• Journal of information and communication convergence engineering
• /
• v.7 no.2
• /
• pp.235-240
• /
• 2009

This paper combines various detection techniques and analyzes their performances in detecting the transmission information of the D-STTD scheme that uses, in parallel, the STTD scheme known as the Alamouti code. The D-STTD scheme adopts one of the STTD schemes for transmission to acquire diverse effects and uses another form of STTD for multiplexing effects. Due to the multiplexing effect that transmits different data, it is difficult to apply D-STTD to the conventional STTD combining technique. This paper combines the D-STTD system with linear algorithm, SIC algorithm and OSIC algorithm known as multiplexing detection scheme based on MMSE scheme. And we propose the detection scheme of the D-STTD using MAP algorithm and analyze the performance of each system. The simulation results showed that the detector using iterative algorithm has better performance than Linear MMSE Detector. Especially, we can show that the detector using MAP algorithm outperforms conventional detector.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.8
• /
• pp.3862-3879
• /
• 2019

More and more problems for public security have occurred due to the limited solutions for drone detection especially for micro-drone in long range conditions. This paper aims at dealing with drones detection using a radar system. The radio frequency (RF) signals emitted by a controller can be acquired using the radar, which are usually too weak to extract. To detect the drone successfully, the static clutters and linear trend terms are suppressed based on the background estimation algorithm and linear trend suppression. The principal component analysis technique is used to classify the noises and effective RF signals. The automatic gain control technique is used to enhance the signal to noise ratios (SNR) of RF signals. Meanwhile, the empirical mode decomposition (EMD) based wavelet transform (WT) is developed to decrease the influences of the Gaussian white noises. Then, both the azimuth information between the drone and radar and the bandwidth of the RF signals are acquired based on the statistical analysis algorithm developed in this paper. Meanwhile, the proposed accumulation algorithm can also provide the bandwidth estimation, which can be used to make a decision accurately whether there are drones or not in the detection environments based on the probability theory. The detection performance is validated with several experiments conducted outdoors with strong interferences.

• Journal of applied mathematics & informatics
• /
• v.8 no.2
• /
• pp.641-649
• /
• 2001

A procedure of detecting change-points is considered with split linear fitting idea from Hall and Titterington(1992). At each given point, left, central and right linear fits are compared to detect the discontinuities or change-points. A simulation study is done with various types of change models and shows that the suggested technique can be a flexible data-analytic tool.

• ETRI Journal
• /
• v.29 no.1
• /
• pp.110-112
• /
• 2007

As an alternative to the classic linear detector which only assumes noise variance, a new robust detector with noise variance estimation censoring input signals over AWGN is proposed. The results demonstrate that analytic detection probability matches the simulation results for the linear detector and that the new robust detector shows better performance than the linear detector when the number of samples increases.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.5
• /
• pp.214-221
• /
• 2015

In this paper, we present robust estimation and detection algorithms for discrete-time switched linear systems whose output measurements are corrupted by noises. First, a mode estimation algorithm is proposed based on the minimum distance criterion. Then, state variables are also observed under the active mode estimate. Second, a detection algorithm is constructed to detect the mode switching of the switched system. With the boundedness of measurement noise, the proposed estimation algorithm returns the exact active mode and approximate state information of the switched system. In addition, the detection algorithm can detect the switching time within a pre-determined time interval after the actual switching occurred.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.6
• /
• pp.36-42
• /
• 2007

According to the increased demand of high quality multimedia content, it needs to recover an old movies. But the film of old movie is damaged with line scratches and dust. In this paper, the detection and restoration algorithm of B/W line scratch is proposed. Our scheme estimates and interpolates the damaged partial information of line scratch using the linear recursive curve trace which consider the intensity values of left and right region of line scratch and then median filtering processed. As a result, the film image PSNR 44.68 with B/W line scratch is increased up to 48.60 and the intensity of the interpolate pixel is approached about 14 against the pixel of original image.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.5 no.1
• /
• pp.59-64
• /
• 2002

Passive sonar system forms the various beams in any desired directions to obtain the improvement in Signal-to-Noise(S/N) ratio, bearing detection and localization of targets, and the attenuation of interferences from other directions. Detection of modern underwater targets is becoming increasingly difficult as noise reduction technology leads to considerably low-level acoustic emissions. Therefore, the improvement of beamforming is very important to detect modern underwater targets at the long range in the complex environmental sea. Also, to react to the fast attack mobiles such as torpedoes, port and starboard discrimination is required to be performed very quickly. In this paper, we proposed the implementation of omnidirectional target bearing detector without port and starboard ambiguity to detect effectively the low-level underwater targets. The port and starboard discrimination is performed by cardioid processing and the improvement of beamforming utilizes the cross correlation matrix of individual hydrophone pairs of linear array sensors. The sea test result shows that the system implemented is good for the detection of the low-level underwater targets.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.2
• /
• pp.87-95
• /
• 2008

Ladar (Laser Detection And Ranging, Lidar) is a sensor to acquire precise distances to the surfaces of target region using laser signals, which can be suitably applied to ATD (Automatic Target Detection) for guided missiles or aerial vehicles recently. It provides a range image in which each measured distance is expressed as the brightness of the corresponding pixel. Since the precise 3D models can be generated from the Ladar range image, more robust identification and recognition of the targets can be possible. If we simulate the data of Ladar sensor, we can efficiently use this simulator to design and develop Ladar sensors and systems and to develop the data processing algorithm. The purposes of this study are thus to simulate the signals of a Ladar sensor based on linear frequency modulation and to create range images from the simulated Ladar signals. We first simulated the laser signals of a Ladar using FM chirp modulator and then computed the distances from the sensor to a target using the FFT process of the simulated signals. Finally, we created the range image using the distances set.

• Journal of the Korean Society for Railway
• /
• v.11 no.5
• /
• pp.477-481
• /
• 2008

This paper dealt with a detection method of series arc existence which is a symptom of electric fires in low-voltage system. The proposed detection circuit consists of a high-pass filter with a low cut-off frequency of 3kHz to attenuate power frequency voltage by 80 dB and an active band-pass filter with a center frequency of 4kHz to detect only the series arc signals. The performance of the circuit was evaluated in a phase-controlled incandescent lamp as a non-linear load and an inverted-fed induction motor as a high frequency load by using the arc generator specified in UL1699. From the experimental results, it was confirmed that the proposed method solved the detection error, which is being the most problem, by discriminating the series arc signal even in non-linear and high frequency loads.

• Communications for Statistical Applications and Methods
• /
• v.26 no.6
• /
• pp.539-556
• /
• 2019

This paper derive a method to solve change point regression problems via a process for obtaining consequential results using properties of a difference-based intercept estimator first introduced by Park and Kim (Communications in Statistics - Theory Methods, 2019) for outlier detection in multiple linear regression models. We describe the statistical properties of the difference-based regression model in a piecewise simple linear regression model and then propose an efficient algorithm for change point detection. We illustrate the merits of our proposed method in the light of comparison with several existing methods under simulation studies and real data analysis. This methodology is quite valuable, "no matter what regression lines" and "no matter what the number of change points".