• 대한치과교정학회지
• /
• 제52권4호
• /
• pp.268-277
• /
• 2022

Objective: Poor experience with Invisalign treatment affects patient compliance and, thus, treatment outcome. Knowing the potential discomfort level in advance can help orthodontists better prepare the patient to overcome the difficult stage. This study aimed to construct artificial neural networks (ANNs) to predict patient experience in the early stages of Invisalign treatment. Methods: In total, 196 patients were enrolled. Data collection included questionnaires on pain, anxiety, and quality of life (QoL). A four-layer fully connected multilayer perception with three backpropagations was constructed to predict patient experience of the treatment. The input data comprised 17 clinical features. The partial derivative method was used to calculate the relative contributions of each input in the ANNs. Results: The predictive success rates for pain, anxiety, and QoL were 87.7%, 93.4%, and 92.4%, respectively. ANNs for predicting pain, anxiety, and QoL yielded areas under the curve of 0.963, 0.992, and 0.982, respectively. The number of teeth with lingual attachments was the most important factor affecting the outcome of negative experience, followed by the number of lingual buttons and upper incisors with attachments. Conclusions: The constructed ANNs in this preliminary study show good accuracy in predicting patient experience (i.e., pain, anxiety, and QoL) of Invisalign treatment. Artificial intelligence system developed for predicting patient comfort has potential for clinical application to enhance patient compliance.

• 대한치과교정학회지
• /
• 제22권4호
• /
• pp.869-880
• /
• 1992

The purpose of this study was to evaluate the difference and relationship between the slope of articular eminence and the inclination of upper and lower incisor teeth, which are related to the functional stability of occlusion in mandibular protrusion, according to Ricketts' facial types, by the use of lateral cephalogram and SAM2 articulator in 68-adult normal occlusion without tooth missing, orthodontic treatment and occlusal equilibration. The results of this study were as follows : 1 . The angle of articular eminence slope to occlusal plane in brachyfacial type was steeper than that in dolichofacial type, but the angle of articular eminence slope to SN plane and FH plane was not different between facial types. 2. The upper incisor axis in dolichofacial type was steeper than that in brachyfacial type, but lingual surface slope of upper incisor was not different between facial types. 3. In all samples there was a positive correlation between the angle of articular eminence slope and the lingual surface slope of upper incisor to SN plane and FH plane, and in mesofacial type there was a positive correlation between the angle of articular eminence slope and the lingual surface slope of upper incisor to SN plane, FH plane and occlusal plane, and in brachyfacial type there was a positive correlation between the angle of articular eminence slope and the lingual surface slope of upper incisor to occlusal plane. 4. In all samples there was a positive correlation between the angle of articular eminence slope and the angle of Dc-Gn to SN plane, and in mesofacial type there was a positive correlation between the angle of articular eminence slope and the angle of Dc-Gn to occlusal plane, and in brachyfacial type there was a positive correlation between the angle of articular eminence slope and the angle of Dc-Gn to SN plane and FH plane. 5. In all samples there was a positive correlation between the angle of Dc-Gn and the lingual surface slope of upper incisor to SN plane and FH plane, and in mesofacial type there was a positive correlation between the angle of Dc-Gn and the lingual surface slope of upper incisor to SN plane. 6. In all samples and facial types there was a negative correlation between MP to 1 axis and condylar incisal angle.

• 대한치과교정학회지
• /
• 제16권1호
• /
• pp.155-165
• /
• 1986

Recently, straight-wire appliance is widely used with great concern in clinical orthodontic field. The purpose of this study was to collect the information of the straight-wire appliance and to determine the crown inclination in clinical orthodontics. The author analyzed the study model of 78 individuals with normal occlusion. The obtained results were as follows. 1. Mean, maximum value, minimum value and standard deviation of crown inclination of upper and lower teeth were obtained. 2. The lingual crown inclination of upper tooth had constant value from first premolar through second molar, the lingual crown inclination of lower tooth progressively increased from canine through second molar. 3. As Howes' ratio was decreased, the crown inclination of upper incisors was increased. 4. Narrowing the upper arch, the crown inclination of upper incisors was increased.

• 대한치과교정학회지
• /
• 제18권1호
• /
• pp.217-225
• /
• 1988

This study was undertaken to examine relationship between tooth size and arch dimension in dental crowding. Two groups of dental casts were selected on the basis of dental crowding. One group, consisting of 51 pairs of dental casts (24 male and 27 female), exhibited remarkable dental crowding. A second group, consisting of 60 pairs of dental casts (30 male and 30 female), exhibited little or no crowding. Mean and standard deviation of the following parameters were used to compare two groups. individual and collective mesiodistal tooth diameters, buccal and lingual arch widths and arch area. The following results were obtained. 1. The crowed group revealed larger tooth size than noncrowded group. (p < 0.01) 2. The crowded group smaller maxillary dental arch dimension than noncrowded group except lingual arch width at canine region. (p < 0.01) 3. The corwded group revealed smaller mandibular dental arch dimension than noncrowded group except lingal arch width at second premalar region in the male and buccal arch width at canine, premolar region in the female. (p < 0.01) 4. The crowded group revealed smaller arch area than noncrowded group in the female (p < 0.01), but there was no significance in the male.

• 대한치과의사협회지
• /
• 제40권10호통권401호
• /
• pp.787-794
• /
• 2002

• 대한치과교정학회지
• /
• 제43권4호
• /
• pp.186-192
• /
• 2013

Objective: To analyze the fatigue resistance, debonding force, and failure type of fiber-reinforced composite, polyethylene ribbon-reinforced, and braided stainless steel wire lingual retainers in vitro. Methods: Roots of human mandibular central incisors were covered with silicone, mimicking the periodontal ligament, and embedded in polymethylmethacrylate. The specimens (N = 50), with two teeth each, were randomly divided into five groups (n = 10/group) according to the retainer materials: (1) Interlig (E-glass), (2) everStick Ortho (E-glass), (3) DentaPreg Splint (S2-glass), (4) Ribbond (polyethylene), and (5) Quad Cat wire (stainless steel). After the recommended adhesive procedures, the retainers were bonded to the teeth by using flowable composite resin (Tetric Flow). The teeth were subjected to 10,00,000 cyclic loads (8 Hz, 3 - 100 N, $45^{\circ}$ angle, under $37{\pm}3^{\circ}C$ water) at their incisoproximal contact, and debonding forces were measured with a universal testing machine (1 mm/min crosshead speed). Failure sites were examined under a stereomicroscope (${\times}40$ magnification). Data were analyzed by one-way analysis of variance. Results: All the specimens survived the cyclic loading. Their mean debonding forces were not significantly different (p > 0.05). The DentaPreg Splint group (80%) showed the highest incidence of complete adhesive debonding, followed by the Interlig group (60%). The everStick Ortho group (80%) presented predominantly partial adhesive debonding. The Quad Cat wire group (50%) presented overlying composite detachment. Conclusions: Cyclic loading did not cause debonding. The retainers presented similar debonding forces but different failure types. Braided stainless steel wire retainers presented the most repairable failure type.

• 대한치과교정학회지
• /
• 제18권1호
• /
• pp.7-24
• /
• 1988

The stable occlusion in function is thought as important as the esthetics in form, in order to preserve the healthy oral condition. The stable occlusion requires the harmony between the condylar guidance factors and the anterior guidance factors. The aim of this study was to evaluate the quantitative relationship between the condylar guidance factors and the anterior guidance factors, estimating statistically the measurement of the condylar paths by Pantronic and those of the anterior guidance factors, craniofacial morphology by roentgenocephalometry in 46 relatively good functional occlusion. The results of this study were as follows. 1. The measurements of the protrusive condylar path inclinations were $36.41^{\circ}$ in the right, $35.63^{\circ}$ in the left, $36.28^{\circ}$ in the mean. The measurements of Fisher's angles were $8.17^{\circ}$ in the right, $6.43^{\circ}$ in the left, $6.87^{\circ}$ in the mean. 2. The anterior facial height and the lower anterior facial height made a negative correlation with the protrusive condylar path inclination. 3. The articular eminence angle relative to the artificial articulator plane showed a positive correlation with the maximum protrusive condylar path. 4. SNA and SNB made a negative correlation with the articular eminence angle, and AAP-GoMe, AAP-DcGn, the facial height ratio had a positive correlation with the articular eminence angle. 5. The angulation of maxillary incisor lingual slope, overbite and the ratio of overbite to overiet showed a positive correlation with the articular eminence angle. 6. The angulation of maxillary incisor lingual slope , overbite, and the ratio of overbite to overjet made a positive correlation with the inclination of occlusal plane, functional occlusal plane. 7. Overbite and the ratio of overbite to overjet had a positive correlation with the angulation of maxillary incisor lingual slope. 8. The anterior guidance factors were more influenced by the mean protrusive condylar path inclination and the maximum Fisher's angle, and the regression equations of those were made.

• 대한치과교정학회지
• /
• 제37권3호
• /
• pp.220-230
• /
• 2007

골격성 I급이면서 수직적으로 정상인 환자 160명(남자 80명, 여자 80명)의 측모 두부방사선 계측사진을 대상으로 하악 전치부 치조골의 협설측 두께를 치축을 기준으로 계측하여 연령에 따른 차이를 조사하여 다음과 같은 결과를 얻었다. 하악전치부 치조골의 협설측 두께와 하악 전치부 설측 치조골의 두께는 연령이 증가함에 따라 여자의 CEJ 하방 2 mm 부위를 제외하고는 남녀 모두에서 유의한 감소를 보였다. 반면에, 하악 전치부 협측 치조골의 두께와 하악 이부 최대 풍융부의 두께는 연령이 증가함에 따라 유의한 차이를 보이지 않았다. 이상의 연구를 통하여 한국인에 있어서 수평적으로 I급의 골격형태이면서 수직적으로 정상인 환자에서는 성인보다는 성장기환자에서 하악 전치의 설측 치조골의 두께가 더 두꺼워 발치치료에서와 같은 하악 전치의 설측이동이 유리할 것으로 사료된다.

• 대한치과교정학회지
• /
• 제47권1호
• /
• pp.21-30
• /
• 2017

Objective: The aim of this study was to investigate the three-dimensional (3D) position of the center of resistance of 4 mandibular anterior teeth, 6 mandibular anterior teeth, and the complete mandibular dentition by using 3D finite-element analysis. Methods: Finite-element models included the complete mandibular dentition, periodontal ligament, and alveolar bone. The crowns of teeth in each group were fixed with buccal and lingual arch wires and lingual splint wires to minimize individual tooth movement and to evenly disperse the forces onto the teeth. Each group of teeth was subdivided into 0.5-mm intervals horizontally and vertically, and a force of 200 g was applied on each group. The center of resistance was defined as the point where the applied force induced parallel movement. Results: The center of resistance of the 4 mandibular anterior teeth group was 13.0 mm apical and 6.0 mm posterior, that of the 6 mandibular anterior teeth group was 13.5 mm apical and 8.5 mm posterior, and that of the complete mandibular dentition group was 13.5 mm apical and 25.0 mm posterior to the incisal edge of the mandibular central incisors. Conclusions: Finite-element analysis was useful in determining the 3D position of the center of resistance of the 4 mandibular anterior teeth group, 6 mandibular anterior teeth group, and complete mandibular dentition group.

• Journal of Korean Dental Science
• /
• 제16권1호
• /
• pp.23-34
• /
• 2023

Purpose: This study aims to investigate the force delivery profile of thermoformed aligners (TFA) compared with direct-printed aligners (DPA) and to explore the effect of different activation amounts on forces and moments of respective groups. A secondary objective is to observe the amount of stress relaxation that occurs over the 7~14 days when aligners are maintained in a simulated intraoral environment. Materials and Methods: An in vitro setup was created to quantify forces and moments. It consisted of a three dimensional-printed base plate and segmented maxillary teeth, placed in a semi-enclosed chamber to maintain a temperature of 37℃. Ninety clear aligners were divided into nine groups of ten aligners each based on material types (Zendura, ATMOS, TC-85) and activation amounts. Aligners were created with 0.00, 0.25- and 0.50-mm activations for lingual bodily movement of the upper left central incisor and kept on models in the "stressed" position in a 37℃ water bath. Three force components acting on the upper left lateral incisor, upper left central incisor, and upper right central incisor were measured for each time point, beginning from the initial baseline measurement, 8 hours, 16 hours, 24 hours, 2 days, 3 days, 4 days, 5 days, 6 days, 7 days, and lastly, 14 days. Result: TC-85 aligners in every activation group showed less force on teeth than Zendura and ATMOS. Significant force levels from 0.0 mm activation were present and stayed consistent over the course of 14 days. Comparisons made for baseline measurements to 7-days and 14-days showed statistically significant change from the baseline force level. Conclusion: TC-85 aligners demonstrated lower, more consistent forces with fewer side effects. Aligners can generate forces even when no activation is programmed. No major decreases in force levels over time were observed; the intra-oral clinical simulated environment and length of observation time could contribute to this.