• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1841-1843
• /
• 1996

To meet recent increasing demand for electric power in large cities in Korea, and to improve reliability of the power supply. Especially, demand for electric power apparatus places great emphasis on not only function but also environmental factors. In this paper, environpolitics describes according to large capacity demand for extra high voltage underground transmission lines and high reliability of the power supply.

• Proceedings of the KIEE Conference
• /
• 2004.11d
• /
• pp.83-88
• /
• 2004

As the electric system is getting larger to meet the increasing demand for electric power, the rating of power apparatus is becoming inevitably higher in its working voltage and larger in its capacity. According to KEPCO reports, power transformers in the KEPCO system have undergone troubles such as winding short insulation breakdowns every year since 1981. the cause of this troubles were high one line grounding fault currents in KEPCO systems that had direct grounding systems. KEPCO has installed the NGR(neutral grounding reactor) to lower this fault current and reduced winding short insulation breakdowns in power transformers. But when a circuit breaker opened a no load bus, some trips of circuit breakers for protecting transformer have occurred by mal-operation of 59GT(overvoltage ground relay) that detect disconnection of NGR. Therefore, in this paper, we analyzed the cause and examined the effect of time delav circuit to prevent wrong operation of 59GT.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.630-633
• /
• 1997

This paper describes a design of a single phase PWM converter for high speed train. Parallel operation and control method of four Quadrant PWM converters are described. Simulation and modelling of the converters is performed. Capacity of the converter/inverter and power circuit for high speed traction system designed. And harmonic contents of AC line current's are analyzed. The results of the simulation are presented.

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.8
• /
• pp.863-869
• /
• 2006

A new CVT, the inner spherical traction CVT (ISCVT) is introduced. Transmission of the most scooters is the self-controlled variable pulley-belt type of CVT having some disadvantages in the fuel consumption and the limitation of the transmittable power due to the slippage between the belt and pulley. Unlike this, ISCVT controlled directly by driver is more efficient and the contact mechanism having the same line of contact normal of the spherical rotors of different radii on common center causes that the power density and torque capacity are remarkably improved. The prototype with the specifications of 50cc scooter is designed and tested.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1990.04a
• /
• pp.186-194
• /
• 1990

Just-In-Time production is to keep the kanban system. When production managers implement and operate successfully the system in the multi-Line, multi-stage production setting, it is very important to determine the number of kanbans in deterministic kanban system under consideration with relevant factors as well as with cost. In concrete, we discuss about following factors in kanban system and provide a model formulating the multi-objective goal programming : Demand, stock on hand in process, Inventory cost and Labor cost, Vendor's suppling capacity, Work Load. Finally we analyze several numerical examples in order to test the model and attempt to expand the model in general case.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1727-1729
• /
• 2002

To cope with increasing of electric power demand in metropolitan areas, large capacity underground power cables are needed. Under such situations, our company has developed 345kV XLPE insulated cable and accessories. As the final step of development of the 345kV XLPE cable and accessories, the pre-qualification test was carried out on the test line composed of cables, pre-fabricated joints, EB-Gs and EB-As. This paper sums up the pre-qualification test conditions and the results.

• Proceedings of the KIEE Conference
• /
• 2002.11d
• /
• pp.375-377
• /
• 2002

본 논문은 경부선 서울$\sim$시흥구간의 선로용량 향상을 위하여 경부고속철도에서 적용된(1)(2)(3)(5)(6) 방법으로 신호체계 및 폐색구간을 재설정 하였다. 경부선 서울$\sim$시흥 구간 현재의 데이터와 새로이 설정된 데이터를 시뮬레이션 한 결과 운전시격이 상선의 경우 현재 238초에서 192초로 하선의 경우 226초에서 179초로 향상되어 선로용량이 하선 약 23.9%, 상선 약 26.2%가 향상됨을 보였다.

• 한국연소학회:학술대회논문집
• /
• 2002.11a
• /
• pp.215-222
• /
• 2002

It has been well acknowledged that intake system plays great role in the performance of reciprocating engine. Well-designed intake system is expected to not only increase engine efficiency but also decrease engine emission, which is one of the most urgent issues in the automotive society. Thorough understanding of the flow in intake system helps great to design adequate intake system. Even though both experimental and numerical methods are used to study intake flow, numerical analysis is more widely used due to its merits in time and economy. Intake system of In-line 6-Cylinder CNG engine was chosen for the analysis ICEM CFD HEXA was used to create 3-D structured grid and FIRE code was used for the flow analysis in the intake system. Due to the complexity of the geometry standard ${\kappa}-{\varepsilon}$ turbulence model was applied. Numerical analysis was performed for various inlet and outlet boundary conditions under both steady and transient flow. Inlet mass flow rate and outlet pressure variation were changing parameters with respect to engine speed. Flow parameters, such as velocity, pressure and flow distribution, were evaluated to provide adequate data of this intake system.

• International Journal of Automotive Technology
• /
• v.5 no.1
• /
• pp.1-7
• /
• 2004

In line with the Super Ultra Low Emission Vehicle (SULEV) regulation, the main idea in this study has been focused on the utilization of hydrocarbon adsorber (HCA) to adsorb the excess hydrocarbons emitted during a period of engine cold-start, As main recipes of HCA materials, many types of zeolite as well as the combination of alumina and precious metals were used, Representative physico-chemical factors of zeolite such as acidic and hydrophobic properties were characterized. The optimum recipe of HCA materials was also determined. Among the acid properties of zeolites, the Si/Al ratio was found to be the most important factor to get higher hydrocarbon adsorption capacity.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.485-490
• /
• 2004

Airborne laser mapping is the latest and fastest method for generating 3D data. By now, elevation data was mainly acquired using air photos. But this way takes long time from land control surveying to digital visualization. Airborne laser mapping does not need any ground control after system calibration. In this paper, power line and electric tower areas were measured. And using the 3D laser result and digital camera images, contour lines and mosaic images was generated and the accuracy was presented. Airborne laser mapping and digital camera have a full capacity to substitute existing methods for electric and landscape works.