• Proceedings of the KIEE Conference
• /
• 2002.11d
• /
• pp.30-32
• /
• 2002

선형동기전동기는 고추력, 고정밀 운전을 요하는 시스템에 많이 사용되고 있는데, 추력 증가에 따른 추력 리플의 증가는 고정밀 위치제어에 어려움을 주기도 한다. 철심형 선형동기전동기에서는 자석 배열과 철심 치형상의 상호 관계에 의해 발생하는 디텐트력의 영향이 매우 크므로 이를 저감하기 위한 철심 구조의 설계가 필요하다. 본 논문에서는 실제 제작성을 고려하여 치와 철심부의 챔퍼링, 길이 변경, 자석 배열의 스큐 적용 등을 통해 선형동기전동기의 디텐트력을 저감하기위한 설계법을 제시하고 그 효과를 시험기의 제작 및 실험을 통해 증명하였다.

• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.72-74
• /
• 2001

This paper deals with a dynamic analysis and a position control for air-core type linear synchronous motor with Halbach array (HA) permanent magnet mover. The primary coils are designed to be air-cored, so the HA-PMLSM don't exist the detent force. The secondary HA array of PMs does not require any ferro-magnetic yoke and excites stronger magnetic flux density and closer to the sinusoids than a conventional PM array.

• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.93-95
• /
• 2001

This paper describes detent force minimization techniques of Permanment Magnet Linear Synchronous Motor(PMLSM) for the improvement of control and the driver system to control the position and velocity, PMLSM are simulated by operating open-loop system and PI control system, and in actuality the control system is implemented by DSP based controller and PWM inverter to investigate the characteristics of both open-loop system and PI control system.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.707-708
• /
• 2006

This paper provides the design of propulsion system for the catenary-pantograph run tester. Permanent magnet linear synchronous motor design suitable for an high-speed ground transportation system which need a big acceleration force. The propulsion system of the catenary-pantograph run tester need high speed and big acceleration.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.6
• /
• pp.65-70
• /
• 2007

This paper presents the characteristics analysis and experiment of the electromagnetic pump using linear induction motor(LIM Pump) which can transfer the molten metals by the electromagnetic force. The characteristics of LIM Pump are analysed solving the magneto-hydro-dynamic(MHD) equation at various magnetic flux. The molten zinc is used in the experiment and the results we compared with the analysis.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.760-762
• /
• 2000

Hybrid type LPM can be widely applied in the precise position controlled devic because precise linear motion can be directly obtained by the simple control circuit without backlash in the rotary-type stepping motor. Also, LPM can increase the Position resolution, which was limited by mechanical manufacturing limit and characteristic of magnetic material. using micro-step drive method to decrease the noise and vibration further. Especially, Double-side LPM may be replaced the solenoid as the valve driving device without difficulty and give full play to control the valve accurately. Hence, In this paper, magnetic circuit of double-side LPM was confirmed and static thrust force curve according to the relative displacement between stator and mover, was analyzed by the two dimensional finite element method. From this results, we can suppose the excitation current to be controlled optimally.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.754-756
• /
• 2000

In this paper, the I-PD control algorithm using the coefficient diagram method(CDM) controller design of the Linear DC Motor(LDM) is presented. Recently LDM has been used to obtain the fine results of the dynamic characteristic for straightly moving condition. The I-PD control algorithm has a robust response to force disturbance. The effectiveness of I-PD is shown by simulations and comparison with PID.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2005.05a
• /
• pp.97-102
• /
• 2005

This paper presents feed rate optimizaton of a PMLSM driven feed-slide for mininum vibrations by smoothing velocity curve with finite jerk. First of all, the PMLSM was designed and made to reduce detent force. Next, a PMLSM driven feed-slide system was mathematically modeled as a 4-degree-of-freedom lumped parameter model. The key idea of our vibration minimization method is to find out the most appropriate smooth velocity curve with finite jerk. The validity of our proposed method has been verified by comparing computer simulation results of the feed-slide model with experimental ones.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.5
• /
• pp.453-461
• /
• 1990

In this paper, a short primary-short secondary single-sided linear induction motor which is used as the driving source for an automatic conveyor system, is selected as an analysis model. The finite element method in which the current vector potential is introduced is adopted to analyze the eddy current distribution and thrust force which are produced according to the relative position of the primary and the secondary. Also, the analysis results are compared with experimental ones, to show the propriety of this model.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.54 no.8
• /
• pp.351-357
• /
• 2005

This paper presents vibration minimization of a PMLSM driven feed-slide by using optimized smooth velocity curve with finite jerk. First of all, the PMLSM was designed and made to reduce detent force. Next, a PMLSM driven feed-slide system was mathematically modeled as a 4-degree-of-freedom lumped parameter model. The key idea of our vibration minimization method is to find out the most appropriate smooth velocity(feedrate) curve with finite jerk. The validity of our proposed method has been verified by comparing computer simulation results of the feed-slide model with experimental ones.