• 한국정밀공학회지
• /
• 제20권1호
• /
• pp.205-213
• /
• 2003

The fiber reinforced composite material is widely used in the multi-industrial field where the weight reduction of the infrastructure is demanded because of their high specific modulus and specific strength. It has two main merits which are to cut down energy by reducing weight and to prevent explosive damage preceding to the sudden bursting which is generated by the pressure leakage condition. Therefore, Pressure vessels using this composite material in comparison with conventional metal vessels can be applied in the field such as defense industry, aerospace industry and rocket motor case where lightweight and the high pressure are demanded. In this paper, for nonlinear finite element analysis of E-glass/epoxy filament winding composite pressure vessel receiving an internal pressure, the standard interpretation model is developed by using the ANSYS, general commercial software, which is verified as the accuracy and useful characteristic of the solution based on Auto LISP and ANSYS APDL. Both the preprocessor for doing exclusive analysis of filament winding composite pressure vessel and postprocessor that simplifies result of analysis have been developed to help the design engineers.

• 한국항공우주학회지
• /
• 제32권4호
• /
• pp.67-72
• /
• 2004

경험식을 이용한 1차원 해석에 의하여 30톤급 재생냉각 연소기의 냉각 유로 설계를 수행하였다. 1차원 해석에 의한 벽온도는 3차원 CFD 해석과 비교하여 약 100 K의 온도차이를 보였다. 동일한 냉각성능을 유지하면서 냉각 채널의 최대 폭이 4mm 와 2mm인 두 가지 설계안을 제시하였다. 냉각유체의 압력강하는 20% 증가할 것으로 예측되었다. 열차 폐 코팅과 탄소 침착물의 열저항을 고려한 경우, 최대 벽온도는 700K로 예측되었다. 본 연구에서 제시한 냉각 방법은 용량이 부족한 것으로 판단되는 바 막냉각이 추가적으로 적용되어야 할 것으로 판단된다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제25회 추계학술대회논문집
• /
• pp.479-483
• /
• 2005

BBU(Base Bleed Unit)는 155mm 탄에 부착되어 비행 중에 형성되는 탄저부 항력(Base drag)을 감소시켜 사거리를 연장시키는 무기 체계로 국내에서는 2000년 이후 양산화 되었다. 본 연구는 항력감소제용 저연소속도 추진제의 원료 조성 변화를 통한 공정 Lead time 단축으로 생산성을 향상시키는데 목적이 있으며 개발 과정은 추진제 및 연소방지제의 조성시험을 통한 기본적인 특성 확인을 거친 후 Spin Test 와 실제 발사시험을 통해서 최종 성능을 확인하는 순서로 진행하였다.

• 한국전산구조공학회논문집
• /
• 제16권3호
• /
• pp.301-309
• /
• 2003

제어기 포화를 고려한 비선형 제어 알고리듬은 폭넓게 연구되었으나 비선형성과 확률밀도함수(PDF)의 해석해가 존재하지 않기 때문에 알고리듬의 확률적 연구가 미진하여 왔다. 본 연구에서는, 제어기포화를 고려한 비선형 제어 알고리듬의 확률적 해석 방법이 등가 비선형 시스템 방법에 기초하여 제안되었다. 가우시안 백색잡음과 Kanai-Tagimi 필터통과 백색잡음에 의한 구조물 응답에 대하여 제안된 PDF 근사식을 이용하여 얻어진 결과를 통계적으로 얻어진 구조물 응답 PDF와 비교하여 정확성을 검증하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.223-226
• /
• 2003

We propose an improvement method for a $\underline{G}ate$ $\underline{OX}ide(GOX)$ thinning at the edge of $\underline{S}hallow$ $\underline{T}rench$ $\underline{I}solation(STI)$, when STI is adopted to Dual Gate Oxide(DGOX) Process. In the case of SOC(System On-a-Chip), the DGOX process is usually used for realizing both a low and a high voltage parts in one chip. However, it is found that the severe GOX thinning occurs from at STI top edge region and a dent profile exists at the top edge of STI, when conventional DGOX and STI process carried out in high density device chip. In order to overcome this problem, a new DGOX process is tried in this study. And we are able to prevent the GOX thinning by H2 anneal, partially SiN liner skip, and a method which is merged a thick sidewall oxide(S/O) with a SiN pull-back process. Therefore, a good subthreshold characteristics without a double hump is obtained by the prevention of a GOX thinning and a deep dent profile.

• 무역상무연구
• /
• 제66권
• /
• pp.263-284
• /
• 2015

This study has analyzed the efficiency of 10 leading global shipping companies listed in the New York Stock Exchange from2010 to 2014 in order to find the changes of the productivity of shipping industry. The paper observed the Malmquist Productivity Index by using Efficiency and Productivity Analysis System Version 1.0. The data used in this study is the Guggenheim Shipping ETF mainly including the companies of shipping, management, and shipbuilding areas. The results from this statistical analysis indicate that the 10 selected companies have experienced a severely negative growth in 2010. Nevertheless, these companies have accomplished a significant growth of productivity. In particular, the energy transport companies operating Tanker and LNG ships carried out remarkable growth. The reason why the productivity of liner shipping companies did not show the improvement of productivity for five years was attributed to the fact that the P3(Project 3) or M2(Maersk-MSC) including Maersk, MSC, and CMA-CGM were excluded in this research because of the difficulty of attaining reliable source data. The method of this study could be extended to Korean shipping corporations and other global airlines to investigate a changes of certain industries.

• Journal of the korean society of oceanography
• /
• 제38권4호
• /
• pp.166-172
• /
• 2003

Multi­Sensor Core Logger (MSCL) is a useful system for logging the physical properties (compressional wave velocity, wet bulk density, fractional porosity, magnetic susceptibility and/or natural gamma radiation) of marine sediments through scanning of whole cores in a nondestructive fashion. But MSCL has a number of problems that can lead to spurious results depending on the various factors such as core slumping, gas expansion, mechanical stretching, and the thickness variation of core liner and sediment. For the verification of MSCL data, compressional wave velocity, wet bulk density, and porosity were measured on discrete samples by Hamilton Frame and Gravimetric method, respectively. Acoustic impedance was also calculated. Physical property data (velocity, wet bulk density, and impedance) logged by MSCL were slightly larger than those of discrete sample, and porosity is reverse. Average difference between MSCL and discrete sample at both sites is relatively small such as 22­24 m/s in velocity, $0.02­-0.08\;g/\textrm{cm}^3$ in wet bulk density, and 2.5­2.7% in porosity. The values also show systematic variation with sediment depth. A variety of factors are probably responsible for the differences including instrument error, various measurement method, sediment disturbance, and accuracy of calibration. Therefore, MSCL can be effectively used to collect physical property data with high resolution and quality, if the calibration is accurately completed.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.441-444
• /
• 2006

A lot of water is using in the paper mill for dilution, washing, sealing, and other process operation. As the regulation of water environment has been more tightened than ever before, water management in the paper mill becomes the most important task. Topics on reducing fresh water and increasing recycling water have been studied. Further, an interest in zero-effluent system has been increased. The pH of waste water in paper mill is usually weak acidic or neutral. The waste water in the paper mill includes water insoluble organic materials that are not easy to be dissolved in the water, inorganic materials that never react with water and chemical additives that are used to recycled fiber. This study investigated on the effect of various materials used in paper mill on COD. This data could be used to control the environmental load in paper mill. COD caused by raw materials and NBDCOD (Non Bio Degradable COD) after the activated sludge process are investigated in this study. Results obtained in this study can be used in a simulation program designed to control environmental load in the paper mill.

• 한국지반공학회논문집
• /
• 제20권2호
• /
• pp.75-85
• /
• 2004

폐기물 매립장의 침출수를 차수하기 위한 목적으로 다양한 토목섬유들이 폭 넓게 사용되어지고 있다. 이런 토목섬유 사이의 접촉 전단강도는 매립장 바닥차수 시스템 및 종료 매립장 커버 시스템 설계 시 구조물의 안전에 중요한 영향을 주는 설계정수임이 틀림이 없다. 본 연구에서는 폐기물 매립장 설계 시 중요한 설계정수인 토목섬유(지오멤브레인과 지오텍스타일 또는 토목섬유 점토 차수재) 사이의 접촉 전단강도를 산정하기 위하여 대형 직접전단 시험을 수행하였다. 특히, 대부분의 토목섬유가 강우, 침출수 및 지하수에 쉽게 영향을 받기 때문에 토목섬유의 접촉 전단강도에 대한 함수비의 영향을 고려한 연구를 수행하였다.

• 대한조선학회지
• /
• 제24권4호
• /
• pp.9-18
• /
• 1987

The hydrodynamic radiation forces acting on a ship travelling in waves have been conventionally treated by strip theories or by direct three dimensional approaches, most of which have been formulated in frequency domain. If the forward speed of a ship varies with time, or if its path is not a straight line, conventional frequency domain analysis can no more be used, and for these cases time domain analysis may be used. In this paper, formulations are made in time domain with applications to some problems the results of which are known in frequency domain. And the results of both domains are compared to show the characteristics and validity of time domain solutions. The radiation forces acting on a three dimensional body within the framework of a linear theory. If the linearity of entire system is assumed, radiation forces due to arbitrary ship motions can be expressed by the convolution integral of the arbitrary motion velocity and the so called impulse response function. Numerical calculations are done for some bodies of simple shapes and Series-60[$C_B=0.7$] ship model. For all cases, integral equation techniques with transient Green's function are used, and velocity or acceleration potentials are obtained as the solution of the integral equations. In liner systems, time domain solutions are related with frequency domain solutions by Fourier transform. Therefore time domain solutions are Fourier transformed by suitable relations and the results are compared with various frequency domain solutions, which show good agreements.