• 한국항행학회논문지
• /
• 제27권6호
• /
• pp.849-854
• /
• 2023

본 논문은 LDMOS(laterally diffused metal oxide semiconductor)를 이용하여 동작점 Class J를 적용하고, 2차 하모닉 임피던스가 리액턴스 임피던스가 되도록 출력 정합회로를 최적화하여 고효율 전력증폭기를 설계 하였다. 설계한 전력증폭기는 주파수가 108 ~ 110 MHz에서, 전력부가효율(PAE; power added efficiency)은 P_SAT 출력(54.5 dBm)에서 71.5%, P_1dB 출력(51.5 dBm)에서 55.5%, 그리고 45 dBm에서 24.38%의 특성을 보였다. 공간변조 방식에서의 기준 신호인 CSB(carrier with sideband) 전력증폭기는 운용 출력이 45 dBm ~ 35 dBm이며, 그 출력에서 선형적인 SDM(sum in the depth of modulation) 특성(40% ± 0.3%)을 얻었다. 전력증폭기의 바이어스 동작점에 따른 진폭 변조도 특성를 측정하고, 선형적인 변조도 특성을 얻을 수 있는 최적의 동작점을 제안한다.

• Advances in aircraft and spacecraft science
• /
• 제4권5호
• /
• pp.543-553
• /
• 2017

Vibration is a source of performance degradation in all optical imaging systems. Performance of high resolution remote sensing payloads is often limited due to satellite platform vibrations. Effects of Linear and high frequency sinusoidal vibrations on the system MTF are known exactly in closed form but the low frequency vibration effects is a random process and must be considered statistically. Usually the vibration MTF budget is defined based on the mission requirements and the overall MTF limitations. For analyzing low frequency effects, designer must know all the systems specifications and parameters. With a good understanding of harmful vibration frequencies and amplitudes in the system preliminary design phase, their effects could be removed totally or partially. This procedure is cost effective and let the designer to eliminate just harmful vibrations and avoids over-designing. In this paper we have analyzed the effects of low-frequency platform vibrations on the payload's modulation transfer function. We have used a statistical analysis to find the probability of imaging with a MTF equal or greater than a pre-defined budget for different missions. The worst and average cases have been discussed and finally we have proposed "look-up figures". Using these look-up figures, designer can choose the electro-optical parameters in such a way that vibration effects be less than its pre-defined budget. Furthermore, using the results, we can propose a damping profile based on which vibration frequencies and amplitudes must be eliminated to stabilize the payload system.

• 한국해양공학회지
• /
• 제2권2호
• /
• pp.37-45
• /
• 1988

A dynamically positioned vessel must be capable of maintaining a specified position and direction by controlling the thruster devices. The motions of a vessel are often assuned to tne sum of low frequency(LF)motions and high frequency(HF)motions. The former is mainly due to wind, current and second order wave forces, while the latter is mainly due to first order wave forces. In order to avoid the high frequency thruser modulation, the control system must include filters to estimate the low frequency motions from the measured motion signals, This paper presents a control system based on Kalman filtering technique and optimal control tyeory. Using the combined kalmam filter, LF motion estimates and HF ones are achieved from the motion measurement of the vessel. The estimated low frequency motions are used as inputs to the dynamic positioning system. The thruster modulation is minimized using the optimal control theory; Linear Quadratic Gaussian(LQG)controller. The performances of the Kalman filter and the dynamic positioned vessel are investigated by computer simulation.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제4C권3호
• /
• pp.101-105
• /
• 2004

The efficient power MOSFET inverter applied for a simple and low cost power supply is proposed for driving the dielectric barrier discharge (DBD) lamp load. For decades, the DBD phenomenon has been used for ozone gas production in industry. In this research, the ultraviolet and visible light sources utilizing the DBD lamp is considered as the load for solid-state high frequency power supply. It is found that the simple voltage-source single-ended quasi-resonant ZVS inverter with only one active power switch could effectively drive this load with the output power up to 700 W. The pulse density modulation based control scheme for the single-ended quasi-resonant ZVS inverter using a low voltage and high current power MOSFET switching device is proposed to provide a linear power regulation characteristic in the wide range 0-100％ of the full power as compared with the conventional control based Royer type parallel resonant inverter type power supplies.

• 전자공학회논문지
• /
• 제50권8호
• /
• pp.67-75
• /
• 2013

OFDM (Orthogonal Frequency Division Multiplexing) 전송방식의 장점은 높은 주파수 효율, RF 간섭에 대한 강인성, 낮은 다중경로 왜곡 등을 들 수 있다. 다중 사용자 OFDM의 채널용량을 확대하기 위해서는 사용자간의 부채널과 비트할당을 위한 효율적인 알고리즘을 개발하여야 한다. 본 연구에서는 다중 사용자 OFDM 시스템에서 총전송전력을 최소화하는 부채널 및 비트 할당을 위한 0-1 정수계획법문제의 선형계획법 dual 문제의 특성을 기존의 볼록최적화기법 접근법과 비교하고 선형계획법 dual 해를 이용한 primal 휴리스틱 알고리즘을 제안한다. MQAM (M-ary Quadrature Amplitude Modulation)을 사용하고 3개의 독립적인 Rayleigh 다중 경로로 구성된 주파수 선택적 채널을 가정한 경우 MATLAB을 사용한 모의실험에서 제안된 휴리스틱 해의 성능을 기존의 MAO, ESA 휴리스틱 해 및 정수계획법 최적해와 성능을 비교하였다.

• 한국통신학회논문지
• /
• 제31권7C호
• /
• pp.713-724
• /
• 2006

본 연구의 목적은 PCM/FM 전송시스템에서 RF 대역제한을 위해 사용되는 가변 컷오프 선형위상 특성을 갖는 pre-modulation 필터를 설계, 시뮬레이션을 수행하며 이를 바탕으로 하드웨어를 구현하고 검증하는데 있다. 이러한 가변 컷오프 주파수 특성의 필터는 디지털 FIR 필터, DAC 시스템 및 가변 2차 LPF의 필터 블록으로 구성되며 각 스테이지별 진폭 주파수 응답 분석을 통해서 얻어진 진폭 감쇄 요구조건에 따라서 각 스테이지별로 설계되고 시뮬레이션이 수행된다. 수행된 결과에 따라서 하드웨어로 구현하였으며 제작이 완료된 가변 컷오프 필터의 보간을 위한 아날로그 변환부인 DAC 시스템과 가변 2차 LPF에 대해서는 시뮬레이션 과정에서 예상한 결과치와 일치하는지에 대한 검증과정이 필수적이며 이를 위해서 톤 발생기를 이용한 검증 방안을 제시한다. 검증 결과로부터 보다 정확한 주파수 응답 특성을 위해서 교정 작업을 수행하였다.

• 한국전자파학회논문지
• /
• 제24권6호
• /
• pp.661-670
• /
• 2013

본 논문에서는 고정 주파수 신호와 선형 주파수 변조 신호가 혼합된 연속 위상을 갖는 주기성 혼합 파형에 대한 선형 주파수 변조 파형의 측정 기법을 제시한다. 다양한 신호 파형을 생성하는 주파수 합성기와 송신 신호를 고출력으로 증폭하는 고출력 증폭기로 구성된 소형 레이더 송신기는 연속 위상을 갖는 혼합 파형을 생성한 다. 첫 번째로 위상이 연속적인 신호를 갖는 소형 레이더 송신기의 구성을 요약하고, 선형 주파수 변조 파형의 비정합에 의한 펄스 압축의 왜곡 특성을 고찰한다. 두 번째로 연속 위상을 갖는 혼합 파형에서 선형 주파수 변조 파형을 측정하기 위해 스펙트럼 분석기를 사용한 측정 기법, 신호원 분석기를 사용한 측정 기법 및 RF 혼합기와 위상 변위기를 사용한 새로운 측정 기법을 기술한다. 마지막으로 측정 결과를 적용한 송신 펄스 파형에 대한 수신 신호의 펄스 압축 결과로부터 측정 기법의 정확도를 확인하였다.

• ETRI Journal
• /
• 제29권3호
• /
• pp.322-328
• /
• 2007

We propose a direct-sequence pulse-amplitude modulation (DS-PAM) ultra-wideband (UWB) system which employs a non-linear chirp waveform instead of the conventional Gaussian monocycle in this paper. In the approved frequency for UWB, there exist myriad narrowband interferers. Specifically, we focus on the mutual interference between UWB systems and 802.11a WLAN. This paper offers a method to suppress this in-band narrowband interference by introducing a kind of non-linear chirp waveform. Using the proposed non-linear chirp waveform, the effects of one or more narrowband interference sources with different frequencies can be suppressed. System performance of UWB systems in the narrowband interference environment can be improved. Computer simulations with additive white Gaussian noise successfully demonstrate an increase in performance with the proposed system as compared to traditional linear chirp systems.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.528-532
• /
• 1987

Closed-loop fiber-optic gyroscope with linear scale factor for a wide dynamic range is demonstrated using a gating process and two-harmonic phase modulation, of which the second harmonic is obtained by a frequency doubler. Also the effects of the second harmonic and duty cycle of gating signal on the linearity of scale factor are estimated theoretically and compared with the measured data. The experimental results show the best linearity of scale factor is about 0.5% within the rotation rate 90.deg./sec. The closed-loop fiber-optic gyroscope with gated two-harmonic phase modulation can be used in the application demanding less sensitive performance and modest scale factor linearity.

• 대한방사선기술학회지:방사선기술과학
• /
• 제46권1호
• /
• pp.15-21
• /
• 2023

This study was purpose to assessment of the resolution characteristics by using ATS 535H Basic quality assurance (QA) phantom for ultrasound. The ultrasound equipment was used Logiq P6 (Ultrasound, GE Healthcare System, Chicago, IL, USA). And the ultrasound transducer were used Convex 4C (4~5.5 MHz), Linear 11L (10~13 MHz), Sector 3SP (3~5.5 MHz) probe. As for the noise power spectrum (NPS) comparison results by using ATS 535H Basic QA ultrasound phantom and Convex 4C, Linear 11L, Sector 3SP probe. The NPS value of the Convex 4C probe image was 0.0049, Linear 11L probe image was 0.0049, Sector 3SP probe image was 0.1422 when the frequency is 1.0 mm^-1. The modulation transfer function (MTF) comparison results by using ATS 535H Basic QA ultrasound phantom and Linear 11L probe the MTF value of the 3 cm focus image was 0.7511 and 4 cm focus image was 0.9001 when the frequency is 1.0 mm^-1. This study was presented characteristics of spatial resolution a quantitative evaluation methods by using ultrasound medical images for QA of ultrasound medical QA phantom. The quality control (QC) for equipment maintenance can be efficiently used in the clinic due to the quantitative evaluation of the NPS and MTF as the standard methods. It is meaningful in that it is applied mutatis mutandis and presented the results of physical resolution characteristics of the ultrasound medical image.