• The Journal of Advanced Prosthodontics
• /
• v.5 no.3
• /
• pp.270-277
• /
• 2013

PURPOSE. This study was aimed to determine the effect of two chemically distinct denture cleansers and water on the surface hardness of acrylic and silicone based soft denture liners at various time intervals. MATERIALS AND METHODS. Two commonly used commercial resilient liner material were selected based on their chemical composition (silicone- and acrylic-based soft liners) for this investigation. 120 cylindrical specimens were made of $15mm{\times}10mm$ dimensions (according to ASTM: D-2240-64T) in a custom made metal mold. All specimens were stored in artificial saliva throughout the study. Forty specimens were cleansed daily in 0.5% sodium hypochlorite solution; forty were cleansed in sodium perborate and remaining forty specimens were daily rinsed in water. Testing was done at 1 week, 1 month, 3 months and 6 months for surface hardness using a Shore A Durometer. A mean of 3 reading for each sample was subjected to one-way ANOVA, Post Hoc test and pair-t test for statistical analysis. P values of less than 0.05 were taken as statistically significant. RESULTS. Surface hardness of all the samples was significantly higher after a period of 6 months irrespective of the cleansing treatment. Minor changes were observed between control, sodium hypochlorite and sodium perborate groups with time. Greater change was observed in surface hardness of acrylic-based soft denture liners as compared to silicone-based soft liners for all groups, as time progressed. CONCLUSION. Silicone-based soft denture liners performed significantly better in all cleansing treatments than acrylic-based soft denture liners.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.445-448
• /
• 2008

The unsaturated polyester(UP) and epoxy resin have a superior material properties and a chemical resistance using sewerage pipes rehabilitation. However, UP and epoxy have not a low temperatures harding, the requirement $8{\sim}11$ hours long times harding and heating system used by reinforcement liner. This study is to evaluate the effects of low temperature harding properties methyl methacrylate(MMA) monomer using expanded polystyrene(EPS) and UP in addition of initiator and promoters. From the test result, viscosity tends to increase with increasing EPS and UP contents. However, harding time change of the MMA resins which it follows in addition of the initiator and promoter.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.2
• /
• pp.165-171
• /
• 2005

The ultrasonic piezo motor is a new type motor that has an excellent performance and many useful features that electromagnetic motors do not have. But, it suffers from severe system non-linearities and parameter variations especially during speed control. Therefore, it is difficult to accomplish satisfactory control performance by using the conventional PID controller. In this paper, to achieve the precise control for linear type ultrasonic motor was analyzed as a function of response time and change with a driving time. Also, we propose controller that combines STEP controller and PD controller that have error of ${\mu}m$ about liner type ultrasonic motor.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.929-932
• /
• 2008

The unsaturated polyester(UP) and epoxy resin have a superior material properties and a chemical resistance using sewerage pipes rehabilitation. However, UP and epoxy have not a low temperatures harding, the requirement $8{\sim}11$ hours long times harding and heating system used by reinforcement liner. This study is to evaluate the effects of low temperature harding properties methyl methacrylate(MMA) monomer using expanded polystyrene(EPS) in addition of initiator and promoters. From the test result, viscosity tends to increase with increasing EPS contents. However, harding time change of the MMA resins which it follows in addition of the initiator and promoter.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.10a
• /
• pp.203-212
• /
• 2006

The purpose of this research is to suggest the activation plan of Busan port. In the past years, Busan port enjoyed the golden days because of the China's rapid economic growth. But China's continuous development of ports, the trend of increasing container ship size and increasing direct call to China are coming threats to Busan port. So Korea needs to revise the 'Northeast Logistics Hub' strategy because it is considered that Korea ports continuously will handle China's transshipment cargoes. But now China's transshipment cargo share has decreased by direct call to China ports. It means that China has a lot of its local cargoes, so many ship companies change liner service route to handle China cargoes except Bussan ports although Busan port is included in the main trunk route. In the future, Bussan port will not be able to compete again about throughput with China ports if Busan port's transshipment cargo share decreases. So we must find out and develop Busan port's strength which is the competitive edge. By good luck, Busan port has a few opportunities such as the developed feeder network service and geographical advantages. Busan port has many feeder network service like spider's web in any northeast countries so we can suggest that if Japanese shippers use Busan port to distribute their cargoes to Japanese local areas, its transport costs are cheaper than when they use Japan's main ports. In this paper analyzed side of cost when they use Bussan port like hub to distribute their cargo to their local areas. Because most companies tried to reduce the total cost about logistics. Finally, this paper suggests when northeast shippers(China, Japan) use Bussan port which is more economical than their local main ports.

• Journal of Korea Port Economic Association
• /
• v.30 no.1
• /
• pp.143-157
• /
• 2014

Most metropolitan shippers (MS) have used trans pacific route (TPR) or Asia-Europe route (AEP) through Busan port (BP). If Incheon new port (INP) sets up the deep water-depths under -16m, however, there might be a change in MS's port choice behavior (PCB). In this respect, the aim of this paper is to estimate an INP's allotment rate for metropolitan cargo using Logit Model (LM) considering changing global shipping and port environment. This paper reviews previous studies related to shippers' PCB then sets up the utility function (UF) including the dummied dependent variable which is comprised of BP and INP, and some independent variables such as the frequency of liner shipping route (TPR), inland transportation fare, and the rate of container terminal service. As a result of LM analysis, BP has 0.6618 and INP has 0,3382.

• Journal of Korea Port Economic Association
• /
• v.24 no.4
• /
• pp.71-96
• /
• 2008

The purpose of this study is to suggest the new strategies for West coast ports, especially Mokpo Port development. This paper also analyzes the recently evolving change of shipping environment such as upsizing of vessels, horizontal and vertical integration strategies in the liner shipping industries through the mergers and acquisitions or strategic alliances, establishment of dedicated terminal and surging bunker charge. With shipping environment is rapidly changing, we examine how to cope with the current situation and suggest the solutions how to tackle shippers' and shipping companies' request. As a result of an empirical study, we found out that Mokpo Port suffers from the shortage of container cargo, container imbalance, insufficient forwarders and inland trucking service providers and hinterland transportation network system. With these obstacles settled, the number of container cargo can be induced to Mokpo Port and the regular container services between Mokpo and Chinese ports and Japanese ports loops were found to be competitive.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.3 no.2
• /
• pp.87-96
• /
• 1999

To analyze the dynamic behavior of structure, direct integration and mode superposition may be utilized in time domain analysis. As finite number of frequencies can give relatively exact solutions, mode superposition is preferable in analyzing structural behavior. In non-linear analysis, however, mode superposition is seldom used since time-varying element stiffness changes stiffness matrix, and the change of stiffness matrix leads to the change of essential constants - natural frequencies and mode shapes. In spite of these difficulties, there are some attempts to adopt mode superposition because of low cost compared to direct integration, but the result is not satisfactory. In this paper, a method using mode superposition in non-linear analysis is presented by separating local element stiffness from global stiffness matrix with the difference between linear and non-linear restoring forces to the external force vectors included. Moreover, the hysteresis model changing with the relative deformation in each floor makes it possible to analyze non-linear behavior of structure. The proposed algorithm is applied to shear beam model and the maximum displacement is compared with the result using direct integration method.

• Journal of Korea Port Economic Association
• /
• v.38 no.3
• /
• pp.105-131
• /
• 2022

Even after the improvement in 2019, UNCTAD's Liner Shipping Connectivity Index (LSCI), which evaluates the performance of the global container port market, has limited use. In particular, since the liner shipping connectivity index evaluates the performance based only on the distance of the relationship, the performance index combining the port attractiveness of calling would be more efficient. This study used the modified Huff model, the hub-authority algorithm and the eigenvector centrality of social network analysis, and correlation analysis for 2007, 2017, and 2019 data of Ocean-Commerce, Japan. The findings are as follows: Firstly, the port attractiveness of calling and the overall performance of the port did not always match. However, according to the analysis of the attractiveness of a port calling, Busan remained within the top 10. Still, the attractiveness among other Korean ports improved slowly from the low level during the study period. Secondly, Global container ports are generally specialized for long-term specialized inbound and outbound ports by the route and grow while maintaining professionalism throughout the entire period. The Korean ports continue to change roles from analysis period to period. Lastly, the volume of cargo by period and the extended port connectivity index (EPCI) presented in this study showed a correlation from 0.77 to 0.85. Even though the Atlantic data is excluded from the analysis and the ship's operable capacity is used instead of the port throughput volume, it shows a high correlation. The study result would help evaluate and analyze global ports. According to the study, Korean ports need a long-term strategy to improve performance while maintaining professionalism. In order to maintain and develop the port's desirable role, it is necessary to utilize cooperation and partnerships with the complimentary port and attract shipping companies' services calling to the complementary port. Although this study carried out a complex analysis using a lot of data and methodologies for an extended period, it is necessary to conduct a study covering ports around the world, a long-term panel analysis, and a scientific parameter estimation study of the attractiveness analysis.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.8
• /
• pp.639-648
• /
• 2013

This paper describes on the NOx/CO emission characteristics, temperature characteristics and flame structures when firing coal derived synthetic gas especially for gases of Buggenum and Taean IGCC. These combustion characteristics were observed by conducting ambient-pressure elevated-temperature combustion tests in GE7EA model combustor when varying heat input and nitrogen dilution ratio. Nitrogen addition caused decrement in adiabatic flame temperature, thus resulting in the NOx reduction. At low heat input condition, nitrogen dilution raised the CO emission dramatically due to incomplete combustion. These NOx reduction and CO arising phenomena were observed at certain flame temperature of $1500^{\circ}C$ and $1250^{\circ}C$, respectively. As increasing nitrogen dilution, adiabatic flame temperature and combustor liner temperature were decreased and singular points were detected due to change in flame structure such as flame lifting. From the results, the effect of nitrogen dilution on the NOx/CO and flame structure was examined, and the test data will be utilized as a reference to achieve optimal operating condition of the Taean IGCC demonstration plant.