, 고용 및 취업효과와 산업간 연쇄효과를 분석하였다. 분석결과 스마트홈 제조업과 서비스업은 각 산업 영역에서 타 산업에 비해 높은 수준의 부가가치유발효과를 보였으며 스마트홈 산업 내부적으로는 제조업의 서비스업 생산 견인 기능이 상대적으로 더 크게 나타났다. 또한 4차 산업혁명기술을 활용하는 산업답게 기술집약적인 산업과의 연관성이 높을 뿐만 아니라 스마트시티, 스마트카, 핀테크 등을 구현하기 위한 서비스 부문과도 깊이 연관되어 있음을 확인하였다. 한편 스마트홈 제조업은 후방파급효과가 전방파급효과에 비해 상대적으로 높은 최종 수요적 산업인 반면 스마트홈 서비스업은 전방파급효과가 후방파급효과에 비해 상대적으로 높게 나타나 중간재 산업으로서 타 산업으로의 공급 기능이 높은 산업임을 알 수 있었다.

• 기술혁신연구
• /
• 제12권3호
• /
• pp.259-276
• /
• 2004

This paper identifies success factors influencing technology commercialization, develops a framework for technology commercialization model among factors, commercialization, empirically investigates the framework, and suggests policy alternatives for more effective technology commercialization in the areas of information and communication technology industries in Korea. To facilitate commercialization of government-sponsored R&D projects, the following policy implications are suggested; manager's willingness and support on commercialization, and more abundant commercialization fund, former experience on commercialization, strong linkage with present business and technology, more information about government commercialization programs and technologies, and improved environment of commercialization including market protection and penetration support.