• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제24회 춘계학술대회논문집
• /
• pp.248-251
• /
• 2005

본 연구에서는 가스 터빈 엔진의 결함에 의해 나타나는 엔진의 성능 저하를 진단하는 기법을 연구하였다. 대상 엔진을 모델화하기 위해 상용 프로그램 GSP를 이용하여 저하된 성능 진단을 위한 변수들을 추출하였으며 이를 바탕으로 Health Monitoring을 위한 Virtual Sensor Model을 구축하였다. 단일 결함과 복합 결함을 예측하기 위한 방법으로 Multiple Linear Regression기법과 가중치를 이용한 기법을 도입하여 엔진 구성품의 결함 위치 및 결함 정도를 예측하였다.

• 대한기계학회논문집
• /
• 제17권2호
• /
• pp.467-474
• /
• 1993

Viscous flow and heat transfer phenomena in an axisymmetric cylinder which models a diesel engine have been numerically studied. In order to search for a way to minimize numerical diffusion, the effectiveness and the appropriateness of two selected numerical schemes for convective terms in the governing equations have been tested. They are Linear Upwind Difference Scheme and Hybrid Scheme. Using a standard k-.epsilon. turbulence model, the calculation has been carried out basically up to 180.deg. of crank angle. As a result, it was shown from comparison with previous experimental data that Linear Upwind Difference Scheme is less influenced than Hybrid Scheme by the numerical diffusion and it was suggested that these effects of numerical diffusion can be more significant than those due to turbulence modeling.

• 한국항공우주학회지
• /
• 제32권10호
• /
• pp.93-101
• /
• 2004

액체 로켓엔진에서 발생하는 고주파 연소 불안정성을 예측하기 위해 선형 안정한계를 계산하는 방법을 연구하였다. 기존의 선형이론에 근거하여 유도된 선형 안정한계를 나타내는 안정한계 식을 채택하였으며, 그 식을 구성하는 각각의 항을 정량적으로 평가하는 방안들이 제시되었다. 안정한계 계산에 필요한 열-화학 물성치와 유동 변수를 열역학적 평형계산과 CFD 해석 및 실험 결과로부터 평가하는 구체적 절차들을 상세히 제시하였다. 실제 로켓엔진으로서 시험 데이터가 확보되어 있는 KSR-III 로켓엔진에 대해서 제시한 방법을 적용하여 안정한계 곡선을 구하였다. 계산결과는, 해당 엔진에 대해 정량적으로 타당한 안정한계 곡선을 보여주었다. 이를 토대로 해당 엔진의 안정성 특성을 분석하였다. 본 연구에서 제시된 선형 안정한계 계산 방법은 진정한 예측의 1차적 근사로서 활용할 만한 가치가 있으며, 엔진 개발 초기에 근사적으로 안정성 경향을 분석하기에 유용할 것이다.

• 한국자동차공학회논문집
• /
• 제11권2호
• /
• pp.89-95
• /
• 2003

We consider a problem of application of analytical redundancy to engine synchronization process of spark ignition engines, which is critical to timing for every ECU process including ignition and injection. The engine synchronization process we consider here is performed using the pulse signal obtained by the revolution of crankshaft trigger wheel (CTW) coupled to crank shaft. We propose a discrete-time linear model for the signal, for which we construct FDI (Fault Detection & Isolation) system consisting residual generator and threshold based on linear observer.

• 동력기계공학회지
• /
• 제10권4호
• /
• pp.159-164
• /
• 2006

In recent, the marine engine of a large size is being realized a lower speed, longer stroke and a small number of cylinders for the energy saving. Consequently the variation of rotational torque became larger than former days because of the longer delay-time in fuel oil injection process and an increased output per cylinder. It was necessary that algorithms have enough robustness to suppress the variation of the delay-time and the parameter perturbation. This paper shows the structure of hybrid F-NFC against the delay-time and the perturbation of engine parameter as modeling uncertainties, and the design of the robust speed controller by hybrid F-NFC for the engine. And, The Parameter values of linear equation are determined by RC-GA for F-NFS. The hybrid F-NFC is combined the F-NFC and PID controller for filling up each.

• 한국소음진동공학회논문집
• /
• 제23권7호
• /
• pp.654-661
• /
• 2013

The dynamic characteristics of a free-piston stirling engine(FPSE) with regard to the working frequency is investigated from theoretical and experimental studies. The FPSE is modeled as a two degree-of-freedom linear vibration system. A theoretical expression on the working frequency is derived from the instability condition for self-excitation based on the linear vibration model. A ${\gamma}$-type free-piston stirling engine is fabricated for experimental studies, and its working frequency is measured on various heater temperatures. Comparisons between the theoretical and experimental results reveal that the working frequency of the test FPSE depends on both the temperature of the compression space and the temperature difference between the expansion and compression spaces.

• Journal of Mechanical Science and Technology
• /
• 제17권10호
• /
• pp.1563-1571
• /
• 2003

A fast response NO analyzer was applied to investigate the relation between cycle-by-cycle NO emissions and combustion chamber pressure. NO emissions were sampled at an isolated exhaust manifold of 4-stroke spark ignition engine to avoid the interference of exhaust gas from other cylinders. The linear correlation analysis was performed with collected data of NO emissions and combustion chamber pressure with respect to the various air-fuel mixture ratios and engine loads. The sampled data sets were obtained during 200 cycles at each operating condition. The results showed that there was a typical pattern in NO emissions from an exhaust port through a cycle. It was possible to set a block of crank angle in which the linear correlation coefficient between NO emissions and combustion chamber pressure was high. As the engine load increased, NO emissions were more dependent on combustion chamber pressure after TDC. It was also analyzed that the correlation between two parameters with respect to air-fuel mixture ratio tended to increase as mixture went leaner. Furthermore, this correlation coefficient for the mixture near the lean limit seemed to be kept high even though combustion was unstable.

• Journal of Electrical Engineering and Technology
• /
• 제13권5호
• /
• pp.1901-1907
• /
• 2018

This paper is a study for accurate iron loss calculation of a cylindrical linear machine for free piston engine. This study presents that it is possible to accurately predict power loss in ferromagnetic laminations under magnetic flux by specially considering the dependence of hysteresis, classical, and excess loss components on the magnetic induction derivative. Significant iron loss in the armature core will not only compromise the machine efficiency, but may also result in excessive heating, which could lead to irreversible deterioration in the machine performance. Thus, correct prediction of power losses under a distorted flux waveform is therefore an important prerequisite to machine design, particularly when dealing with large apparatus where stringent efficiency standards are required. Finally, it will be discussed about the iron loss in various materials of cylindrical linear electric machine by geometric and electrical parameters. It will give elaborate information about the perfect design and design rules of cylindrical linear machine and in parallel tools for the calculation, simulation and design will be available.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제29회 추계학술대회논문집
• /
• pp.345-349
• /
• 2007

본 연구에서는 계측 데이터의 성능 추이를 분석하여 엔진의 기계적 결함 여부를 탐지하기 위한 퍼지 경향감시 방법을 제안하였다. 경향감시 방법은 연료유량, 배기가스 온도, 로터회전수, 진동수와 같은 중요 엔진 파라미터를 모니터링하여 시간에 따른 변화를 분석하여 엔진 상태를 진단하는 것이다. 선형회귀분석을 통해 엔진 상태 변화를 수식화하고 퍼지 로직을 통해 진단 결과를 분석하여 예측되는 손상 원인을 제시한다.

• 한국항공우주학회지
• /
• 제30권1호
• /
• pp.105-113
• /
• 2002

본 연구에서는 터보프롭 엔진의 정상상태 성능해석 프로그램을 개발하고 비 장창 및 장착조건에서 성능이 해석되었다. 개발프로그램의 검증을 위해 GASTURB 8.0프로그램의 해석결과와 엔진 제작사의 주어진 성능자료를 비교하였다. 개발 프로그램은 GASTURB 8.0과의 비교 결과 5%내의 오차를 나타내어 프로그램의 신뢰성을 확인할 수 있었다. 성능진단을 위해 선형 및 비선형 GPA프로그램을 개발하였으며, 최적계측변수의 선정을 위한 연구를 수행하였다. 계측변수의 종류의 수가 진단의 정확성에 미치는 영향을 알아보기 위하여 선형 및 비선형 GPA프로그램은 다양한 변수를 이용하여 해석 되었다. 그 결고 적절하게 선택된 계측변수는 보다 적은 계측장비로도 신뢰성있고 경제적인 손상 탐지가 가능함을 확인하였다.