• 전기학회논문지
• /
• 제56권6호
• /
• pp.1031-1034
• /
• 2007

Electric transmission lines pass through a variety of area. Foundation supporting the conductors and tower are selected properly in accordance with external load, for example dead load, wind load, snow load, construction load etc, and topography and geology condition. Typical types of foundation are as follows: pad foundation for small load and hard soil or rock in mountainous area, pile foundation for medium or large load and soft soil in plain field area. This paper introduced cylindrical foundation design & construction for large load and mountainous area. This foundation failure mode against pulling-out show splitting failure by tensile force toward circumferential direction.

• 한국잠사학회:학술대회논문집
• /
• 한국잠사학회 2003년도 International Symposium of Silkworm/Insect Biotechnology and Annual Meeting of Korea Society of Sericultural Science
• /
• pp.147-148
• /
• 2003

The purpose of this experiment is to confirm whether the recombinant tumstatin revealed from the stably transformed Drosophila melanogaster S2 cells has in vitro capacity. Materials and Methods : Materials - Cell line : Drosophila melanogaster Schneider 2 (S2) cells - vector pMT/BiP/V5-His and pCoHygro (Invitrogen) (omitted)

• 복식문화연구
• /
• 제8권3호
• /
• pp.422-435
• /
• 2000

In this study female college students having high interest in fashion were selected by homogeneous purposive sampling. The students were classified into two groups. 301 Students living in Chinju were asked on self-actualization and design preference. The date of respondents were analyzed by Pearson's correlation coefficients and t-test. The results of this study can be summarized as follows. 1. The line preference, chroma, thickness and weight of clothing textile were different in these two groups. 2. The students of individuality had self-actualization, feeling reactivity, self-regard, existentiality and capacity of intimate contact. 3. There were significant relation between self-actualization and the preference for clothing form, color and texture in two groups.

• 한국지반공학회논문집
• /
• 제17권1호
• /
• pp.25-34
• /
• 2001

송전철탑의 기초로써 락앵커는 바람에 의해 반복적인 하중을 받고 있다. 반복하중은 락앵커의 인발 지지력 감소와 누적변위의 증가를 유발할 수 있다. 그러므로 송전철탑의 락앵커 설계시 세심한 주의가 요구된다. 본 논문에서는 세 가지 암반형태에 시공된 모형 락앵커에 대하여 반복하중 시험을 수행한 결과들을 제시하였다. 시험결과에 의하면 정적 극한하중의 50%보다 작은 최대 반복하중(Q$_{max}$)이 락앵커에 작용할 경우, 락앵커의 지지력에 대하여 반복하중의 영향이 없다. 최대 반복하중이 정적 극한하중의 50%에서 75%로 작용할 경우 누적변위의 증가를 유발하고, 정적 극한하중의 75%이상인 경우 락앵커의 지지력에 심각한 영향을 미친다. 따라서 정적 극한하중의 50% 이상의 반복하중을 받는 락앵커는 불안정하다.

• 한국지능정보시스템학회:학술대회논문집
• /
• 한국지능정보시스템학회 2001년도 The Pacific Aisan Confrence On Intelligent Systems 2001
• /
• pp.198-201
• /
• 2001

Recently the wireless-internet has been spreading extensively. People are spending a large part of their time gaining access to information using a mobile device. With the rapid growth of on-line Electronic Commerce, the use of mobile devices creates a new paradigm that provides users with location-independent real time service. Although this new paradigm does have some advantages, limited process speed, low bandwidth, the low battery capacity of mobile devices, and a high rate of wireless network errors causes many overhead expenses during service time with the server. In this paper, we suggest an autonomous service delivery system, which provides mobile agent capability to users that cannot maintain a connection. We have developed the system based on java mobile agent technology. Using this system, we can provide more effective service to users when the user is sending requirements for service through a mobile device that has limited resources. Furthermore we can manage the contact server dynamically when new services are added.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.354-357
• /
• 1991

In the case of system operation, a line overload cause damage to spread an whole range of power system. Of the theorems on load shedding, this study applied power distribution theorem and load reduction theorem which are local load shedding method, which are not affected by the magnitude of the power system and need not a large memory capacity and computation time. In this paper, we treat the problem of overload when power system occurred to fatal fault. Especially, there is the special case that local load shedding theorem is not always solved. Therefore, we introduce a solved device of the problem and construct the expert system of expanded local load shedding. Because proposed method uses the merits of expert system, in the case of system operation, the system operator don't embarrass to fatal fault and promptly deals with.

• 대한정형도수물리치료학회지
• /
• 제1권1호
• /
• pp.65-74
• /
• 1995

There is no line of demarcation between the shoulder and elbow regions. Pain In the arm may originate at the shoulder with reference downwards or less often at the elbow with reference upwards. Most pains indicated by the patient at the elbow or forearm have a local origin, since at the more distal part of the upper limb the capacity for correct localization is good. Once it is clear that the elbow region is at fault, the joint and the muscles about it are tested by ten movements. 1. Four. Passive extension, flexion, pronation, supination-full range, LOM, painful, painless. 2. Four. Resisted extension, flexion, pronation, supination-strong, weak, painful, painless. 3. Two. Resisted flexion, extension at the wrist-painful, painless. The muscles that perform theses two movements arise from the humeral epicondyles and a lesion in either often causes pain felt at the elbow although the tissuse affected is not functionally a part of the elbow (i. e. Tennis elbow and Golfer's elbow).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.320-321
• /
• 2011

As the scale of industries expands, the facilities of the industrial customer become larger and more complex. When a fault occurs in the system, the circuit breakers play an important role in minimizing causalitites by quickly tripping the faulted line. Since the capacity of the receiving-end has increased in size, an examination is needed to be performed between the industrial customers and the conventional circuit breakers. The transient recovery voltage, which is the initial transient characteristics of the voltage across the breaker when tripped, is an important factor in determining the circuit breaker's performance. In this paper, a TRV analysis on the large-scale industrial customer is being performed utilizing PSCAD/EMTDC.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.828-829
• /
• 2011

This paper performs a comparison analysis of two types of HVDC system in Jeju power system. A traditional HVDC transmission system had been composed of line commutated converter based on thyristors and the development of semiconductors enables to apply voltage source converter using IGBTs. The detailed parameters of Jeju power system were considered to make a similar condition with real system in real time digital simulator. Two types of HVDC transmission system were modeled and simulated to compare their characteristics in Jeju power system. The simulation results demonstrate that the VSC-HVDC system has more stable performance due to the fast response speed than LCC-HVDC when the transmission capacity was fluctuated.

• 한국경영과학회지
• /
• 제24권2호
• /
• pp.1-15
• /
• 1999

This research involves the development and evaluation of a work flow control model for a type of flexible manufacturing system(FMS) called a flexible flow line(FFL). The control model can be considered as a kind of hybrid intelligent model in that it utilizes both computer simulation and neural network technique. Training data sets were obtained using computer simulation of typical FFL states. And these data sets were used to train the neural network model. The model can easily incorporate particular aspects of a specific FFL such as limited buffer capacity and dispatching rules used. It also dynamically adapts to system uncertainty caused by such factors as machine breakdowns. Performance of the control model is shown to be superior to the random releasing method and the Minimal Part Set(MPS) heuristic in terms of machine utilization and work-in-process inventory level.