• 제어로봇시스템학회논문지
• /
• 제18권12호
• /
• pp.1106-1114
• /
• 2012

To achieve synchronized motion between a wearable robot and a human user, the redundancy must be resolved in the same manner by both systems. According to the seven DOF (Degrees of Freedom) human arm model composed of the shoulder, elbow, and wrist joints, positioning and orientating the wrist in space is a task requiring only six DOFs. Due to this redundancy, a given task can be completed by multiple arm configurations, and thus there exists no unique mathematical solution to the inverse kinematics. This paper presents analysis on the kinematic and dynamic aspect of the human arm movement and their effect on the redundancy resolution of the human arm based on a seven DOF manipulator model. The redundancy of the arm is expressed mathematically by defining the swivel angle. The final form of swivel angle can be represented as a linear combination of two different swivel angles achieved by optimizing different cost functions based on kinematic and dynamic criteria. The kinematic criterion is to maximize the projection of the longest principal axis of the manipulability ellipsoid for the human arm on the vector connecting the wrist and the virtual target on the head region. The dynamic criterion is to minimize the mechanical work done in the joint space for each two consecutive points along the task space trajectory. As a first step, the redundancy based on the kinematic criterion will be thoroughly studied based on the motion capture data analysis. Experimental results indicate that by using the proposed redundancy resolution criterion in the kinematic level, error between the predicted and the actual swivel angle acquired from the motor control system is less than five degrees.

• 대한조선학회논문집
• /
• 제52권6호
• /
• pp.460-470
• /
• 2015

In general ships and FPSOs, roll damping is very small and consequently roll motion is very large at the roll resonance frequency. Proper evaluation of the roll damping coefficient at the resonance frequency is an important task in the study of roll motion and usually it is done by the analysis of free roll decay tests. The relative decrement method based on energy relation has been used mainly for the evaluation of roll damping coefficient from the roll decay test so far. As another method, the logarithmic decrement method based on equivalent linear decay assumption can be used for the same purpose and it is relatively simple. In this paper, both of the relative decrement method and the logarithmic decrement method are used for the evaluation of roll damping coefficient including quadratic damping from the free roll decay tests, and their results are cross-checked for verifying the obtained damping coefficients. Through applications to a box-type floating body equiped with bilge keels, it is shown that the two methods give almost the same damping coefficients in a practical view point and the cross-check of their results is to be a good tool to prevent a possible error. And also the quantitative effects of the bilge keels on the roll damping of box-type floating body are shown and discussed.

• 전기학회논문지
• /
• 제59권1호
• /
• pp.220-224
• /
• 2010

In this study, we designed a device for consecutively observing position, utilizing 3-axises acceleration sensor. This method offer to check his or her wrong position and developed could to help derived a position appliance. And, we developed a Cobb's angle value in three dimensional using 3-axises acceleration sensor. A proposed device with integrated accelerometers, which can detect postural changes in terms of curvature variation of the spine in the sagittal and coronal planes, has been developed with intention to facilitate posture training. The proposed device was evaluated with 3 normal subjects daily activities. We evaluated the performance of our designed device as calculating the correlation coefficients and mean errors between the angle measured by an electro-goniometer and that estimated by a gravity accelerometer and verified the accuracy and sensitivity. The results showed that the angle obtained from the proposed device revealed a linear characteristic at the range of $\pm60^{\circ}$(correlation coefficient 0.99, error range $\pm2^{\circ}$). We demonstrated that our device could detect the changes of the motion in upper trunk accurately. Also, our device showed good potential for treatment of the patients with scoliosis and prevention of the unbalance position during a daily life.

• 한국인터넷방송통신학회논문지
• /
• 제14권6호
• /
• pp.215-220
• /
• 2014

파고 부이에 설치된 가속도센서를 통해 가속도 값을 측정하고, 이를 통해 파고를 계산하는 알고리즘은 대부분 측정된 가속도값의 이중적분을 취하여 구하고 있다. 이와 같은 적분과정은 오차의 누적을 수반하게 되며, 오차의 누적은, 자칫 오측정 및 시스템의 불안정으로 이어질 수 있다. 한편, 해수면의 물입자 운동은 주기적이며 타원운동을 하고 있다는 사실이 잘 알려져 있다. 이러한 사실로 부터, 선형적 관계를 이용하여 타원 운동식을 직접 계산할 수 있으며, 이에 대한 최소값을 구함으로써 파고를 얻을 수 있게 된다. 본 연구는, 이중 적분 과정을 통해 수반되는 오차누적의 영향을 최소화하는 방법으로서 선형적 관계의 이용가능성을 확보하고자 하는데 그 목적이 있다.

• 한국항해학회지
• /
• 제23권3호
• /
• pp.35-44
• /
• 1999

This research aims to seek active control of ball-beam position stability by resorting to neural networks whose layers are given bias weights. The controller consists of an LQR (linear quadratic regulator) controller and a neural networks controller in parallel. The latter is used to improve the responses of the established LQR control system, especially when controlling the system with nonlinear factors or modelling errors. For the learning of this control system, the feedback-error learning algorithm is utilized here. While the neural networks controller learns repetitive trajectories on line, feedback errors are back-propagated through neural networks. Convergence is made when the neural networks controller reversely learns and controls the plant. The goals of teaming are to expand the working range of the adaptive control system and to bridge errors owing to nonlinearity by adjusting parameters against the external disturbances and change of the nonlinear plant. The motion equation of the ball-beam system is derived from Newton's law. As the system is strongly nonlinear, lots of researchers have depended on classical systems to control it. Its applications of position control are seen in planes, ships, automobiles and so on. However, the research based on artificial control is quite recent. The current paper compares and analyzes simulation results by way of the LQR controller and the neural network controller in order to prove the efficiency of the neural networks control algorithm against any nonlinear system.

• 한국산학기술학회논문지
• /
• 제7권2호
• /
• pp.200-205
• /
• 2006

본 논문은 치아의 전치교합(anterior occlusion)과 후치교합(posterior occlusion) 상태에서 획득된 치아 영상에 대하여 BMME와 LDA에 기반한 개인 인식 방법을 제안한다. 이 방법은 전치교합과 후치교합 상태의 치아 영상에서 치아 영역 추출, BMME, 패턴 인식 과정으로 구성된다. 이들 두 치아교합은 영상에서 일관된 자세의 치아 영상을 얻을 수 있도록 하며, BMME는 패턴 인식 과정에서 정합 오차를 줄이도록 해 준다. 치아는 딱딱하므로 치아영상을 사용하면 영상 획득 시 변형되지 않기 때문에 유용하다. 제안된 방법은 20명을 대상으로 개인 인증을 위한 치아인식 실험에서 성공적이었으며, 멀티 모달(multi-modal) 인증 시스템에 기여할 수 있음을 보였다.

• Structural Engineering and Mechanics
• /
• 제86권2호
• /
• pp.221-235
• /
• 2023

To calculate the vibrations of a tout cable subjected to axial support excitations, a nonlinear relationship of cable force and the support displacement under static situations are employed to depict the quasi-static vibration of the cable. The dynamic components of quasi-static vibration are inputted as "direct loads" to cause the parametric vibrations on the cable. Both the governing equations of motion and deformation compatibility for parametric vibrations are then derived, which indicates the high coupling of cable parametric force and deformation. Numerical solutions, based on the finite difference method, are put forward for the parametric vibrations, which is validated by the finite element method under periodic axial support excitations. For the quasi-static response, the shorter cables are more sensitive to support excitations than longer ones at small cable force. The quasi-static cable force makes the greatest contribution to the total cable force, but the parametric cable force is responsible for the occurrence of cable loosening at large excitation amplitudes. Moreover, this study also revealed that the traditional approach, assuming a linear relationship between quasi-static cable force and axial support displacement, would result in some great error of the cable parametric responses.

• 대한원격탐사학회지
• /
• 제22권4호
• /
• pp.285-294
• /
• 2006

위성영상의 한 점과 그에 대응하는 지상점의 관계를 수학적으로 나타낸 것을 센서모델이라고 한다. 위성영상의 정밀기하보정을 위해서는 오차가 없는 센서모델이 필요하다. 그러나 IMC가 꺼진 상태에서 제공된 GOES-9 궤도 데이터에 기반한 센서모델은 오차가 존재한다. 이러한 문제를 해결하기 위하여 공선 방정식 기반 모델, DLT 기반 모델, 궤도-자세 기반 모델의 세 가지 센서모델에 대하여 실험을 진행하였다. 실험에서는 위성영상과 해안선 데이터베이스를 정합시켜 성공한 결과를 기준점으로 사용하였다. 이렇게 선택된 기준점으로 세 가지 센서모델을 이용하여 GOES-9 영상에 적용시켜 초기 기하보정 정확도를 향상시키고 세 모델간의 정확도를 비교하였다. 최종적으로 궤도-자세 기반 모델이 GOES-9 영상의 정밀기하보정에 가장 적합한 센서 모델임을 증명하였다.

• 한국정밀공학회지
• /
• 제30권12호
• /
• pp.1303-1312
• /
• 2013

We report an ultra-precision lathe designed to machine micron-scale features on a large-area roll mold. The lathe can machine rolls up to 600 mm in diameter and 2,500 mm in length. All axes use hydrostatic oil bearings to exploit the high-precision, stiffness, and damping characteristics. The headstock spindle and rotary tooling table are driven by frameless direct drive motors, while coreless linear motors are used for the two linear axes. Finite element method modeling reveals that the effects of structural deformation on the machining accuracy are less than $1{\mu}m$. The results of thermal testing show that the maximum temperature rise at the spindle outer surface is approximately $0.5^{\circ}C$. Finally, performance evaluations of the error motion, micro-positioning capability, and fine-pitch machining demonstrate that the lathe is capable of producing optical-quality surfaces with micron-scale patterns with feature sizes as small as $20{\mu}m$ on a large-area roll mold.

• 대한핵의학회지
• /
• 제39권3호
• /
• pp.174-181
• /
• 2005

목적: 호흡게이트PET(이하 RGPET)을 이용하여 호흡에 의한 PET영상의 인공산물의 감소 효과를 호흡모형 팬톰을 제작하여 분석하였다. 특히 4D-CT를 시행하여 얻은 동일 호흡위상의 CT영상을 이용하여 RGPET의 감쇠 보정에 이용할 수 있도록 CT영상을 재구성하는 방법을 제시하였다. 대상 및 방법: 반복주기 6초, 진동 폭 26mm의 운동 팬톰에 각각 3 ml syringe와 10, 30 ml의 vial에 18.5 MBq (0.5 mCi) 18-F FDG를 주입한 후, 게이트의 유무에 따라 Discovery ST (GE Medical System, Milwaukee. WU) PET-CT 스캐너를 사용하여 PET/CT스캔을 시행하였다. 이때 호흡추적장치로는 적외선 CCD카메라 방식의 Real-Time Position Management (Varian Medical Systems, Palo Alto, CA)을 사용하였다. 호흡게이트PET 및 4D-CT스캔은 10% 호흡위상백분위 별로 총 10세트의 영상을 각각 획득하였다. 이와 같이 운동주기를 10개의 소 구간으로 분할하여 얻은 PET과 CT영상으로부터 각 물체의 위치를 분석하였고, 물체의 크기에 따른 운동 인공산물의 크기와 PET 계수 값의 감소간의 상관관계를 분석하였다. 결과: RGPET과 4D-CT상에서 물체의 중심위치를 호흡위상별로 분석한 결과, 오차범위 내에서 실제 위치와 잘 일치하였다. 게이트를 시행하지 않은 PET에서 관측된 물체의 크기는 상대적 운동크기에 비례하여 증가하여, 운동범위가 물체 크기의 2배가 되면 부피를 2.5배 가량 과대 평가하였다. 반면, 최대 uptake수치는 50% 가량 줄었다. 결론: RGPET을 통해 PET영상에서 나타나는 호흡으로 인한 인공산물의 대부분을 제거할 수 있음을 확인할 수 있었으며, 4D-CT스캔을 통해 획득한 동일위상의 CT 영상을 이용하여 보다 정확한 감쇠 보정 및 영상융합 결과를 얻었다.