• Journal of Korean Society of Transportation
• /
• v.13 no.3
• /
• pp.67-86
• /
• 1995

It requires the detector system which can collect highly reliable traffic data in order to perform the real-time traffic signal control. This study is to decide the optimal shape of inductive loop for the real-time traffic signal control .This loop is located at the stopline in the signalized intersection for DS(Degree of Saturation) control. In order to find out the optimal shape of loop, 6types of experiments were performed . The results of the basic experiments of loops are as follows ; -the optimal number of turns for loop is 3 turns. -the impedance values of the loop detectors are similar to that of NEMA standards -the 1.8${\times}$4.5M loop is excellent for sensitivity in actual detection range of car length comparing to other shape of inductive loops. At the experimental of establishments of the optimal loop shape, it found that 1.8 4.5M loop has the highest values of $\DeltaL$ comparing to other types of loops, It means that the range of Lead-in cable length of this loop. And this loop is highly reliable in occpupancy time. Conclusivley, the 1.8${\times}$4.5M inductive loop is the optimal solution as a stop line loop detector for real -time traffic signal control.

• Fashion & Textile Research Journal
• /
• v.10 no.1
• /
• pp.68-75
• /
• 2008

Demands and attempts to express Korean traditional beauty are increasing. Some schools choose the uniform in designs expressing the image of Hanbok, but recently there is a few increment of wearing the uniforms. For the improvement of the uniforms, first of all, the shape and the clothing materials of the uniforms should be considered. We have compared and analyzed the shape and the clothing materials of the uniforms reflecting the image of Hanbok, according to seasons and clothing items. The uniforms reflecting the image of Hanbok were worn in eight schools and all of them are Saenghwal Hanbok style. The shape of Saenghwal Hanbok school uniforms showed both Korean style and western style characteristics. Korean style characteristics were expressed through the appearance-related parts while western style characteristics showed through the performance-related parts such as open/closure method, armhole pattern and straight sleeve line. It was shown that girls' uniforms are more diverse and similar to the western style uniforms than boys' uniforms. It was found that most of the clothing material were synthetic fiber or mixture of natural/synthetic fiber, and polyester was shown to be used most.

• Fashion & Textile Research Journal
• /
• v.12 no.5
• /
• pp.619-625
• /
• 2010

The purpose of this research is to analyze the shapes of blouse with above-elbow sleeves according to arm movements. The shapes include five types of the arm movement(basic posture, reach forward 45, 90, and reach lateral 45, 90) in the stand-posture, which were made by different adaptability of clothes. Experiments were conducted to figure out the dressed shape through 3-D measurement Vivid 910, and also to investigate the area of the shape of sleeves on the section map and the diagonal length of the block made by the basic section line in lateral part of sleeve with Rapid Form 2004, a software for 3-D shape analysis. The Data were analyzed by factor analysis, Anova, Duncan test, t-test. The results of this study were as follows: First, the area of sleeve was briefed 3 factor; front, center, back in sleeve. Second, there were different effect of arm movement, section level and part of shapes in the area of sleeve. Third, the diagonal length was briefed 4 factor; back, back-center, front-center, front. Forth, after t-test, there were statistically significant between the reach forward and lateral and between the angles of arm reach.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.12S
• /
• pp.1286-1291
• /
• 2003

Quench behavior of resistive superconducting fault current limiters (SFCLS) with various pattern shapes was investigated. The pattern shapes employed were meander, bi-spiral, and spital shapes of identical line width, gap and margin. SFCLS were fabricated from YBCO thin films grown on two-inch diameter Al$_2$O$_3$ substrates under the same conditions. The total length of current limiting paths was the shortest at the spital shape due to its larger useless space. Inductance component of SFCLs with the spiral shape was around two times as high as those of other two shapes. This is not desirable since impedance characteristics of existing power systems can be changed. Resistance rise of current limiting elements was low at a spiral shape before the whole quench completion, which may act as a disadvantage for simultaneous quench in serial connection between current limiting elements, but the temperature tended to have similar values at higher voltages. On the other hand, hi-spital shape was severe at insulation level between current limiting lines. When these aspects were considered, we concluded that a meander shape was appropriate to design for a resistive SFCL based on thin films except the concentration of electric field at edge areas of strip lines.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.05a
• /
• pp.269-273
• /
• 2003

During the laser welding, weldments are suddenly heated by laser beam and cooled. This phenomenon gives occasion to complex welding residual stresses, which have a great influence on structural instability strength, in laser welds. However, a relevant research on this field is not sufficient until present and residual stress measurements have experimental and practical limitations. For these reasons a numerical simulation may be attractive in order to solve the residual stress problem. In order to determine the distribution of heat and welding residual stresses in laser welds with the nail-head shape, authors conduct the finite element analysis (two-dimensional unstationary heat conduction & thermal elasto-plastic analysis). From the result of this study, we can confirm the stress concentration is occurred at the place of melting line shape changed in laser welds with the nail-head shape.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.22 no.4
• /
• pp.93-104
• /
• 2020

This paper focuses on the spatial changes that create a three-dimensional or deep feeling on the surface of a scarf centering on the cube shape. Through this, consumers with various tastes were able to satisfy their image presentation. The cube form has simplicity and order and is likely to be used as a formative object. The cube shapes can be expressed in various forms through visual and perceptual spatial changes by presenting various shape changes based on the viewpoint of the two-dimensional silk surface, that is, by changing the eyes' position and orientation. Various visual theorists' discussions about cube-shaped visual changes were discussed. In addition, the three-dimensional spatial illusion caused by the shape and color of Victor Bazaarelli's cube was examined. The cube shape was printed silk surfaces to give a three-dimensional sense of space on a two-dimensional scarf design using the size change, the difference in the length of the line, and the color change. As such, the cube shape has infinite possibilities as a method that can express three-dimensional depth and space on the flat surface of a scarf. Therefore, it is hoped that this study will be applied to various aspects as the basic data for the scarf design that expresses the spatial changes in the form of cubes.

• Journal of Korea Multimedia Society
• /
• v.5 no.3
• /
• pp.255-262
• /
• 2002

A boundary sequence can be a good representation of arbitrary shapes, because it can represent them simply and precisely. However, boundary sequences have not been used as a representation of arbitrary shapes, because the pixel-based shape-features such as area, centroid, orientation, projection and so forth, could not be computed directly from them. In this paper, we show that the shape-features can be easily computed from the boundary sequences by introducing the cross-sections that are defined as vertical (or horizontal) line segments in a shape. A cross-section generation method is proposed, which generates cross-sections of the shape efficiently by tracing the boundary sequence of the shape once. Furthermore, a boundary sequence extraction method is also proposed, which generates a boundary sequence for each shape in a binary image automatically The proposed methods work well even if a shape has holes. Eventually, we show that a boundary sequence can be used effectively for representing arbitrary shapes.

• Journal of Internet Computing and Services
• /
• v.10 no.5
• /
• pp.183-194
• /
• 2009

In this paper, we propose a new method for detecting objectionable images with an active shape model. Our method first learns the shape of breast lines through principle component analysis and alignment as well as the distribution of intensity values of corresponding landmarks, and then extracts breast lines with the learned shape and intensity distribution. To accurately select the initial position of active shape model, we obtain parameters on scale, rotation, and translation. After positioning the initial location of active shape model using scale and rotation information, iterative searches are performed. We can identify adult images by calculating the average of the distance between each landmark and a candidate breast line. The experiment results show that the proposed method can detect adult images effectively by comparing various results.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.7 s.250
• /
• pp.622-629
• /
• 2006

The shape optimization of blade sweep in a transonic axial compressor rotor of NASA Rotor 37 has been performed using response surface method and the three-dimensional Wavier-Stokes analysis. Two shape variables of the rotor blade, which are used to define the rotor sweep, are introduced to increase the adiabatic efficiency of the compressor. Throughout the optimization, optimal shape having a backward sweep is obtained. Adiabatic efficiency, which is the objective function of the present optimization, is successfully increased. Separation line due to the interference between a shock and surface boundary layer on the blade suction surface is moved downstream for the optimized blade compared to the reference one. The increase in adiabatic efficiency for the optimized blade is caused by suppression of the separation due to a shock on the blade suction surface.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.187-189
• /
• 2004

This paper presents the system widely used for extraction of human body recognition system in the field of bio-metric identification. The Human body recognition system is used in many fields. This biological is appled to the human recognition in banking and the access control with security. The important algorithm of the identification software usese hand lines and hand shape geometry. We used the simple algorithm and recognizing the person by their hand image from the input camera. The geometrical characteristics in hand shape such as length of finger to whole hand length thickness of finger to length, etc are used.