• Journal of information and communication convergence engineering
• /
• 제17권4호
• /
• pp.255-260
• /
• 2019

A pendubot is a representative example of an underactuated system that has fewer actuators than the degree of freedom of the system. In this study, the characteristics of the pendubot are first reviewed; each part is then designed using Solidworks by dividing the pendubot into three parts: the base frame, first link frame, and second link frame. These three parts are then imported into the Simulink environment via a STEP file format, which is the standard protocol used in data exchange between CAD applications. A 3D model of the pendubot is then constructed using Simscape, and the usefulness of the 3D model is validated by a comparison with a dynamic equation derived using the Lagrangian formulation. A linearized model around an upright equilibrium position is finally obtained, and a sliding mode controller is designed based on the linear quadratic regulator. Simulation results showed that the designed controller effectively maintained upright balance of the pendubot in the presence of disturbance.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.421-423
• /
• 2007

In this paper, The authors apply a state feedback control using an optimal control theory to improve the stability of the control and the dynamic response of the DC-DC converter system with a number of different loads. To execute a this state feedback control, The authors present the pole placement technique using Linear Quadratic Regulator(LQR) to optimally control the system. An integrator can also be included in the open-loop path in order to minimize the steady-state error of the output voltage. To confirm the superiority of the controller, The simulation results are presented.

• 한국정밀공학회지
• /
• 제21권7호
• /
• pp.107-114
• /
• 2004

This paper presents a two-time scale approach for vibration reduction of a high speed Cartesian manipulator. High speed manipulators would be subject to mechanical vibration due to high inertia forces acting on linkages. To achieve high throughput capability, such motion induced vibration would have to be damped quickly, to reduce settling time of the manipulator end-effector. This paper develops a two-time scale model fer a structurally-flexible Cartesian manipulator. Based on the two-time scale model, a composite controller consisting of a computed torque method for the slow time-scale rigid body subsystem, and a linear quadratic state-feedback regulator for the fast time-scale flexible subsystem, is designed. Simulation results show that the proposed two time-scale controller yields good performance in attenuating structural vibration arising due to excitation from inertial forces.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2006년도 학술발표회 논문집
• /
• pp.511-518
• /
• 2006

In this study, seismic response mitigation effect of an MR damper generating response-dependent frictional force is investigated. It has been reported in previous studies that passively operated MR damper with constant input current doesn't show better control performance than semi-active MR damper with varying input current calculated by control algorithms such as linear quadratic regulator and sliding mode control. However, in order to operate the MR damper semi-actively, other control systems besides the damper itself such as sensors for measuring structural responses and controller for calculating optimal input current are necessary, which deteriorate the economical efficiency. This study presents a MR damper generating frictional force of which magnitude is controlled in accordance to the displacement and velocity transferred to the damper. Numerical analyses results indicate that the performance of the response dependent MR damper is closely related with the range of the friction force and it can be designed to short better control performance than the passive MR damper.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.41.4-41
• /
• 2001

In this paper, we propose a LQR(Linear Quadratic Regulator) controller design for the active suspension using two-degree-of-freedom quarter-car model. We can improve the inherent suspension problem, the tradeoff between ride quality and suspension travel by selecting appropriate weights in the LQR-objective function. Because any definite rules for selecting weights do not exist, we replace the designer´s trial and error with the optimization-algorithm, ES(Evolution Strategy). Using the ES, we can find the proper control gains for selected frequencies, which have major effects on the vibrations of the vehicle´s state variables.

• 한국정보통신학회논문지
• /
• 제12권12호
• /
• pp.2365-2370
• /
• 2008

본 논문에서는 비선형 시스템의 위치 제어를 위하여 웨이블렛 신경회로망 제어기를 구성하였으며, 웨이블렛 신경회로망은 LQR 제어기의 성능을 향상 시킬 목적으로 사용한다. 불안전한 비선형 시스템을 선형화 시키고 안정화된 선형 시스템을 만들기 위하여 LQR를 사용하며, 외란에 효과적으로 적응하기 위하여 웨이블렛 신경회로망 제어기를 사용한다. 이 제어기를 비선형 시스템의 위치 제어에 적용하여 실험을 통해 그 유효성을 검정하였다.

• 한국정보통신학회논문지
• /
• 제26권10호
• /
• pp.1563-1566
• /
• 2022

Video streaming applications such as Netflix and Youtube are widely used in our daily life. A DASH based streaming client exploits adaptive bit rate (ABR) method to choose the most appropriate video source representation that the network can support. In this paper we propose a novel energy-aware ABR scheme that adds the ability to monitor energy efficiency in addition to the linear quadratic regulator algorithm we previously introduced. Our trace-driven simulation studies show that our proposed scheme mitigates and shortens re-buffering, resulting in energy savings of mobile devices while preserving the similar QoE compared to the state-of-the-art ABR algorithms.

• 풍력에너지저널
• /
• 제2권1호
• /
• pp.74-81
• /
• 2011

This paper deals with the application of LQ control to the power curve tracking control of wind turbine. However, two more additional tasks are required to apply the LQR theory to wind turbine control. One is the tracking problem instead of regulation, because the wind turbine is controlled as variable speed and variable pitch. The other is LQ integral control., because the rotor speed should be tightly controlled without any steady state error. Starting from the analysis of wind characteristics, design requirement of a wind turbine control system is defined. A design procedure of LQ tracking with integral control is introduced. The performance of LQ tracking system is analyzed and evaluated by numeric simulation.

• 한국항공우주학회지
• /
• 제30권8호
• /
• pp.71-77
• /
• 2002

본 논문에서는 강성 중앙동체에 끝단 질량을 갖는 두 개의 유연구조물이 부착되어 있는 구조 모델의 선회기동과 진동억제를 동시에 제어하는 문제를 고려하였다. 구조모델의 선형 운동방정식을 구하기 위해 유한요소법을 사용하였다. 우주구조물 모델의 LQR문제에 있어서 물리적 의미를 갖는 성능지수를 제공하는 간단한 방법을 제안하였다. 제안된 성능지수는 일반적으로 사용하는 에너지 형식의 성능지수와 비교할 때 수학적으로는 큰 차이가 없으나 물리적으로는 의미있는 차이를 갖는다. 특수해 방법을 사용하여 부등호 제어 제약조건이 있는 시변 LQR문제를 해결하는 수치적 절차를 소개하였다.

• 로봇학회논문지
• /
• 제17권3호
• /
• pp.308-313
• /
• 2022

This paper proposes a velocity control method for a permanent magnet synchronous motor (PMSM) based on the Koopman operator that does not require model parameter information except for pole-pair of the motor and external load. First, the Koopman operator is derived using observable functions and observation data. Then, the desired q-axis current corresponding to the desired velocity is generated using the relationship between the continuous-time Koopman operator and the dynamics of PMSM. Also, the dynamic equation of PMSM is expressed as a linear form in observable space using the discrete-time Koopman operator. Finally, it is applied to the linear quadratic regulator (LQR) to derive the final form of control input. To verify the proposed method, the conventional cascade PI controller and the LQR controller configured with the existing technique are compared with the proposed method in the viewpoint of q-axis current generation and velocity tracking performance in an environment with noise and external load.