• 제목/요약/키워드: Linear Pushbroom imagery

검색결과 6건 처리시간 0.018초

선형 Pushbroom 영상의 에피폴라 기하모델 수립을 위한 간소화된 방법론 (A Simplified Strategy for the Epipolar Geometry of Linear Pushbroom Imagery)

  • 이해연;박원규
    • 대한원격탐사학회지
    • /
    • 제18권2호
    • /
    • pp.97-105
    • /
    • 2002
  • In this paper, we proposed a simplified strategy for the epipolarity of linear pushbroom imagery. The proposed strategy is verified on "Gupta and Hartly" sensor model and "Orun and Natarajan" sensor model. It is also compared with the precise epipolarity model of each sensor model on SPOT and KOMPSAT imagery. For the quantitative analysis, 20 ground control points are used as independent checking points. Based on the results, the accuracy of the proposed strategy is not different from that of the precise epipolarity model of each sensor model (below 0.1 pixels). Under the worst circumstance, the proposed strategy is robust. We can assure that the proposed strategy will show high accuracy on most of sensor models based on the co-linearity equations.

SATELLITE ORBIT AND ATTITUDE MODELING FOR GEOMETRIC CORRECTION OF LINEAR PUSHBROOM IMAGES

  • Park, Myung-Jin;Kim, Tae-Jung
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
    • /
    • pp.543-547
    • /
    • 2002
  • In this paper, we introduce a more improved camera modeling method for linear pushbroom images than the method proposed by Orun and Natarajan(ON). ON model shows an accuracy of within 1 pixel if more than 10 ground control points(GCPs) are provided. In general, there is high correlation between platform position and attitude parameters but ON model ignores attitude variation in order to overcome such correlation. We propose a new method that obtains an optimal solution set of parameters without ignoring the attitude variation. We first assume that attitude parameters are constant and estimate platform position's. Then we estimate platform attitude parameters using the values of estimated position parameters. As a result, we can set up an accurate camera model for a linear pushbroom satellite scene. In particular, we can apply the camera model to its surrounding scenes because our model provide sufficient information on satellite's position and attitude not only for a single scene but also for a whole imaging segment. We tested on two images: one with a pixel size 6.6m$\times$6.6m acquired from EOC(Electro Optical Camera), and the other with a pixel size 10m$\times$l0m acquired from SPOT. Our camera model procedures were applied to the images and gave satisfying results. We had obtained the root mean square errors of 0.5 pixel and 0.3 pixel with 25 GCPs and 23 GCPs, respectively.

  • PDF

DIRECT EPIPOLAR IMAGE GENERATION FROM IKONOS STEREO IMAGERY BASED ON RPC AND PARALLEL PROJECTION MODEL

  • Oh, Jae-Hong;Kim, Kyung-Ok
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
    • /
    • pp.860-863
    • /
    • 2006
  • Epipolar images have to be generated to stereo display aerial images or satellite images. Pushbroom sensor is used to acquire high resolution satellite images. These satellite images have curvilinear epipolar lines unlike the epipolar lines of frame images, which are straight lines. The aforementioned fact makes it difficult to generate epipolar images for pushbroom satellite images. If we assume a linear transition of the sensor having constant speed and attitude during image acquisition, we can generate epipolar images based on parallel projection model (2D Affine model). Recent high resolution images are provided with RPC values so that we can exploit these values to generate epipolar images without using ground control points and tie point. This paper provides a procedure based on the parallel projection model for generating epipolar images directly from a stereo IKONOS images, and experimental results.

  • PDF

Direct Epipolar Image Generation From IKONOS Stereo Imagery Based On RPC and Parallel Projection Model

  • Oh, Jae-Hong;Shin, Sung-Woong;Kim, Kyung-Ok
    • 대한원격탐사학회지
    • /
    • 제22권5호
    • /
    • pp.451-456
    • /
    • 2006
  • Epipolar images have to be generated to stereo display aerial images or satellite images. Pushbroom sensor is used to acquire high resolution satellite images. These satellite images have curvilinear epipolar lines unlike the epipolar lines of frame images, which are straight lines. The aforementioned fact makes it difficult to generate epipolar images for pushbroom satellite images. If we assume a linear transition of the sensor having constant speed and attitude during image acquisition, we can generate epipolar images based on parallel projection model (20 Affine model). Recent high resolution images are provided with RPC values so that we can exploit these values to generate epipolar images without using ground control points and tie point. This paper provides a procedure based on the parallel projection model for generating epipolar images directly from a stereo IKONOS images, and experimental results.

A Study on the RPC Model Generation from the Physical Sensor Model

  • Kim, Hye-Jin;Kim, Dae-Sung;Lee, Jae-Bin;Kim, Yong-Il
    • Korean Journal of Geomatics
    • /
    • 제2권2호
    • /
    • pp.139-143
    • /
    • 2002
  • The rational polynomial coefficients (RPC) model is a generalized sensor model that is used as an alternative solution for the physical sensor model for IKONOS of the Space Imaging. As the number of sensors increases along with greater complexity, and the standard sensor model is needed, the applicability of the RPC model is increasing. The RPC model has the advantages in being able to substitute for all sensor models, such as the projective, the linear pushbroom and the SAR. This report aimed to generate a RPC model from the physical sensor model of the KOMPSAT-1(Korean Multi-Purpose Satellite) and aerial photography. The KOMPSAT-1 collects 510~730 nm panchromatic imagery with a ground sample distance (GSD) of 6.6 m and a swath width of 17 km by pushbroom scanning. The least square solution was used to estimate the RPC. In addition, data normalization and regularization were applied to improve the accuracy and minimize noise. This study found that the RPC model is suitable for both KOMPSAT-1 and aerial photography.

  • PDF

지상기준점 추가에 의한 IKONOS RPC 갱신 (Modification of IKONOS RPC Using Additional GCP)

  • 방기인;정수;김경옥;조우석
    • 대한공간정보학회지
    • /
    • 제10권4호
    • /
    • pp.41-50
    • /
    • 2002
  • RFM은 OGC (Open GIS Consortium)에서 권고하는 지구관측영상에 대한 표준기하모델 중 하나이다. 또한 RFM은 1m의 공간해상도를 제공하는 상업목적의 위성 IKONOS의 최종 사용자를 위한 센서 모델로서 RPC를 RFM을 위한 매개변수로서 영상과 함께 제공하고 있다. 그러나 영상의 최종사용자가 더욱 정확한 공간정보의 획득을 위해 추가적인 노력을 시도하는 경우, IKONOS는 물리적 센서모델을 위한 보조적인 정보의 제공이 미흡하기 때문에 추상적인 센서모델이나 수학적인 센서모델을 도입하게 된다. Pushbroom DLT와 같은 추상적인 센서모델을 적용하기 위해서는 영상 전체에 고르게 분포하는 다수의 GCP를 관측해야 하며, RFM과 같은 수학적인 센서모델을 적용하기 위해서도 더욱 많은 수의 GCP가 필요하게 된다. 따라서 가장 효율적인 방법은 가장 적은 수의 기준점을 이용하여 영상과 함께 제공되는 RPC를 개선하는 방법이다. 본 논문에서는 소수의 추가적인 UP를 이용하여 IKONOS의 RPC를 개량하는 2가지 방법을 제안한다. 첫 번째는 소수의 지상기준점과 normalized cubic 내에 설치된 가상의 기준점을 이용하여 RPC를 갱신하는 방법이고, 두 번째는 매개변수에 대한 관측을 도입하여 $1^{\sim}5$개의 소수 지상기준점 만으로 RPC를 갱신하는 방법이다. 본 연구에서 갱신된 RPC는 검사점을 통해 검증한 결과 갱신 전보다 RMSE가 50% 정도 개선된 것을 확인할 수 있었다.

  • PDF