• Journal of Environmental Impact Assessment
• /
• v.15 no.1
• /
• pp.79-92
• /
• 2006

Environmental capacity assessment of Busan city was conducted to provide basis for planning on sustainable development and growth of the city. Using Onish model, assessment was carried out on amenities and service facilities for the citizens of Busan city. Ecological Footprint model was used to judge if the city exceeds the its environmental capacity and to estimate the extent of the excess if it exists. The analysis using Onish model revealed that the citizens of Busan city are generally well supported by the infrastructure and service facilities of the city. Water treatment and supply facilities have enough capabilities to support the city, whereas the relatively low rate of sanitary sewer supply (78%) suggests the need for further improvement in the wastewater area. The capacities of sanitary landfills are found sufficient enough to support the city for the next 10 years. The high value for the line length served per capita in the subway sector hints on certain inconvenience of commuters. All the air quality indicators meet the Korean and WHO standards except for $NO_2$. The ecological footprint model analysis produced EF indicators for Busan city of 3.04 ha/person and 2.54 ha/person for the years of 1993 and 2003, respectively. The decrease of the indicator from 1993 to 2003 is mainly due to the incorporation of Gijang area by Busan city in 1995, suggesting the importance of the ecologically productive area in the evaluation using this model. The analysis on the ecological deficit that is based on ecologically productive land shows that the consumption by Busan city exceeds its ecologically available production by 19,600% as of 2003. The area needed to support the consumption of Busan city in 2003 is 123 times as large as the present area of Busan city, which is substantially lower than the multiplier (742) obtained for Seoul city in 1997 but is higher than those observed for Chongju city (71 in 1999) and Ulsan city (39 in 2001).

• Journal of Soil and Groundwater Environment
• /
• v.28 no.6
• /
• pp.71-89
• /
• 2023

A groundwater potential map (GPM) was built for the Nakdonggang River Basin based on ten variables, including hydrogeologic unit, fault-line density, depth to groundwater, distance to surface water, lineament density, slope, stream drainage density, soil drainage, land cover, and annual rainfall. To integrate the thematic layers for GPM, the criteria were first weighted using the Analytic Hierarchical Process (AHP) and then overlaid using the Technique for Ordering Preferences by Similarity to Ideal Solution (TOPSIS) model. Finally, the groundwater potential was categorized into five classes (very high (VH), high (H), moderate (M), low (L), very low (VL)) and verified by examining the specific capacity of individual wells on each class. The wells in the area categorized as VH showed the highest median specific capacity (5.2 m³/day/m), while the wells with specific capacity < 1.39 m³/day/m were distributed in the areas categorized as L or VL. The accuracy of GPM generated in the work looked acceptable, although the specific capacity data were not enough to verify GPM in the studied large watershed. To create GPMs for the determination of high-yield well locations, the resolution and reliability of thematic maps should be improved. Criterion values for groundwater potential should be established when machine learning or statistical models are used in the GPM evaluation process.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.31 no.2
• /
• pp.82-91
• /
• 1989

This study was carried out to get the basic information of irrigation plans for the red pepper, such as optimum irrigation level and irrigation requirement in Taegu and Kyungpook province. In this study, red peppers were cultivated in 6 PVC pot lysimeters filled with 60cm deep clay loam soil. Four tensiometers were installed in each plot to measure the soil water pressure head. Field measurements were made during the period June 6 to October 31, 1988 at the experimental farm of Kvungpook National University. Six levels of irrigation were used. They were PF 1.8-2.0, PF 2.2-2.4, PF 2.8-3.0, FC-PF.1.7, FC-PF 2.2, and FC-PF 2.7. The results obtained from this study are summarized as follows : 1. In case of irrigation levels of narrow ranges of water contents, the higher the soil water content was, the larger the ET was. Hut in case of the irrigation levels returning to the field capacity, the lager the PF value of irrigation point was, the larger the ET was. Considering ET, yield and weight per fruit, the latter is much better than the former irrigation method. 2. The mean daily ET and mean ET ratio for each 10-day period showed that the maximum value occured in the last of August. The ranges of those were 3.74-14.64 mm/day and 0.87-3.40, respectively. These values showed that small during the early stage of growth, large during the middle stage and getting smaller in the last stage. 3. In case of irrigation levels of narrow ranges of water contents, the increase of irrigation water supplied increased the ET. The relationship between the two showed nearly straight line. Most of irrigated water was consumed as ET and the rest as percolation. But, in case of irrigation levels returning to the field capacity, the higher the PF value of irrigation point was, the larger the ET ratio was. However, their relationship didn't show straight line. 4. The irrigation level of PC - PP 2.7 was found to be the optimum irrigation level with respect to the yield, the weight per fruit, stem length, irrigation requirement and percolation quantity. In this case, mean daily ET and mean ET ratio were 6.79 mm/day (total 10052 mm) and 1.67, respectively. The maximum mean daily ET and mean ET ratio for 10-day period were 14.64 mm/day and 3.40, respectively, in the last of August, and the maximum daily ET was 2126 mm/day on August 24. 5. In case of PC - PP 2.7 which is found the optimum irrigation level, mean irrigation water required, mean ET and mean percolation water quantity were 7.44 mm/day, 6.79 mm/day(91.3% of irrigation water), and 0.38 mm/day (5.5% of it), respectively.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.1
• /
• pp.131-144
• /
• 2018

The urban center of a large city has a high concentration ratio of population, commerce, and traffic. Therefore, the expected effect is high from the introduction of the urban utility tunnel and it also has sufficient economic feasibility considering life cycle cost. Moreover, the construction cost can be greatly reduced if it is included in a large underground development such as a subway or a complex transfer center construction. However, it is not reflected in actual underground development plan. When planning a urban utility tunnel in Korea, it is expected to have difficulties such as the cost of relocation of the existing Life-Line, conflicts among the individual facility institutions, procurement of construction resources and sharing. Furthermore, it is possible to promote the project only if a consensus is drawn up by a collective council composed of all facilities and project developers. Therefore, an optimal alternative should be proposed using economic analysis and feasibility assessment system. In this study, the analytic hierarchy process (AHP) is performed considering the characteristics of urban areas and the importance of each indicator is quantified. As a result, we can support reasonable design capacity optimization using the feasibility assessment system.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.26 no.2
• /
• pp.54-61
• /
• 1998

The subsurface environment of the root zone area can set the stae for "do or die" of the turfgrass plant. The good condition of the greens is verified by their physical properties. Therefore, this study was carried to evaluate on the existing green of Hwasan C.C. by undisturbed soil Core Anaysis. We completed the ISTRC SYSTEM BenchMarking of the undisturbed core samples taken from Green #1, Green #5, Green #9-"Best" area, and Green #9-"Stressed" area for the Hwasan C.C.. It was also our understanding that the greens were in "good" to "very good" conditioni. THe exception might be Green #9-"Stress" area, which was the stressed area. The stressed area was confined to a ridge across Green #9. The organic content test results comfirmed the development of organic layering in depth 0-2.5cm. For the amount of compaction in the upper root zones and te development of the green's respective organic layers, the infiltration rates were high in Green #1, Green #5, and Green #9 "Stressed" area. The depicted aerificaton hole might be the probable cause of the relatively high infiltraton rate. Green #9-"Best" area had a tested infiltration rate of 18.75cm/hr. Either this area had not been aerified, or the undisturbed sample did not contain a aerification cavity. The water retention capacity of the undisturbed samples was good. When the greens were first constructed, the original root zone mix had been relatively low water retention properties. And the bulk density and the porosity of the undisturbed samples were good. In the result, all the greens were similar except for the infiltration. Thus, we supposed that Green #9-"Stressed" area might be ainly influenced by the amount of irrigation water and the configuration of the green's surface. There had been a reduction in the amount of irrigation water as the water retention capacity in the greens was promoted. Especially, it had gradually become more of a problem as the green had matured in Green #9-"Stressed" area. Because Green #9-"Stressed" area was a ridge area. The reduction in the amount of irrigation water might be the probable cause of the stress in Green #9-"Stressed" area. Our final observation related to the soil texture and the particle size distribution of the sand. Though and sand contant of all the tested greens were good, the gravel content of them exceeded ISTRC Guidelines. In particle size distribution of the sand, the very coarse and the coarse content of all the tested greens exceeded, but the rest was insufficient. The stability is a function of the material retained on the 0.25mm mesh screen. But, the content of all the tested greens was very insufficient. Though all the greens was serviceable, the coarse root zone sands, such as the sand in the tested greens, tended to be "unstable". Thus, we recommend using a topdressing/aerification sand which should be more in line with ISTRC/USGA Guidelines.;unstable". Thus, we recommend using a topdressing/aerification sand which should be more in line with ISTRC/USGA Guidelines.ines.

• Korean Journal of Poultry Science
• /
• v.44 no.1
• /
• pp.41-49
• /
• 2017

This study was conducted to identify the quality and functional properties of meat and meat batter among commercial broilers and two different ages of spent layers. Breast and whole leg meat samples were prepared from the broilers and spent layers to compare meat quality traits: Commercial broiler (Arbor Acre; 6-week-old) and two different ages of spent layers (Hy-Line; 70 and 95-week-old). Three types of meat batters containing breast meat as 50% of total ingredients were also prepared to analyze processing qualities. The broiler showed the highest water holding capacity (p<0.05) and the lowest cooking loss value (p<0.05) in both meat and meat batter samples. The breast and leg meat of the 95-week-old layers showed the highest shear force value (p<0.05), and also showed the highest shear force and hardness values in the meat batter. Although the oldest layer meat showed tougher textural traits than the 70-week-old layers, no significant differences were found for cooking loss and water loss values in both the meat and meat batter samples. Besides, panelists gave equivalent scores within different ages and parts of the cooked layer meats in the sensory evaluation. Similar ratios of polyunsaturated fatty acids to saturated fatty acids, and omega-6 to omega-3 fatty acids were obtained from both the 70-week-old layer and 95-week-old layer meats. In conclusion, the 95-week-old spent layers, especially for breast meat, had equivalent potential as raw materials for processed meat products compared to the 70-week-old layers.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.8
• /
• pp.3781-3789
• /
• 2012

Background: Pancreatic cancer is one of the most aggressive tumors with a dismal prognosis. The membrane cytoskeletal crosslinker Ezrin participates in several functions including cell proliferation, adhesion, motility and survival. There is increasing evidence that Ezrin is overexpressed in vast majority of malignant tumors and regulates tumor progression. However, its roles in pancreatic cancer remain elusive. Methods: Three pairs of specific Ezrin siRNAs were designed and synthetized and screened to determine the most efficient one for construction of a hairpin RNA plasmid targeting Ezrin. After transfection into the Panc-1 pancreatic cancer cell line, real-time quantitative PCR and Western blotting were performed to examine the expression of mRNA and protein. The MTT method was applied to examine the proliferation and the drug sensibility to Gemcitabine. Flow cytometry was used to assess the cycle and apoptosis, while capacity for invasion was determined with transwell chambers. Furthermore, we detected phosphorylated-Erk1/2 protein and phosphorylated-Akt protein by Western blotting. Results: Real-time quantitative PCR and Western blotting revealed that Ezrin expression was notably down-regulated at both mRNA and protein levels by RNA interference (P< 0.01). Proliferation was inhibited and drug resistance to gemcitabine was improved (P< 0.05). Flow cytometry showed that the proportion of cells in the G1/G0 phase increased (P< 0.01), and in G2/M and S phases decreased (P< 0.05), with no apparent differences in apoptosis (P> 0.05). The capacity for invasion was markedly reduced (P< 0.01). In addition, down-regulating Ezrin expression had no effect on phosphorylated-Akt protein (P>0.05), but could decrease the level of phosphorylated-Erk1/2 protein (P< 0.05). Conclusions: RNA interference of Ezrin could inhibit its expression in the pancreatic cancer cells line Panc-1, leading to a potent suppression of malignant behavior in vitro. Assessment of potential as a target for pancreatic cancer treatment is clearly warranted.

• Journal of Information Management
• /
• v.22 no.1
• /
• pp.21-38
• /
• 1991

Optical laser discs are expected with it's roles as a new media to manage vast materials. Optical disc, optical videodisc, CD-ROM began to emerge from laboratories in the early seventies. By the passage of time, each of optical disc became to take particular significances to libraries. Also, each of optical discs were developed and disseminated with different objectives each other in information market. Recently, the storage capacity of CD-ROM disc began to lead to extensive consumer in on-line database market, and became an economic reality, because it's storage capacity is considerable over 600MB on a 12cm disc and it's system could be built in rather with cheap equipment. In my article, the optical disc retrieval system in libraries was investigated among various features in each kinds of libraries historically. And many efforts were attempted to present the possibilities which can apply on optical disc system. I relized that CD-ROM could be utilized at cataloging service and bibliographic database than other technical service. At the same time, I recognized that optical disc system could be used to retrieve all kinds of graphic information and digital data with retrieval system development. Therefore the tendancy of information management in future will be foreward to the way which apply optical discs on base of on-line and include all of graphic and digital database by using the developed retrieval software.

• Journal of the Korean Magnetics Society
• /
• v.25 no.3
• /
• pp.92-100
• /
• 2015

Electric Vehicle (EV) can be categorized by the driving method into in-wheel and in-line types. In-wheel type EV does not have transmission shaft, differential gear and other parts that are used in conventional cars, which simplifies and lightens the structure resulting in higher efficiency. In this paper, design method for in-wheel motor for automobiles using Parameter Map is proposed, and motor with continuous power of 5 kW is designed, built and its performance is verified. To decide the capacity of the in-wheel motor that meets the automobile's requirement, Vehicle Dynamic Simulation considering the total mass of vehicle, gear efficiency, effective radius of tire, slope ratio and others is performed. Through this step, the motor's capacity is decided and initial design to determine the motor shape and size is performed. Next, the motor parameters that meet the requirement is determined using parametric design that uses parametric map. After the motor parameters are decided using parametric map, optimal design to improve THD of back EMF, cogging torque, torque ripple and other factors is performed. The final design was built, and performance analysis and verification of the proposed method is conducted by performing load test.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3462-3468
• /
• 2015

Regarding countless network disorders or invasions happening nowadays from 2014 until 2015, illegal access intended to attack through the communication line provided by ISP (Internet Service Provider) appears to be the source of the problem. As a defensive way to prevent such network-based attacks, not only stabilization structures for network communication but various policies as well as physical security devices and solutions corresponding to those have been realized and established. Therefore, now is the time to gain foundational research data to secure network security sections by producing logical area on communication bandwidth or such, suggest tasks to expand the communication line which is another research topic in the network security market, and recognize the fact that the active communication bandwidth linkage paradigm using network communication bandwidth is needed as one of the areas that can realize physical security. Additionally, it is necessary to limit the data in the forms of organizing visible security structures into a certain range of physical information by re-dividing communication capacity being currently provided by telecommunicators into subdivided organizational areas and applying the logical virtualization of communication capacity in each of the areas divided. By proposing a network security section based on a logical field application in place of the existing physical structure, basic data that designs a stable physical network communication structure will be provided.