• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.6
• /
• pp.30-36
• /
• 1999

Jamming is an important factor in the military satellite communication system. In this paper, link capacity and jamming margin of the DS-CDMA(Direct Sequence-Code Division Multiple Access) military satellite communication system are analyzed and calculated under a multitone jamming. The analysis was performed with two types of transponders loaded on a geosynchronous satellite. Calculation methods for link capacity and jamming margin were obtained. The results of the analysis show that capacity of a transponder which does modulation/demodulation, decoding/encoding in addition to despreading/respeading is twice as much as that of a tranponder which does despreading /respreading only.

• Natural Product Sciences
• /
• v.11 no.2
• /
• pp.109-114
• /
• 2005

Leucas aspera Link. (Lamiaceae) is an important medicinal plant in indigenous systems of medicine in India and commonly known as 'Thumbai'. It has various ethnomedicinal values as various traditional communities find diverse medicinal properties. It is used as antipyretic, stimulant, expectorant and diaphoretic drug. The present communication deals with the detailed pharmacognostical evaluation of whole plant of L. aspera collected from five different geographical zones of the country-Uttar Pradesh, Orissa, Karnataka, West Bengal and Gujarat. The botanical characters and TLC fingerprint profile of all the samples were quite similar but some variations were observed in physicochemical parameters. However, some microscopical characters and TLC profile can be used as diagnostic characters for identification of L. aspera, for example amphistomachic leaves and two types of trichomes-abundant, non glandular, uniseriate, 1-3 celled and few glandular, 2-5 celled stalk with rounded tip. Presence of some components at $R_fs-0.56$, 0.65 and 0.76 under UV 366 and at $R_fs-0.31$, 0.43, 0.60, 0.76 and 0.82 under visible light after derivetization in TLC profile may also be used as diagnostic character.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2357-2360
• /
• 2002

For the satisfying performance of a oil lubricator, design of a oil controller for the system which meets the required specifications and its supporting hardware that keep their functioning is important. Among the hardware of a control system, oil system are most vulnerable to malfunction. Thus it is necessary to keep track of accurate and reliable oil readings for good fusion oil lubricator performance. In case of oil lubricator, data loss, ssr trigger error faults, they are detected by examining the data system output values and the major values of the system, and then the faults are recognized by the analysis of symptoms of faults. If necessary electronic-sensor values are synthesized according to the types of faults, and then they are used for the controller instead of the raw data. In this paper, a fast-32bit cpu microprocessor applied to the control of flexible link system with the sensor fault problems in the error modulo for exact positioning to show the applicability. It is shown that the fusion oil lubricator can provide a satisfactory loop performance even when the sensor faults occure.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.16 no.1
• /
• pp.53-58
• /
• 2003

Carbon fiber sheet has been used to rehabilitate many types of reinforced concrete members with its superior characteristics such as their lightweight, high strength, corrosion resistance, and easy execution. But the failure behavior of reinforced concrete members show a high variation by the bond characteristics between carbon fiber sheet and concrete surface. In this study, a bond stress-slip model, which accounts for changes in bonding behavior between concrete and carbon fiber sheet with some link elements, is proposed. The link elements are used to represent the concrete-carbon fiber sheet interface. To investigate the efficiency of this method, the analytical solutions for the behavior of reinforced concrete beam strengthened with carbon fiber sheet are compared with experimental ones. Results from the proposed model comparatively well agree with the experimental results.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05a
• /
• pp.137-140
• /
• 2002

For the satisfying performance of a oil lubricator, design of a oil controller for the system which meets the required specifications and its supporting hardware that keep their functioning is important. Among the hardware of a control system, oil system are most vulnerable to malfunction. Thus it is necessary to keep track of accurate and reliable oil readings for good fusion oil lubricator performance. In case of oil lubricator, data loss, ssr trigger error faults, they are detected by examining the data system output values and the major values of the system, and then the faults are recognized by the analysis of symptoms of faults. If necessary electronic-sensor values are synthesized according to the types of faults, and then they are used for the controller instead of the raw data. In this paper, a fast-32bit cpu micorprocessor applied to the control of flexible link system with the sensor fault problems in the error module for exact positioning to show the applicability. It is shown that the fusion oil lubricator can provide a satisfactory loop performance even when the sensor faults occure

• Journal of information and communication convergence engineering
• /
• v.2 no.1
• /
• pp.9-14
• /
• 2004

In this paper the modeling of the RLP layer in CDMA2000 is presented, which uses the NAK based ARQ scheme for Random Error Channels. The RLP performs a partial link recovery through limited number of RLP frame transmission in case of frame error. In case when the RLP fails due to excessive frame error, the control is passed on to the higher (TCP) layer. The TCP layer provides the complete end-to-end recovery. Thus the reliable performance at the TCP/RLP is essential to maintain the required Quality of Service in the DS-CDMA wireless links. The modeling is done for the performance analysis of the system in terms of the throughput and the mean extra delays, which are calculated analytically and are compared with the results generated by the simulations. This paper studies the effect of the random errors over different types of RLP frame formats and also the performance of the NAK based ARQ mechanism used under these conditions. The simulation provides with the over all characteristics of the throughput and the mean extra delay in terms of realistic environment parameters like Eb/No and probability of packet error (PE), based on the channel conditions.

• Structural Engineering and Mechanics
• /
• v.8 no.2
• /
• pp.207-231
• /
• 1999

A versatile 4-node shell element which is useful for the analysis of arbitrary shell structures is presented. The element is developed by flat shell approach, i.e., by combining a membrane element with a Mindlin plate element. The proposed element has six degrees of freedom per node and permits an easy connection to other types of finite elements. In the plate bending part, an improved Mindlin plate has been established by the combined use of the addition of non-conforming displacement modes (N) and the substitute shear strain fields (S). In the membrane part, the nonconforming displacement modes are also added to the displacement fields to improve the behavior of membrane element with drilling degrees of freedom and the modified numerical integration (M) is used to overcome the membrane locking problem. Thus the element is designated as NMS-4F. The rigid link correction technique is adopted to consider the effect of out-of-plane warping. The shell element proposed herein passes the patch tests, does not show any spurious mechanism and does not produce shear and membrane locking phenomena. It is shown that the element produces reliable solutions even for the distorted meshes through the analysis of benchmark problems.

• Korean Journal of Optics and Photonics
• /
• v.22 no.3
• /
• pp.122-128
• /
• 2011

The AWG-filtering effect was investigated on a bidirectional 100-GHz-channel-spacing WDM-PON link using spectrum-sliced and RSOA-amplified light sources for downstream signals and a wavelength reuse technique for upstream signals. Signal performances of three different filtering AWGs, including Gaussian, trapezoidal, and rectangular types, were compared on link transmission with fiber nonlinear effects. As an extinction ratio of a downstream signal varied, the effect for both directional signals was analyzed and optimized. It was found that there was an optimal pass bandwidth of an AWG for the balance between relative intensity noise decrement and cross phase modulation noise increment as the bandwidth got wider.

• Korean Journal of Materials Research
• /
• v.33 no.8
• /
• pp.323-329
• /
• 2023

There are many types of foam molding methods. The most commonly used methods are the pressure foaming method, in which foam resin is mixed with a foaming agent at high temperature and high pressure, and the normal pressure foaming method, which foams at high temperature without pressure. The polymer resins used for foaming have different viscosities. For foaming under normal pressure, they need to be designed and analyzed for optimal foaming conditions, to obtain resins with low melt-viscosity or a narrow optimal viscosity range. This study investigated how changes in viscosity, molding temperature, and cross-link foaming conditions affected the characteristics of the molded foam, prepared by blending rubber polymer with biodegradable resin. The morphologies of cross sections and the cell structures of the normal pressure foam were investigated by SEM analysis. Properties were also studied according to cross-link/foaming conditions and torque. Also, the correlation between foaming characteristics was studied by analyzing tensile strength and elongation, which are mechanical properties of foaming composites.

• Journal of the Ergonomics Society of Korea
• /
• v.33 no.4
• /
• pp.281-287
• /
• 2014

Objective: The objective of the study is to develop a portable assistance device to help elderly users reduce strain on the knee and leg muscle while the elderly are standing up. Background: The pose of standing up from a chair is a basic movement, but the elderly often have difficulty standing up due to their weak muscles. We focus on designing a solution that helps the elderly reduce physical problems and support them standing up. Method: This study consists of three parts. Part I explores the way to reduce the refrain of leg muscle while standing up from a chair. In the process of structural development, we found that the moment is minimized when user pushes down the armrests due to a decrease in the force acting on the center of mass. In part II, a user test of 20 participants was carried out to rank the order of comfort of two stimuli: the chair with fixed armrests and the chair with the four-link mechanism that we created-in three different ways; (1) to stand up without touching armrests, (2) to stand up by pushing down on fixed armrests, and (3) to stand up by pushing down on armrests and being supported by the mechanism. To examine the statistically significant differences among the rank means, a Friedman test was conducted. In part III, we analyze the results of the user test and interview feedbacks, focusing on establishing a design strategy from UPO and visualizing it in 1:1 scale. Results: In part I, we decided to develop the four-link mechanism. The bottom is lifted up as the link rises. In part II, based on the rank data, we empirically found that UPO was assessed as the most comfortable during the stimuli. The thigh angle is smaller and the bottom of UPO is separated from a seat. In part III, after assessing the results and feedbacks, we created a visualization strategy for UPO: light, friendly, and novel. Conclusion: The portable and non-mechanical UPO comprises a four-link system that lifts the user's hips while standing. It can help users avoid knee and leg muscle strain. Its universal design considers the elderly's difficulties. Application: In a future study, combining light and durable material in UPO is expected to increase its usability. And this study is an opportunity to design various types of standing assistance devices.