• 유기물자원화
• /
• 제19권4호
• /
• pp.60-65
• /
• 2011

실록산은 유기규소화합물로서 혐기성소화조에서 생산되는 바이오가스로 휘발되며, 이러한 실록산은 바이오가스로 이용되는 가스 연소 엔진 고장의 원인이 된다. 따라서, 바이오가스 내의 실록산을 저감시킬 수 있는 방안이 필요하며 우선적으로 실록산의 발생특성에 대한 조사가 필요하다. 이에 본 연구는 음식물류폐기물폐수의 혐기성소화조에서 발생되는 바이오가스에 함유되어 있는 실록산의 농도 특성을 조사하였다. 총 실록산의 농도는 평균적으로 $9.5mg\;siloxane/m^3$로 나타났으며, 고리 구조 D4의 실록산 농도는 $4.0mg\;siloxane/m^3$로 가장 높게 나타났다. 고리구조 및 선형구조 실록산의 농도는 각각 D4>D5>D6 및 L4>L3>L5>L2의 순서로 나타났다. 1월 2월 및 3월의 실록산 농도 측정 결과에서 1월의 총 실록산 농도가 가장 낮게 나타났으며, 3월의 총 실록산 농도가 가장 높게 나타났다.

• 한국분말재료학회지
• /
• 제30권4호
• /
• pp.346-355
• /
• 2023

Epoxy-based composites find extensive application in electronic packaging due to their excellent processability and insulation properties. However, conventional epoxy-based polymers exhibit limitations in terms of thermal properties and insulation performance. In this study, we develop epoxy-based siloxane/silica composites that enhance the thermal, mechanical, and insulating properties of epoxy resins. This is achieved by employing a sol-gel-synthesized siloxane hybrid and spherical fused silica particles. Herein, we fabricate two types of epoxy-based siloxane/silica composites with different siloxane molecular structures (branched and linear siloxane networks) and investigate the changes in their properties for different compositions (with or without silica particles) and siloxane structures. The presence of a branched siloxane structure results in hardness and low insulating properties, while a linear siloxane structure yields softness and highly insulating properties. Both types of epoxy-based siloxane/silica composites exhibit high thermal stability and low thermal expansion. These properties are considerably improved by incorporating silica particles. We expect that our developed epoxy-based composites to hold significant potential as advanced electronic packaging materials, offering high-performance and robustness.

• 폴리머
• /
• 제33권6호
• /
• pp.569-574
• /
• 2009

수분산 PUD 필름의 내스크래치 특성을 개선하기 위해서 카보네이트(PCD), 에스터(PCL), 실옥산(PDSBP)형의 폴리올을 혼성하여 유-무기 하이브리드 수분산 폴리우레탄(PUD)을 합성하였다. 선형구조(Linear type)의 PUD보다 그래프트형(graft type)의 PUD가 유화입경이 커지는 경향이며, 이는 소수성의 실옥산 그래프트 구조에 기인된다고 생각된다. 합성 PUD의 열적성질은 linear type의 PUD는 PCD의 함량이 증가할수록 유리전이온도($T_g$)는 증가하였으며, 열분해온도는 감소하였다. 반면에, graft type PUD는 PDSBP의 양이 증가할수록 $T_g$는 감소하였고, 열분해온도는 거의 유사하였다. Graft type PUD는 PDSBP의 함량이 증가할수록 내스크래치 특성 및 hardness는 향상되는 경향을 보였다. 9 wt%의 PDSBP 폴리올이 혼성된 경우, 3.3 N의 내스크래치 특성과 9 H 이상의 연필경도를 가지는 우수한 PUD 필름을 얻을 수 있었다.

• 공업화학
• /
• 제7권3호
• /
• pp.490-495
• /
• 1996

Organocyclosiloxane oligomer[$(R_2SiO)_n$, n=2, 3, 4, 5]와 dimethyldichlorosilane을 Pyridine N-oxide 촉매 존재하에서 개환 반응시켜 linear chlorine terminated siloxane(yields;71.2~86.5%)를 얻었다. $0^{\circ}C$에서 linear chlorine terminated siloxane과 dimethylamine을 반응시켜 amino terminated siloxane oligomer(yields;76.2~85.3%)를 얻은 후 이 화합물들과 1,4-bis(dimethylhydroxysilyl)benzene을 반응시켜 공중합체들(yields;58.0~71.0%)을 합성하였다. 이들 공중합체의 구조는 FT-IR 및 $^1H$-NMR로 확인하였으며, DSC 및 TGA thermogram을 통하여 이들 중합체들의 열적특성을 조사하였다. TGA thermogram으로부터 polymer I (n=2)의 초기분해온도는 $476^{\circ}C$로 가장 낮았고, polymer IV(n=5)가 $485^{\circ}C$로 가장 높았다. n의 수가 증가할수록 열안정성은 다소 우수한 것으로 관찰되었고, DSC thermogram에서 중합체들의 유리전이온도는 polymr IV (n=5)가 $-76^{\circ}C$로 가장 낮았으며, n의 수가 감소할수록 높게 나타났음을 알 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제23권12호
• /
• pp.1839-1841
• /
• 2002

• 한국치위생학회지
• /
• 제1권2호
• /
• pp.171-180
• /
• 2001

The purpose of this study was to compared with the properties of commercial polyvinyl siloxane impression materials on the Korean product and the other country one. The materials used in this study were 5 hydrophilic polvinyly siloxane impression materials of light body automixing type (Perfect-F, Handae Chemical, Korea; Examix, GC, Japan; Contrast, VOCO, Germany; Express, 3M, U.S.A; Extrude, Kerr, U.S.A.). Specimens of each impression material were fabricated from a mold with dimensions identical to that specified in ASTM D624-91 and were subjected to tensile lode at 500 mm/min until failure for tear strength. Properties of consistency, strain in compression, recovery from deformation, detail reproduction and linear dimensional change were tested according to the testing methods of the ISO specification no.4823(1992). From this study, the follow ing results were obtained 1. The tear strength values were high ET(3.4kN/m), EP(3.4kN/m), PF(3.0kN/m), CT(3.0kN/m), but the lowest was EM(2.2kN/m)(p<0.05). 2. In the consistency, CT(47 mm) had the highest value, followed by PF(42.1 mm), ET(41.2 mm), and EM(39.6 mm), EP(39.2 mm)(p<0.05). It means more flow that the consistency value is high. 3. The strain in compression values were high followed by EM(5.8%), PF(52%), CT(4.6%), ET(4.1%), EP(2.9%)(p<0.05). 4. In the recovery from deformation, ET(99.95%) and PF(99.90%) had the highest value, followed by EP(99.75%), EM(99.74%) without statistical signification, CT(99.64%) had the lowest value(p<0.05). 5. Detail reproduction reappeared to line $20{\mu}m$ all products. 6. The linear dimensional change was a little shrinked all products. and there were not statistical signification (p>0.05). All products were satisfied the ISO specification.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.475-478
• /
• 1999

The thermal properties of epoxy resin/siloxane for the electrical insulation were investigated by using dynamic DSC run method. As the heating rate increased, the peak temperature on dynamic DSC curve increased. From the linear relation on the Kissinger plot the curing reaction activation energy and pre-exponential factor could be obtained. The curing activation energy from the straight line of the Kissinger plot was 46.72 kJ/mol.

• Bulletin of the Korean Chemical Society
• /
• 제27권4호
• /
• pp.519-523
• /
• 2006

Poly(dimethyl siloxane) (PDMS) has been employed as a microchip material for DNA separation in microfluidic condition. Different sieving molecules such as cellulose derivatives having glucose building block (methyl cellulose (MC), hydroxyethyl cellulose (HEC), and hydroxypropyl methyl cellulose (HPMC)) and polyethylene oxide (PEO) having linear (ring-opened ethylene oxide) unit were used and their performance was compared in terms of separation efficiency and resolution. In general, PEO showed better separation performance than cellulose derivatives probably due to the nature of linear shape polymer conformation. It was possible to perform at least 15 consecutive running with 1.2% PEO at the electric field strength around 200 V/cm. Fast analysis of the standard $\Phi$X 174 RF DNA/Hae III (less than 130s) was obtained with the number of the theoretical plate around 250,000/m. Our PMDS microchip was applied to the measurement of CAG repeat number, which is related to male infertile disease.

• 폴리머
• /
• 제37권2호
• /
• pp.167-176
• /
• 2013

디올 성분으로 폴리(테트라메틸렌 글리콜)(PTMG)과 함께 말단에 히드록시에틸기를 갖는 폴리디메틸실록산(PDMS-OH)을 혼합하여 사용하면서, 이소시아네이트 화합물로 이소포론 디이소시아네이트를, 수분산성을 부여하기 위해 디메틸올 프로피온산을, 가교제로 트리메틸올프로판을, 사슬연장제로 부탄디올을 사용하여 실록산 성분을 포함하는 선형 및 가교형 수분산성 폴리우레탄(WPU-Si)을 합성하였다. PTMG와 PDMS-OH 혼합 비율을 달리하여 합성한 선형 및 가교형 WPU-Si 에멀젼의 안정성을 분석하였고, 이들을 필름으로 제조하여 표면 특성과 $T_g$, 인장 강신도 변화를 분석하였다. PDMS 함량이 많아질수록 시료의 소수성이 증가하고 $T_g$가 높아졌으며, 파단 인장강도는 증가하고 파단 신장률은 감소하였다.

• The Journal of Advanced Prosthodontics
• /
• 제13권5호
• /
• pp.316-326
• /
• 2021

PURPOSE. Purpose of this in vitro study was to determine the accuracy of different intraoral scans versus laboratory scans of impressions and casts for the digitization of an edentulous maxilla. MATERIALS AND METHODS. A PEEK model of an edentulous maxilla, featuring four hemispheres on the alveolar ridges in region 13, 17, 23 and 27, was industrially digitized to obtain a reference dataset (REF). Intraoral scans using Cerec Primescan AC (PRI) and Cerec AC Omnicam (OMN), as well as conventional impressions (scannable polyvinyl siloxane) were carried out (n = 25). Conventional impressions (E5I) and referring plaster casts were scanned with the inEOS X5 (E5M). All datasets were exported in STL and analyzed (Geomagic Qualify). Linear and angular differences were evaluated by virtually constructed measurement points in the centers of the hemispheres (P13, P17, P23, P27) and lines between the points (P17-P13, P17-P23, P17-P27). Kolmogorov-Smirnov test and Shapiro-Wilk test were performed to test for normal distribution, Kruskal-Wallis-H test, and Mann-Whitney-U test to detect significant differences in trueness, followed by 2-sample Kolmogorov-Smirnov test to detect significant differences in precision (P < .008). RESULTS. Group PRI showed the highest trueness in linear and angular parameters (P < .001), while group E5I showed the highest precision (P < .001). CONCLUSION. Intraoral scan data obtained using Primescan showed the highest trueness while the indirect digitization of impressions showed the highest precision. To enhance the workflow, indirect digitization of the impression itself appears to be a reasonable technique, as it combines fast access to the digital workflow with the possibility of functional impression of mucosal areas.