• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.1
• /
• pp.14-19
• /
• 2000

In order to develop an appropriate cultural practice for a newly bred 2-rowed, waxy, naked barley cultivar 'Duwonchapssalbori' in the southern region, 2 varieties, 3 seeding dates, 4 seeding rates were designed with 2 replications. The heading and maturity dates of 'Duwonchapssalbori' were' earlier than 'Saessalbori by 2-5 and 4 days, respectively. Culm length of 'Duwonchapssalbori' was 60 to 66cm with lodging resistance. Grain yields of both varieties were 4.28-4.33 ton/ha in the plot of Oct. 20 seeding, 4.11-4.18 ton in the plot of Oct. 28 seeding, and 3.7-13.89 ton/ha in the Nov. 5 seeding. Grain yield with different seeding rates highly significantly fitted with secondary polynomial equations in the plots of Oct. 20 and Oct. 28 seedings ($R^2$=0.84-0.85), showing the greatest yield with seeding rate of 140kg per ha. However, the grain yield with various seeding rates in the plot of Nov. 5 seeding showed simple linear regression ($R^2$=0.71), showing the seeding rate over 160kg in the case of later seeding to be optimal. Number of spikes per $m^2$ significantly contributed to grain yield, and fitted to simple linear regression ($R^2$=0.881-0.891), suggesting that plenty of early stands should be established at early seedling stage for high grain yield. Young spikes of 'Duwonchapssalbori' in the plot of Oct. 20 seeding elongated with linear increments since Feb. 10 (6.7mm), and showed rapid increment since March 7 (15.1mm). However, elongation of young spikes of 'Saessalbori' began from March 15 with slow increments. From these studies, the optimum seeding date and seeding rate in 'Duwonchapssalbori' were Oct. 20-28 and 140kg per ha for high grain yield in the southern regions.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.11
• /
• pp.39-49
• /
• 2014

Volcanic rocks in Jeju island show vesicular structure caused by various environmental factors, and indicate the differences in geological and mechanical characteristics from region to region. Previous studies on the volcanic rocks in Jeju island have been actively conducted on geological and chemical properties in terms of geophysics and geology and on physical and mechanical properties in terms of engineering. But comprehensive comparative analysis on physical and mechanical properties of volcanic rocks in Jeju island is not conducted. In this study, the physical and mechanical properties of volcanic rocks in Jeju island were compared and analyzed comprehensively through the existing research papers and reports about volcanic rocks in Jeju island. As a result, it was found that the relationship between absorption (porosity) and apparent specific gravity is commonly linear and could be represented as two different linear approximations. In addition, it was found that the relationship between P-wave velocity and S-wave velocity and the relationship between absorption (porosity) and uniaxial compressive strength could be classified more clearly, considering two different linear relationships in absorption (porosity) and apparent specific gravity.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.19 no.1
• /
• pp.37-43
• /
• 2015

This paper presents a detailed procedure for a nonlinear soil-structure interaction of a seismically isolated NPP(Nuclear Power Plant) structure using the boundary reaction method (BRM). The BRM offers a two-step method as follows: (1) the calculation of boundary reaction forces in the frequency domain on an interface of linear and nonlinear regions, (2) solving the wave radiation problem subjected to the boundary reaction forces in the time domain. For the purpose of calculating the boundary reaction forces at the base of the isolator, the KIESSI-3D program is employed in this study to solve soil-foundation interaction problem subjected to vertically incident seismic waves. Wave radiation analysis is also employed, in which the nonlinear structure and the linear soil region are modeled by finite elements and energy absorbing elements on the outer model boundary using a general purpose nonlinear FE program. In this study, the MIDAS/Civil program is employed for modeling the wave radiation problem. In order to absorb the outgoing elastic waves to the unbounded soil region, spring and viscous-damper elements are used at the outer FE boundary. The BRM technique utilizing KIESSI-3D and MIDAS/Civil programs is verified using a linear soil-structure analysis problem. Finally the method is applied to nonlinear seismic analysis of a base-isolated NPP structure. The results show that BRM can effectively be applied to nonlinear soil-structure interaction problems.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.47 no.1
• /
• pp.41-50
• /
• 2024

Korea is facing a significant problem with historically low fertility rates, which is becoming a major social issue affecting the economy, labor force, and national security. This study analyzes the factors contributing to the regional gap in fertility rates and derives policy implications. The government and local authorities are implementing a range of policies to address the issue of low fertility. To establish an effective strategy, it is essential to identify the primary factors that contribute to regional disparities. This study identifies these factors and explores policy implications through machine learning and explainable artificial intelligence. The study also examines the influence of media and public opinion on childbirth in Korea by incorporating news and online community sentiment, as well as sentiment fear indices, as independent variables. To establish the relationship between regional fertility rates and factors, the study employs four machine learning models: multiple linear regression, XGBoost, Random Forest, and Support Vector Regression. Support Vector Regression, XGBoost, and Random Forest significantly outperform linear regression, highlighting the importance of machine learning models in explaining non-linear relationships with numerous variables. A factor analysis using SHAP is then conducted. The unemployment rate, Regional Gross Domestic Product per Capita, Women's Participation in Economic Activities, Number of Crimes Committed, Average Age of First Marriage, and Private Education Expenses significantly impact regional fertility rates. However, the degree of impact of the factors affecting fertility may vary by region, suggesting the need for policies tailored to the characteristics of each region, not just an overall ranking of factors.

• Journal of Environmental Health Sciences
• /
• v.36 no.6
• /
• pp.465-471
• /
• 2010

This study aims to investigate the relationship between air pollution exposure and the prevalence of allergic rhinitis in a young population in the Ulsan metropolitan region (UMR). Data on physician-diagnosed allergic rhinitis (past 12 months) in 1,449 infants and children aged 1-18 years who lived within 1.5 or 2 km of air quality monitoring sites were collected in a cross-sectional health interview survey conducted between January-February 2006 in the UMR. Comparisons of the spatial distribution of the prevalence rates for allergic rhinitis and annual average pollutant concentrations over the region showed that a relatively high prevalence rate occurred around the coastal industrial area, with high PM10 concentrations. A linear correlation analysis demonstrated a positive correlation relationship between them (R = 0.680, p = 0.04). Multiple linear regression analysis revealed that the combined effect of the PM10 and $SO_2$ variables accounts for approximately 81% of the variance (R-square: 0.81) in the prevalence rate. From the multiple logistic regression analysis after adjustment by age, sex, and air-pollutant factors, the PM10 and $SO_2$ which were mainly from industrialrelated emissions were found to be significantly associated with an increased risk of allergic rhinitis (aOR: 1.76, 95% CI: 1.15-2.70 for PM10 ; aOR: 1.63, 95% CI: 1.12-2.35 for SO2).

• Korean Journal of Veterinary Research
• /
• v.30 no.3
• /
• pp.271-275
• /
• 1990

The tests related to red cell fragility were performed. Samples of blood anticoagulated with heparin were obtained from Korean native cattle in Chonbuk region abattoir, and classified by the district(Kun) with reference to breeding location. Hemolysis test for red cell fragility was performed with whole blood and glutathione peroxidase activity was measured spectrophotometrically. Blood concentration of selenium, inorganic component of glutathione peroxidase, was also determined fluorophotometrically. The results obtained were summerized as follows; 1. Percent hemolysis of erythrocytes ranged from 13.53 to 20.74%, and its mean Palue was low as $17.11{\pm}9.91%$. Means in all were not district(Kun) in Chonbuk region significantly different. 2. Glutathione peroxidase activity ranged from 2,881 to 4,000mU/ml, and high mean values, $3,352{\pm}1,872mU/ml$, reflected low percent hemolysis. 3. There was a highly negative correlation between the red cell fragility(Y) and blood glutathione peroxidase activity(X). The linear regression equation for these data was: Y=29.86-3.75X with a correlation coefficient of r=-.6886 (p<0.01) 4. Blood selenium concentration ranged from 0.16 to $0.24{\mu}g/ml$, and mean values was normal level as $0.2{\pm}0.11{\mu}g/ml$. 5. There was a highly positive correlation between blood selenium concentration(X), and blood glutathione peroxidase activity(Y). The linear regression for these data was: Y=230+15,790X, with a correlation coefficient officient of r=0. 8635.

• Journal of Radiation Protection and Research
• /
• v.41 no.3
• /
• pp.286-290
• /
• 2016

Background: Activation of air and water in the electron linear accelerator for medical use has not been considered severely. By the new Japanese regulation for protection of radiation hazard, it became indispensable to evaluate of activation of air and water in the accelerator room. The measurement of induced activity in air and water components in the electron energy region of 10 to 20 MeV is very difficult, because this energy region is close to the threshold energy region of photonuclear reactions. Then, we measured the photonuclear reaction yields of $^{13}N$, $^{15}O$, and $^{11}C$ by using the electron linear accelerator. Obtained data were compared with the data calculated by the Monte Carlo method. Materials and Methods: An activation experiment was performed at the Research Center for Electron Photon Science, Tohoku University. Highly purified $SiO_2$, $Si_3N_4$, and carbon disks were irradiated for 10 minutes by bremsstrahlung converted by a tungsten plate. Induced activity from C, N, and O was obtained. Monte Carlo calculation was performed using MCNP5 and AERY (DCHAIN-SP) to simulate the experimental condition. Cross section data were adopted the KAERI dataset. Results and Discussion: In our experiment in hospital, calculated values were not agreed with experimental values. It might be three possible reasons as the cause of this deference, such as irradiation energy, calculation procedure and cross section data. Obtained data of this work, calculated and experimental values were good agreement with each other within one order. In this work, we used KAERI dataset of photonuclear reaction instead of JENDL. Therefore, it was found that the photonuclear cross section data of light elements are most important for yield calculation in these reactions. Conclusion: Further improvement for calculation using a new dataset JENDL/PD-2015 and considering electron energy spreading will be needed.

• Transactions on Electrical and Electronic Materials
• /
• v.14 no.4
• /
• pp.177-181
• /
• 2013

In this paper, silicon solar cells are analyzed regarding power conversion efficiency by changed capacitance in the depletion region. For the capacitance control in the depletion region of silicon solar cell was applied for 10, 20, 40, 80, 160 and 320 Hz frequency band character and alternating current(AC) voltage with square wave of 0.2~1.4 V. Academically, symmetry formation of positive and negative change of the p-n junction is similar to the physical effect of capacitance. According to the experiment result, because input of square wave with alternating current(AC) voltage could be observed to changed capacitance effect by indirectly method through non-linear power conversion (Voltage-Current) output. In addition, when input alternating current(AC) voltage in the silicon solar cell, changed capacitance of depletion region with the forward bias condition and reverse bias condition gave a direct effect to the charge mobility.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.9
• /
• pp.2994-3001
• /
• 2000

In this paper. a method for color image segmentation using region merging is proposed. A inhomogeneity which exists in image is reduced by smoothing with non-linear filtering. saturation enhancement and intensity averaging in previous step of image segmentation. and a similar regions are segmented by non-uniform quantization using zero-crossing information of color histogram. A edge strength of initial region is measured using high frequency energy of wavelet transform. A candidate region which is merged in next step is selected by doing this process. A similarity measure for region merging is processed using Euclidean distance of R. G. B color channels. A Proposed method can reduce an over-segmentation results by irregular light sources et. al, and we illustrated that the proposed method is reasonable by simulation.

• Earthquakes and Structures
• /
• v.19 no.3
• /
• pp.215-226
• /
• 2020

A self-centering wall (SCW) is a lateral resistant rocking system that incorporates posttensioned (PT) tendons to provide a self-centering capacity along with dampers to dissipate energy. This paper investigates the rocking responses of a SCW with base viscous dampers under a sinusoidal-type pulse considering yielding and fracture behaviour of the PT tendon. The differences in the overturning acceleration caused by different initial forces in the PT tendon are computed by the theoretical method. The exact analytical solution to the linear approximate equation of motion is also provided for slender SCWs. Finally, the effects of the ductile behaviour of PT tendons on the rocking response of a SCW are analysed. The results demonstrate that SCWs exhibit two overturning modes under pulse excitation. The overturning region with Mode 1 in the PT force cases separates the safe region of the wall into two parts: region S1 with an elastic tendon and region S2 with a fractured tendon. The minimum overturning acceleration of a SCW with an elastic-brittle tendon becomes insensitive to excitation frequency as the PT force increases. After the plastic behaviour of the PT tendon is considered, the minimum overturning acceleration of a SCW is increased significantly in the whole range of the studied w_g/p.