• The Journal of the Korea institute of electronic communication sciences
• /
• v.4 no.3
• /
• pp.236-242
• /
• 2009

When two-link flexible arm is rotated about an joint axis, transverse vibration may occur. In this paper, vibration dynamics of flexible robot arm is modeled by using Bernoulli-Euler beam theory and Lagrange equation. Using the fact that matrix $\dot{D}$-2C is skew symmetric, new controllers which have a simplified structure with less computational burden is proposed. Lyapunov stability theory is applied to achieve a stable deterministic nonlinear controller for the regulation of joint angle.

• International Journal of Control, Automation, and Systems
• /
• v.6 no.2
• /
• pp.223-233
• /
• 2008

A new output feedback controller design approach for flexible-joint (FJ) robots via the observer dynamic surface design technique is presented. The proposed approach only requires the feedback of position states. We first design an observer to estimate the link and actuator velocity information. Then, the link position tracking controller using the observer dynamic surface design procedure is developed. Therefore, the proposed controller can be simpler than the observer backstepping controller. From the Lyapunov stability analysis, it is shown that all signals in a closed-loop system are uniformly ultimately bounded. Finally, the simulation results of a three-link FJ robot are presented to validate the good position tracking performance of the proposed control system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.8
• /
• pp.774-779
• /
• 2012

We design and implement a RTT (Round Trip Time) based TCP (Transmission Control Protocol) for USN (Ubiquitous Sensor Network). We adopt a basic update algorithm for window size from FAST TCP that uses the queuing delay at link as the congestion measure. The designed TCP estimates the queuing delay at link from the measured RTT in the network layer, and updates the window size based on the estimated queuing delay. The designed TCP allows to utilize the full capacity of USN links and avoids the waste of the given link capacity that is common without the flow control in the transport layer. The experiment results show that the window size of the sender converges within a small range of variations without any packet loss, and verify the stability and performance of the designed TCP.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.49 no.8
• /
• pp.529-535
• /
• 2000

In this paper, a current control system of a single phase PWM AC/DC converter using a reduced-order Luenberger observer without source voltage sensors is proposed. The sinusoidal input current and unity input power factor are realised based on the estimated source voltage performed by the reduced-order Luenberger observer using actual currents and DC link voltage. The poles of the reduced-order Luenberger observer are placed in the left half plane of s-plane by the pole-placement method in order to acquire the stability of the observer. The magnitude and the phase of the estimated source voltage are used to accomplish the unity power factor. The proposed method is implemented by DSP(Digital Signal Processor). Experimental Results verify that the reduced-order observer estimates the source voltage without the estimation error and the control system accomplishes the unity power factor, and constant DC link voltage.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.6
• /
• pp.62-70
• /
• 2008

An adaptive fuzzy backstepping controller is proposed for the motion control for a single-link flexible-joint robot in the presence of parametric uncertainties. Fuzzy logic system is used to approximate the uncertainties of functions and a backstepping technique is employed to deal with the mismatched problem. A compensation controller is also employed to estimates the bound of approximation error so that the shattering effect of the control effort can be reduced. Thus the asymptotic stability of the closed loop control system can be obtained based on a Lyapunov synthesis approach. Numerical simulation results for a single-link flexible-joint robot are included to show the effectiveness of proposed controller.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.137-144
• /
• 2003

Continuous road improvement is required by situation that need link between cities by special quality that is our country's topography enemy that most of country have consisted to mountain district. According to this, occurrence of large cutting slope is formed necessarily Cutting slope are very weak real condition because of concentrative downpour and can know easily by example of typhoon Rusa. This study did helpful in slope design and carrying out suitable reinforcing method.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.902-907
• /
• 1993

An efficient dynamic control algorithm that outperforms existing local torque optimization techniques for redundant manipulators is presented. The method resolves redundancy at the acceleration level. In this method, a systematic switching technique as a trade-off means between local torque optimization and global stability is proposed based on the stability condition proposed by Maciejewski [1]. Comparative simulations on a three-link planar arm show the effectiveness of the proposed method.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.101-104
• /
• 2000

Nowadays, the issue of congestion control in high-speed communication networks becomes critical in view of the bandwidth-delay products for efficient data flow. In particular, the fact that the congestion is often accompanied by the data flow from the high-speed link to low-speed link is important with respect to the stability of closed-loop congestion control. The Virtual-Connection Network (VCN) in Gigabit Ethernet networks is a packet-switching based network capable of implementing cell- based connection, link-by-link flow-controlled connection, and single- or multi-destination virtual connections. VCN described herein differ from the virtual channel in ATM literature in that VCN have link-by-link flow control and can be of multi-destination. VCNs support both connection-oriented and connectionless data link layer traffic. Therefore, the worst collision scenario in Ethernet CSMA/CD with virtual collision brings about end-to-end delay. Gigabit Ethernet networks based on CSMA/CD results in non-deterministic behavior because its media access rules are based on random probability. Hence, it is difficult to obtain any sound mathematical formulation for congestion control without employing random processes or fluid-flow models. In this paper, an analytical method for the design of a congestion control scheme is proposed based on Smith＇s principle to overcome instability accompanied with the increase of end-to-end delays as well as to avoid cell losses. To this end, mathematical analysis is provided such that the proposed control scheme guarantees the performance improvement with respect to bandwidth and latency for selected network links with different propagation delays. In addition, guaranteed bandwidth is to be implemented by allowing individual stations to burst several frames at a time without intervening round-trip idle time.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.811-814
• /
• 2009

The HF band maritime communication is have developing to digital methode that techniques should be readied the automatic link establishment of 1:N by coast station to many ship station. Because can use way by polling simply that communication environment calls particular station wicked fellow HF communication states which is much redundancy times for coast station to set link. In amateur radio particular station selective calling do to be using ALE(Automatic Link Establishment) controller by 1:1 automatic link setting way, but expect 1:N link setting by these way in maritime communication very difficult. That is difficult to avoid collision by traffic overload to induce calling of ship stations. Because HF communication considers channel special quality traffic state radio link should be established, and should be applied automatically secures stability of channel as accommodative at traffic overload. In this paper is studied the new radio protocol by 3 step sequency driving of free access, group free access and polling access using multi-tone in single channel.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.12
• /
• pp.5729-5744
• /
• 2017

Vehicular Ad Hoc Networks (VANET) in the large-scale road section usually have typical characteristics of large number of vehicles and unevenly distribution over geographic spaces. These two inherent characteristics lead to the unsatisfactory performance of VANETs. This poor performance is mainly due to fragile communication link and low dissemination efficiency. We propose a novel routing mechanism to address the issue in the paper, which includes a competition-based routing discovery with priority metrics and a local routing repair strategy. In the routing discovery stage, the algorithm uses adaptive scheme to select a stable route by the priorities of routing metrics, which are the length of each hop, as well as the residual lifetime of each link. Comparisons of different ratios over link length and link stability further show outstanding improvements. In the routing repair process, upstream and downstream nodes also compete for the right to establish repair process and to remain as a member of the active route after repair. Our simulation results confirm the improved performance of the proposed algorithm.