• Journal of Welding and Joining
• /
• 제4권2호
• /
• pp.30-39
• /
• 1986

In manufacturing of pipe walls for boiler units, distortion can result in pipe-web-pipe joints from the nonuniform expansion and contraction of the weld metal and the adjacent base metal during heating and cooling cycle of the welding process. In this study, the stresses and strains during longitudinal welding of the plate-to-pipe joint were investigated. Using the method of successive elastic solution, longitudinal stresses and strains during and after welding were calculated from the information of temperature distributions obtained by Rosenthal's equations. In order to confirm the validity of the numerical results, the temperature and residual stress distributions were measured and compared with the calculated results. In spite of some assumptions, the one-dimensional analytical results of residual stresses were in fairly good agreement with the experimental ones. The residual stresses due to welding of plate-to-pipe joints are tensile near the weld line and compressive in the base metal as in the welding of plates. the amount and distribution of residual stresses were deeply dependent on the heat input ratio of the plate and pipe.

• Journal of Advanced Research in Ocean Engineering
• /
• 제1권3호
• /
• pp.148-156
• /
• 2015

Deck plates of ships or offshore structures would make out-of-plane distortion for their thin thickness. These distortions are usually straightened by thermal straightening such as flame heating method. After thermal straightening, the blocks are lifted and moved by cranes to assemble it at dry-dock stage. After this lifting process, out-of-plane deformation again happens frequently. And then, they continuously cause quality and accuracy problems in the final dry-dock process. So, it takes more time for repair and correction working. According to preceding research, the lifting process by cranes would offset the effect on thermal straightening. The target of this study is to develop a methodology analyzing the remaining efficiency of thermal straightening after block lifting. The development was based on the assumption of yield state at straightening region. Therefore the remaining efficiency was obtained by different stiffness slope while lifting & relieving. The efficiency formula was designed using inherent strain, and we made a table of zero-efficiency by cooling speed and class rule's steels. As a result, if the stress orthogonal to straightened line is calculated during lifting analysis by FEA, the efficiency can be obtained linearly to the values in the table. Finally, even optimized carling position can be designed by considering the regional data from series project and welding region on deck.

• 전력전자학회논문지
• /
• 제4권1호
• /
• pp.91-98
• /
• 1999

본 논문에서는 역률개선용 단일 스위치 부스트 플라이백 결합형 ZCS quasi-resonant converter(QRC)를 제안한다. 제안된 컨버터는 입력전류를 불연속 모드로 동작시켜 역률을 개선하며 입력전류의 zero-crossing-point에서의 왜곡을 개선함으로써 고조파를 감소시켜 역률을 향상시켰으며 좋은 출력전압의 regulation 성능을 가지고 있다. 그리고 체계적인 설계를 위하여 설계식을 제안하였으며 제안된 설계식을 통하여 프로토타입 컨버터를 설계하였다. 실험결과 효율은 약 86%, 역률은 약 0.985이상을 얻었다. 따라서 본 컨버터는 스위칭 주파수가 수백 kHz이상이고 높은 regulation성능을 요구하는 낮은 전압의 소용량 컨버터에 적합하다.

• Journal of Power Electronics
• /
• 제16권4호
• /
• pp.1288-1297
• /
• 2016

This study proposes a single-stage light-emitting diode (LED) tube lamp driver with input-current shaping for T8/T10-type fluorescent lamp replacements. The proposed AC-DC LED driver integrates a dual-boost converter with coupled inductors and a half-bridge series-resonant converter with a bridge rectifier into a single-stage power conversion topology. This paper presents the operational principles and design considerations for one T8-type 18 W-rated LED tube lamp with line input voltages ranging from 100 V rms to 120 V rms. Experimental results for the prototype driver show that the highest power factor (PF = 0.988), lowest input current total harmonic distortion (THD = 7.22%), and highest circuit efficiency (η = 92.42%) are obtained at an input voltage of 120 V. Hence, the proposed driver is feasible for use in energy-efficient indoor lighting applications.

• 전력전자학회논문지
• /
• 제18권6호
• /
• pp.573-578
• /
• 2013

In the case of the Back EMF voltage contains the harmonics, the motor torque ripple and vibration is occurred by the current pulsation, because IPMSM control algorithm is the model which is assumed that it contains a sinusoidal Back EMF voltage. To improve ride quality, in the case of IPMSM for EV, improving the torque control characteristics is necessary. Therefore, there is a need to minimize the influence of the harmonics. In this paper, the investigation to decrease the current distortion factor has been performed for improving torque control characteristics by applying the non-sinusoidal Back EMF to IPMSM model.

• Progress in Superconductivity
• /
• 제5권1호
• /
• pp.26-30
• /
• 2003

Magneto-cardiogram(MCG) signals may be highly distorted by the environmental noise, such as power-line interference, broadband white noise, surrounding magnetic noise, and baseline wondering. Several kinds of digital filters and noise cancellation methods have been designed and realized by many researchers, but these methods gave some problems that the original signal may be distorted by digital filter due to the wideband characteristics of background noise. To eliminate noise effectively without distortion of MCG signals, we performed multi-level frequency decomposition using wavelet packets and local adaptive noise cancellation in each local frequency range. In addition to the proposed wavelet filter to eliminate these various non-stationary noise elements, the local adaptive filter using the least mean square(LMS) algorithm and the soft threshold do-noising method are introduced in this paper. The signal to noise ratio(SNR) and the reconstruction square error(RSE) are calculated to evaluate the performance of the proposed method and compared with the results of the conventional wavelet filter and adaptive filter. The experimental results show that the proposed local adaptive filtering method is better than the conventional methods.

• 한국강구조학회 논문집
• /
• 제16권1호통권68호
• /
• pp.61-72
• /
• 2004

우리나라에서는 생산되는 I형강을 대상으로 비탄성 휨-뒤틀림 좌굴에 대하여 연구하였으며 잔류응력은 다항식형과 단순형으로 고려하였다. 또한 웨브의 면의 뒤틀림이 구속된 보의 비탄성 휨-비틀림 좌굴에 대해서도 알아보았다. 해석결과를 강구조편람의 허용 휨응력과 비교하였다. 균일한 휨을 받는 보의 경우는 비탄성 휨-비틀림 좌굴이 중요한 큰 영향을 미치지 않았으나, 중간 브레이싱이 없는 단지간 및 중지간보의 경우 강구조편람에 의한 설계는 과설계가 됨을 알 수 있었다.

• KIEAE Journal
• /
• 제14권4호
• /
• pp.91-96
• /
• 2014

The behavior of walking involves our action of seeing things. It is the intention of this research that the cognitive process of perceiving things along the path can affect the way we sense the length of the journey. The theory generally accepted in this line of thought is the 'feature accumulation theory'. It assumes that if the journey includes many objects or memorable features, then our memory recalls that journey much farther than it really was. This study set up a real-life experiment by asking university students about their mental memory of the two different routes in the campus. One is a longer path that has not much to look at except trees and the other a shorter path yet with many buildings, sign boards and street furnitures. The subjects processed their mental image in the brain based on their experience. They showed a strong tendency that the path with more features were remembered longer while that with less features shorter. More interestingly, it was found that as their experience increases, they become more accurate about the exact length of the questioned paths. The result corroborates the theory that human perception of space is based on the topological understanding of surroundings rather than geometric understanding.

• 한국광학회지
• /
• 제21권4호
• /
• pp.146-150
• /
• 2010

디지털 홀로그래피에서 재생상을 재생할때 복소공액 홀로그램을 도입하여 위상 왜곡과 잡음이 제거된 재생 영상을 얻는 방법에 대하여 연구하였다. 일반적으로 디지털 홀로그램은 시료의 위상 정보 외에 위상 정보에 겹쳐져 있어 잡음으로 작용하는 허상, DC항 뿐만 아니라 측정 시스템의 위상 왜곡 현상도 모두 포함되어 기록된다. 기록된 홀로그램에서 시료의 위상 정보만을 분리하여 이를 재생하면 질 좋은 위상 재생상을 얻을 수 있다. 본 연구에서는 복소공액 홀로그램을 이용하면 off-axis 및 in-line 홀로그래피에서 위상왜곡과 측정시스템이 가지고 있는 잡음을 제거 할 수 있음을 실험적으로 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1364-1366
• /
• 1998

An active-matrix LCD using thin film transistors (TFT) has been widely recognized as having potential for high-quality color flat-panel displays. Pixel-Design Array Simulation Tool (PDAST) was used to profoundly understand the gate signal distortion and pixel charging capability, which are the most critical limiting factors for high-quality TFT-LCDs. Since PDAST can simulate the gate, data and pixel voltages of a certain pixel on TFT array at any time and at any location on an array, the effect of the resistivity of gate line material on the pixel operations can be effectively analyzed. The gate signal delay. pixel charging ratio, level-shift of the pixel voltage were simulated with varying the parameters. The information obtained from this study could be utilized to design the larger area and finer image quality panel.