• Journal of Electrical Engineering and Technology
• /
• 제13권4호
• /
• pp.1483-1493
• /
• 2018

Recently, more power facilities are needed to cope with the increasing electric demand. However, the additional construction of generators, transmission and distribution installations is not easy because of environmental problems and citizen's complaints. Under this circumstance, a microgrid system with distributed renewable resources emerges as an alternative of the traditional power systems. Moreover, the configuration of power system changes with more DC loads and more DC installations. This paper is written to introduce an idea of a genetic algorithm-based solution to determine the optimal capacity of the distributed generators depending on the types of system configuration: AC-link, DC-link and Hybrid-link types. In this paper, photovoltaic, wind turbine, energy storage system and diesel generator are considered as distributed generators and the feasibility of the proposed algorithm is verified by comparing the calculated capacity of each distributed resource with HOMER simulation results for 3 types of system configuration.

• 한국통신학회논문지
• /
• 제39C권1호
• /
• pp.106-113
• /
• 2014

This work proposes an analytic framework to estimate the capacity of the link in an M2M gateway that multiplexes a massive number of machine type communication devices. First, we specify the network architecture for M2M communications. Next, we summarize the characteristics of M2M traffic, from which we extract an area about the problem that has to be resolved in the dimensioning of the link capacity. After that we propose a new method to determine the capacity of the link in an M2M gateway. Via numerical experiment reflecting the realistic environment of M2M traffic, we illustrate the validity of the proposed model.

• Communications for Statistical Applications and Methods
• /
• 제16권6호
• /
• pp.937-943
• /
• 2009

가변용량 네트워크에서의 각 링크는 서로 독립이며 용량한계가 설정되어 있다. 각 링크는 각동하거나 작동불능의 두 상태로 구별되며 작동불능 상태의 링크는 유량을 통과시킬 수 없다. 주어진 네트워크는 미리 설정된 기정용량이상의 최대 전송용량이 가능할 때 작동된다고 한다. 본 논문에서는 가변용량 네트워크에서 기정용량이 주어졌을 때의 각 링크의 용량에 관한 구조적 중요도와 신뢰성 중요도를 정의하고, 네트워크 성능지수에 관련한 링크 중요도 척도를 제시한다. 또한 다양한 구조의 네트워크에서의 수치예제를 통하여 제시된 척도를 비교분석한다.

• 한국통신학회논문지
• /
• 제26권12B호
• /
• pp.1686-1694
• /
• 2001

본 논문에서는 Hot-spot 마이크로셀을 가진 계층적 CDMA 셀룰러 시스템에서 여러 가지 자원 공유 방식들 중 스펙트럼 공유 방식에 대한 용량을 역방향 링크와 순방향 링크 대해 분석한다. 용량 분석은 마이크로셀 반경 및 마이크로셀의 위치 및 매크로셀에 대한 마이크로셀의 전력 비를 고려하여 몬테카를로 시뮬레이션을 통해 수행된다. 시뮬레이션 결과로부터 스펙트럼 공유 방식의 용량을 각 링크에 대해 이러한 영향들을 분석하였고, 일반적인 설계 접근방식을 제시하였다. 또한 각 링크에 대해 스펙트럼 공유 방식의 성능을 용량 평면도를 통해 분석하였다

• 한국통신학회논문지
• /
• 제22권3호
• /
• pp.571-579
• /
• 1997

There are some transmission types on the reverse link of wideband DS-CDMA cellular system. The configurations of logical channels on the reverse link may be different dependent upon the transmission methods of reverse pilot or control signaling. In this paper, we present three transmission types on the wideband DS-CDMA reverse link; no-pilot system, pilot-channel aided system and pilot-symbol aided system. And we compare the performance of three systems in terms of capacity and cell coverage. The pilot-symbol aided system is shown to have the better performance than the pilot-channel aided system in both capacity and cell coverage.

• Journal of information and communication convergence engineering
• /
• 제16권1호
• /
• pp.31-37
• /
• 2018

In this work, we propose an analytic framework for evaluating the quality of service and dimensioning the link capacity in the gateway router of a smart farm with a greenhouse eco-management system. Specifically, we focus on the gateway router of an IoT network that provides an access service for smart farms. We design the link capacity of a gateway router that is used for the remote management of the greenhouse eco-management system to accommodate both time-critical and delay-tolerant traffic in a greenhouse LAN. For this purpose, we first investigate the ecosystem for smart farm, and we define the specification and requirements of the greenhouse eco-management system. Second, we propose a system model for the link capacity of a gateway that is required to guarantee the delay performance of time-critical applications in the greenhouse LAN. Finally, the validity of the proposed system is demonstrated through a series of numerical experiments.

• 한국통신학회논문지
• /
• 제21권6호
• /
• pp.1501-1509
• /
• 1996

Mobile stations can be classified by the transmission power level in CDMA system. Different performance parameters will be given to each class of mobile stations so that the appropriate quality ofservices can be provided. In this paper, it is assumed that there are two clsses of mobile stations. with the classification of mobile stations, analytical models are presented for the estimates of the reverse link capacity and the blocking probability. From the model for the reverse link capacity, the maximum number of each class of mobile stations to be served is derived. It is shown that $E_{b/}$I reduction of 1 dB allows the capacity to be increased by 25% and the data transmission rate and the power control accuracy have a significant effect on the reverse link capacity and the blocking probability. Simulation results are provided for validating the anlaytical estimates of the blocking probability.ocking probability.y.

• Steel and Composite Structures
• /
• 제24권4호
• /
• pp.441-453
• /
• 2017

In Y-shaped eccentrically braced frame fabricated with high strength steel (Y-HSS-EBF), link uses conventional steel while other structural members use high strength steel. Cyclic test for a 1:2 length scaled one-bay and one-story Y-HSS-EBF specimen and shake table test for a 1:2 length scaled three-story Y-HSS-EBF specimen were carried out to research the seismic performance of Y-HSS-EBF. These include the failure mode, load-bearing capacity, ductility, energy dissipation capacity, dynamic properties, acceleration responses, displacement responses, and dynamic strain responses. The test results indicated that the one-bay and one-story Y-HSS-EBF specimen had good load-bearing capacity and ductility capacity. The three-story specimen cumulative structural damage and deformation increased, while its stiffness decreased. There was no plastic deformation observed in the braces, beams, or columns in the three-story Y-HSS-EBF specimen, and there was no danger of collapse during the seismic loads. The designed shear link dissipated the energy via shear deformation during the seismic loads. When the specimen was fractured, the maximum link plastic rotation angle was higher than 0.08 rad for the shear link in AISC341-10. The Y-HSS-EBF is a safe dual system with reliable hysteretic behaviors and seismic performance.

• Journal of Communications and Networks
• /
• 제11권3호
• /
• pp.271-278
• /
• 2009

A new modulation scheme called multicoded-pulse position modulation (MC-PPM) is proposed for an ultrawideband (UWB) impulse radio communication system. The multicoded signal is generated by using several orthogonal codes for transmitting data simultaneously. Then, each multi-level value of the multicoded signal is converted to pulse position which results in not only an improved data rate, but also a processing gain in reception, delivering the power-efficient benefit of PPM and guaranteeing the low pulse energy for UWB systems. We notice that the modulation of multi-level values of the multicoded signal to pulse position is more efficient in terms of achievable data rate than the modulation of transmitting data based on other PPM schemes within given bandwidth and pulse energy. Therefore, as a performance measure, we focus on the achievable data rate (link capacity) of the proposed scheme and analyze it theoretically. Through simulation, we compare the link capacity of the MC-PPM scheme and other PPM schemes, such as M -ary PPM and multiple PPM. With the fixed bandwidth and same pulse energy condition, the UWB system based on the proposed MC-PPM scheme shows good link capacity and an increased data rate as L increases, which is contrary to other PPM schemes.

• Earthquakes and Structures
• /
• 제5권2호
• /
• pp.143-160
• /
• 2013

This paper presents the results of an experimental program concerning the efficiency of a specific strengthening technique which utilizes a small steel link element connected to the R/C frame through bracing elements. Brittle types of failure, especially at the connections between steel and concrete elements, can be avoided by appropriate design of the local details. Five single storey one bay R/C frames scaled 1:3 were constructed according to older codes with substandard details. The first one was a typical bare reference frame. The other four were identical to the first one, strengthened by steel bracing elements. The behavior of the strengthened frames is described with respect to the reference bare frame. The concrete frames were constructed according to older code provisions by the use of smooth steel bars, low strength concrete, sparsely spaced stirrups and substandard details. The strengthening scheme aimed to the increase of both strength and deformation capacity of the original R/C frame. The inelastic deformations are purposely concentrated to a short steel link element connecting the steel bracing to the R/C frame. The results show that the steel link element can increase considerably the strength and the energy dissipation capacity of the frame.