• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.343-345
• /
• 1998

By computer simulation, the pattern of magnetic field distribution on the Nb-foil of a rotating flux type superconducting power supply has been calculated. Using the results, the current pumping rate has been calculated and compared with the results obtained by the experiment. The experiment has been executed with small-size flux-rump in the environment of LN2 and LHe in order to compare the pattern of magnetic filed in the superconducting state and in the normal state. Five hall-sensor was located on the center, right side, left-side, upper side, lower side of the Nb-foil in order to obtain more accurate pattern of the magnetic field generated by rotating pole. In the simulation, the effects of the excitation-magnet and the iron core located at the inner-side and circumference of the magnet have been considered. By comparing the data from the experiment and the results from the simulation, the size of normal spot estimated. At the same time, by calculating the linkage flux, the current-pumping-rate has been obtained. Consequently, the results obtained from experiment and simulation coincided as expected.

• Journal of Convergence for Information Technology
• /
• v.8 no.2
• /
• pp.233-238
• /
• 2018

SMEs and small enterprises are making various attempts to manage SMEs in terms of equipment, safety and energy management as well as production management. However, SMEs do not have the investment capacity and it is not easy to build a smart factory to improve management and productivity of SMEs. In this paper, we propose a smart factory construction algorithm that partially integrates the factory equipment currently operated by SMEs. The proposed algorithm supports collection, storage, management and processing of product information and release information through IoT device during the whole manufacturing process so that SMEs' smart factory environment can be constructed and operated in stages. In addition, the proposed algorithm is characterized in that central server manages authentication information between devices to automate the linkage between IoT devices regardless of the number of IoT devices. As a result of the performance evaluation, the proposed algorithm obtained 13.7% improvement in the factory process and efficiency before building the Smart Factory environment, and 19.8% improvement in the processing time in the factory. Also, the cost of input of manpower into process process was reduced by 37.1%.

• Journal of Convergence for Information Technology
• /
• v.7 no.4
• /
• pp.27-38
• /
• 2017

The purpose of this study was to ascertain new policies fo the development of the Korean Hospital Accreditation Program (HAP) by comparing and reviewing the domestic HAP of Korea, the U. S. and Australia as well as the International Accreditation Program of the International Society for Health Care Quality. The results of this study are as follows. First, it is necessary to improve the standards of the HAP such as 'patient and community centered standards' and 'staffing related standards'. Second, it is necessary to strengthen patient safety through the HAP. Third, the linkage among the HAP, clinical indicators and patient experience evaluation should be strengthened. Fourth, the competencies of surveyors should be improved. Fifth, the HAP of small and medium hospitals also needs to be vitalized. Sixth, it is necessary to improve the disclosure of the healthcare quality evaluation results. The findings of this study can be used as a basis to improve the Korean HAP.

• The KIPS Transactions:PartB
• /
• v.12B no.2 s.98
• /
• pp.137-142
• /
• 2005

Since wireless communication cost is relatively expensive, the mobile games using cellular phones or PDAs are mostly played after being downloaded unlike more updated types of phone-to-phone or online games. In particular, the upbringing games, in which garners foster virtual companion animals or vegetables as their avata, have been spotlighted. It is essential to supply variety of items for upbringing avatas. However, due to diverse tastes for avatas and limited storage of mobile terminals, game manias must download their desired items from homepages. In addition, game developers must inform users through SMS messages whenever a new item is created. To do so, they must link WEB server and WAP server to Call Back URL or ARS. This paper proposed a linkage method suitable for JAVA-based mobile phone operating system. The proposed method will consequently increase life cycle of a game and reinforce profitability.

• Korean Journal of Medicinal Crop Science
• /
• v.25 no.6
• /
• pp.381-388
• /
• 2017

Background: This study was conducted to acquire basic information on the phenotypic and genotypic characteristics of the germplasm of Panax ginseng C. A. Meyer collected from China and Korea, and identify the variations that can be utilized in ginseng breeding programs. Methods and Results: Quantitative parameters were evaluated, and used to compare and analyze on genetic polymorphisms in the germplasm. The genetic characteristics and classifications were compared and analyzed for each character. Stem length followed a normal frequency distribution ranging from 15.5 cm to 40.5 cm, with showing approximately 40% having a stem length of 20 - 30 mm. Stem diameters ranged from 2.7 mm to 11.3 mm. Stem number per plant ranged from 1 to 3; approximately 50% had a single stem, and 45% had two stems. A non-normal frequency distribution was observed for petiole number, with approximately 60% of the germplasm having 3 - 5 petioles. Petiole length exhibited a normal frequency distribution, raging from 4.5 to 10.6. Petiole angle in the germplasm ranged from $28^{\circ}$ to $89^{\circ}$ and seedstalk length ranged from 5.6 cm to 27.3 cm. Conclusions: The genetic polymorphisms identified by complete linkage clustering based on the quantitative characteristics of Panax ginseng C. A. Meyer collected from Korea and China were classified to 6 groups, namely I, II, III, IV, V, and VI with frequencies of 6.7%, 20.0%, 31.7%, 8.3%, 6.7%, and 26.7%, respectively.

• Journal of Preventive Medicine and Public Health
• /
• v.43 no.3
• /
• pp.257-264
• /
• 2010

Objectives: An accurate estimation of cancer patients is the basis of epidemiological studies and health services. However in Korea, cancer patients visiting out-patient clinics are usually ruled out of such studies and so these studies are suspected of underestimating the cancer patient population. The purpose of this study is to construct a more complete, hospital-based cancer patient registry using multiple sources of medical information. Methods: We constructed a cancer patient detection algorithm using records from various sources that were obtained from both the in-patients and out-patients seen at Asan Medical Center (AMC) for any reason. The medical data from the potentially incident cancer patients was reviewed four months after first being detected by the algorithm to determine whether these patients actually did or did not have cancer. Results: Besides the traditional practice of reviewing the charts of in-patients upon their discharge, five more sources of information were added for this algorithm, i.e., pathology reports, the national severe disease registry, the reason for treatment, prescriptions of chemotherapeutic agents and radiation therapy reports. The constructed algorithm was observed to have a PPV of 87.04%. Compared to the results of traditional practice, 36.8% of registry failures were avoided using the AMC algorithm. Conclusions: To minimize loss in the cancer registry, various data sources should be utilized, and the AMC algorithm can be a successful model for this. Further research will be required in order to apply novel and innovative technology to the electronic medical records system in order to generate new signals from data that has not been previously used.

• Journal of Korea Multimedia Society
• /
• v.11 no.4
• /
• pp.504-515
• /
• 2008

Fast transmission speeds and various wired network services have been combined with the convenience and mobility of wireless services. The combination of wired/wireless technologies is spreading rapidly since it enables the creation of new services and provides new features to both users and service providers. In such wired/wireless integrated services, network integration is very important because such systems are integrated by a linkage between heterogeneous networks and they involve an integration of transmission technologies across networks. In this situation, existing security and communication technologies are unsuitable since the network are integrated with heterogeneous networks. The network may also have several security flaws. In existing homogeneous networks, user authentication and key management between heterogeneous networks are required for these new technologies. The establishment of security technologies for heterogeneous devices is a very important task between homogeneous networks. In this paper, we propose a secure and efficient key management system for a heterogeneous network environment. Our system provides secure communications between heterogeneous network devices.

• Geosciences Journal
• /
• v.22 no.6
• /
• pp.871-880
• /
• 2018

During and shortly after the 2017 Pohang Earthquake ($M_w$ 5.4), sand blows were observed around the epicenter for the first time since the beginning of instrumental seismic recording in South Korea. We carried out field surveys plus satellite and drone imagery analyses, resulting in observation of approximately 600 sand blows on Quaternary sediment cover in this area. Most were observed within 3 km of the epicenter, with the farthest being 15 km away. In order to investigate the ground's susceptibility to liquefaction, we conducted a trench study of a 30 m-long sand blow in a rice field 1 km from the earthquake epicenter. The physical characteristics of the liquified sediments (grain size, impermeable barriers, saturation, and low overburden pressure) closely matched the optimum ground conditions for liquefaction. Additionally, we found a series of soft sediment deformation structures (SSDSs) within the trench walls, such as load structures and water-escaped structures. The latter were vertically connected to sand blows on the surface, reflecting seismogenic liquefaction involving subsurface deformation during sand blow formation. This genetic linkage suggests that SSDS research would be useful for identifying prehistoric damage-inducing earthquakes ($M_w$ > 5.0) in South Korea because SSDSs have a lower formation threshold and higher preservational potential than geomorphic markers formed by surface ruptures. Thus, future combined studies of Quaternary surface faults and SSDSs are required to provide reliable paleoseismological information in Korea.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.63 no.5
• /
• pp.49-62
• /
• 2021

The objective of this study was to evaluate the flood control capacity of the agricultural reservoir based on state-of-the-art climate change scenario - SSP (Shared Socioeconomic Pathways). 18 agricultural reservoirs were selected as the study sites, and future rainfall data based on SSP scenario provided by CMIP6 (Coupled Model Intercomparison Project 6) was applied to analyze the impact of climate change. The frequency analysis module, the rainfall-runoff module, the reservoir operation module, and their linkage system were built and applied to simulate probable rainfall, maximum inflow, maximum outflow, and maximum water level of the reservoirs. And the maximum values were compared with the design values, such as design flood of reservoirs, design flood of direct downstream, and top of dam elevation, respectively. According to whether or not the maximum values exceed each design value, cases were divided into eight categories; I-O-H, I-O, I-H, I, O-H, O, H, X. Probable rainfall (200-yr frequency, 12-h duration) for observed data (1973~2020) was a maximum of 445.2 mm and increased to 619.1~1,359.7 mm in the future (2011~2100). For the present, 61.1% of the reservoirs corresponded to I-O, which means the reservoirs have sufficient capacity to discharge large inflow; however, there is a risk of overflowing downstream due to excessive outflow. For the future, six reservoirs (Idong, Baekgok, Yedang, Tapjung, Naju, Jangsung) were changed from I-O to I-O-H, which means inflow increases beyond the discharge capacity due to climate change, and there is a risk of collapse due to dam overflow.

• Journal of Convergence for Information Technology
• /
• v.9 no.1
• /
• pp.116-122
• /
• 2019

In recent years, small and medium-sized businesses are rapidly changing to an industrial structure where process/quality/energy data aggregates can be automatically or real-time to achieve global competitiveness. In particular, real-time information analysis produced in the production process of small businesses is evolving into a new process process that analyzes, predicts, prescribes and implements significant performance of small businesses. In this paper, we propose a platform-building model that can transform the automated production information system of small businesses into big data so that they can upgrade data that is generated by small businesses. The proposed model has the capability to support operational efficiency (consulting and training) and strategic decision making of small businesses by utilizing a variety of data on the basic information of products produced by small businesses for data collection by smart SMEs. In addition, the proposed model is characterized by close cooperation between small and medium-sized businesses with different regional characteristics and areas of information sharing and system linkage.