• Proceedings of the KIEE Conference
• /
• 2000.07e
• /
• pp.74-78
• /
• 2000

In this paper a switching control circuit for shaping the line current and reducing the total harmonics distortion in the boost converter is presented. To solve the problems of performance degradation due to pulse waveform in the input current, the boost converter in which the harmonic distortion in the input current is reduced using a 3th harmonic-injected PWM is proposed. Finally, Simulation and experimental results of boost converter with 5[kHz] switching frequency are presented and correction of power factor and reduction of total harmonic distortion was established.

• Speech Sciences
• /
• v.11 no.4
• /
• pp.17-28
• /
• 2004

In this paper, we propose a statistical approach to improve the performance of spectral quantization of speech coders. The proposed techniques compensate for the distortion in a decoded line spectrum pairs (LSP) vector based on a statistical mapping function between a decoded LSP vector and its corresponding original LSP vector. We first develop two codebook-based probabilistic matching (CBPM) methods based on linear mapping functions according to different assumption of distribution of LSP vectors. In addition, we propose an iterative procedure for the two CBPMs. We apply the proposed techniques to a predictive vector quantizer used for the IS-641 speech coder. The experimental results show that the proposed techniques reduce average spectral distortion by around 0.064dB.

• Structural Engineering and Mechanics
• /
• v.4 no.1
• /
• pp.37-47
• /
• 1996

The paper considers the elastic distortional buckling of overhanging beams, which consist of an internal segment with a cantilevered segment continuous over an internal support. The beams were considered loaded by a concentrated load at the cantilever tip, and the beams were either partially restrained or laterally restrained over the internal support. An efficient line-type finite element developed previously by the author was modified to incorporate loading remote from the shear centre, as well as to allow for lateral buckling without distortion. Buckling loads were obtained for a range of geometry when the load was placed on the top flange, at the shear centre or on the bottom flange. Buckling mode shapes were also obtained, and conclusions drawn regarding the influence of distortion on the overall buckling load.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.4
• /
• pp.680-686
• /
• 2006

Document images captured by scanners have only skewing distortion. But camera captured document images have not only skew but also vignetting effect and geometric distortion. Vignetting effect, which makes the border areas to be darker than the center of the image, make it difficult to separate characters from the document images. But this effect has being decreased, as the lens manufacturing skill is developed. Geometric distortion, occurred by the mismatch of angle and center position between the document image and the camera, make the shape of characters to be distorted, so that the character recognition is more difficult than the case of using scanner. In this paper, we propose a method that can increase the performance of character recognition by correcting the geometric distortion of document images using a linear approximation which changes the quadrilateral region to the rectangle one. The proposed method also determine the quadrilateral transform region automatically, using the alignment of character lines and the skewed angles of characters located in the edges of each character line. Proposed method, therefore, can correct the geometric distortion without getting positional information from camera.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.12
• /
• pp.6052-6059
• /
• 2012

This paper deals with the Harmonics on the power lines in the computer room. The voltage and current at each phase of electric power from UPS to the load must be ensured less than 5% distortion rates according to the regulation terms from KEPC(Korea Electric Power Corporation) and the KSC4310 Uninterruptible Power Supply regulation. However, measurements show that the voltage distortion rate conforms those regulations but the current distortion rate exceeds much the limit. This current distortion is stabilized from 34.98% to 15.22% nearly half by an AC current filter.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.1
• /
• pp.155-161
• /
• 2005

Nonlinear electronic loads used at office buildings distort the voltage and current waveform that cause the overheating of transformer losses, ELB(Electrical Leakage Breaker) tripping, and so on. This paper analyzed waveform distortion characteristics at several once buildings by comparing with magnitude of voltage and current harmonics, crest factor of voltage and current, phase voltage and current unbalance. As a consequence, severe current waveform distortion in phase and neutral line by harmonics and high current unbalance rates by unbalanced using of single loads among the three phases are investigated. The results of the study can be used in making decisions regarding reasonable and economical operating of loads at office buildings.

• Journal of Fashion Business
• /
• v.18 no.2
• /
• pp.14-28
• /
• 2014

This study analyzed the group of experts who were related to cubism, selected among the works of 2010~2013 Paris Collection based on F.G.R.(Focus Group Research). According to the results of this study, there were appeared first, 'a one-piece dress' second, 'H silhouette' third, 'cotton', in case of item distribution and frequency. The analysis was done by using the manner of expression, cubical expression, exaggeration, distortion, dismantlement, geometrical division of face, mix-match look, wraparound repetition, asymmetric structure, etc. Based on the outcomes of the analysis on figurative design elements, this study adjusted three manners appearing on cubism fashion style. First, it was 'avant garde manner' of constitution or 'dismantlement' which was compiled into multi-view representations of overlaps and viewpoints by repetitive use of color tone trimming detail. Second, it was 'geomagnetic block placement' which expresses cubism with geometric partitioning of surface and separation of panel by cutting disintegration. Finally, it was 'distortion and simplification of silhouette' which is a distortion created by constitution-line pressed thin with silhouette. It maximizes the beauty of human body outline, which was distorted by three-dimensional-manipulation, and simplified by ellipsis for another shape for the extension or expansion of detail trimming.

• Proceedings of the KWS Conference
• /
• 2005.06a
• /
• pp.285-287
• /
• 2005

During fabrication of deck house block in passenger ships, the problem of unexpected large deformation and distortion frequently occurs. In this case, line and spot heating method were widely used to correct the distortion of thin plate structure. Spot heating was especially used for the case under 5mm thickness. Few papers are available on the working conditions of spot heating method but only little information on deformation control. In this study, evaluation was carried out on the temperature distribution of spot heating methods using FEA and practical experiments for various heating time. IIn FEA, heat input model was established using Tsuji's double Gaussian heat input mode (Tsuji, I., 1988). This model was verified by comparing with experimental data. Also radial shrinkage and angular distortion due to spot heating were determined and compared with experimental results. Thermo elasto-plastic analysis was performed using commercial FE code, MSC/MARC. Radial shrinkage and angular distortion were measured using 3D measuring apparatus. Based on these results, simplified analysis model for deformation by spot heating was established.

• ETRI Journal
• /
• v.31 no.6
• /
• pp.680-687
• /
• 2009

This paper reports on an improved piezoelectric microspeaker with a high sound pressure level of 90 dB, a total harmonic distortion of less than 15%, and coherence higher than 0.9. The fabricated Pb(Zr,Ti)$O_3$ (PZT) microspeakers have a thickness of only 1 mm including the speaker frame and an active area of 18 mm${\times}$20 mm. To achieve higher sound pressure and lower distortion, the PZT piezoelectric microspeaker has a well-designed speaker frame and a piezoelectric diaphragm consisting of a tilted PZT membrane and silicone buffer layer. From the simulation and measurement results, we confirmed that the silicon buffer layer can lower the first resonant frequency, which enhances the microspeaker's sound pressure at a low frequency range and can also reduce useless distortion generated by the harmonics. The fabricated PZT piezoelectric microspeakers are implemented on a multichannel speaker array system for personal acoustical space generation. The output sound pressure at a 30 cm distance away from the center of the speaker line array is 15 dB higher than the sound pressure at the neighboring region 30 degrees from the vertical axis.

• The Journal of the Korea Contents Association
• /
• v.7 no.11
• /
• pp.34-42
• /
• 2007

In this paper, we propose a staff-line detection and removal algorithm from a music score image obtained by a mobile phone camera. As a preprocessing technique to recognize a music score image, staff-line detection and removal should be efficiently applied to the skewed or curved images. The proposed method detects a staff-line by dividing a staff according to the degree of distortion. The number of division is calculated by dividing a staff repletely until an average of differences of y coordinates in every divided position is smaller than a threshold. Therefore, the number of division can be adaptively estimated according to the degree of the distortion. For an experiment, we make various kinds of images by rotating one from $1^{\circ}\;to\;3^{\circ}$ or curving slightly upward. The results show that the proposed method performed well on the experiment images.