• Proceedings of the KSR Conference
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.219-222
• /
• 2007

The Full-Off Fitting of Movable Bracket using conventional line have received a dynamic contact impact between contact wire and pantograph of electric rolling stock, so this impact cause a rapid vibration of foreword and back near the supporting point of movable bracket. The Full-Off Fitting on Movable Bracket in conventional line differs from that in high speed line. Now conventional line have required a speed up for new electric locomotive and electric car. In speed-up track and big impact place, the Full-Off Fitting and the dropper often get demage. We have done a study of buffering function to solve that problem in conventional line. We have find a need adopting buffer fitting. It is decrease a dynamic impact between contact wire and pantograph of electric rolling stock.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.141-143
• /
• 2004

This paper represents 3D line segment extraction method, which can be used in generating 3D rooftop model. The core of our method is that 3D line segment is extracted by using line fitting of elevation data on 2D line coordinates of ortho-image. In order to use elevations in line fitting, the elevations should be reliable. To measure the reliability of elevation, in this paper, we employed the concept of self-consistency. We carry out the experiment of 3D line extraction using synthetic images generated from Avenches data set of Ascona aerial images.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• 제54권3호
• /
• pp.174-179
• /
• 2005

This paper presents 3D line segment extraction method, which can be used in generating 3D rooftop model. The core of our method is that 3D line segment is extracted by using line fitting of elevation data on 2D line coordinates of ortho-image. In order to use elevations in line fitting, the elevations should be reliable. To measure the reliability of elevation, in this paper, we employ the concept of self-consistency. We test the effectiveness of the proposed method with a quantitative accuracy analysis using synthetic images generated from Avenches data set of Ascona aerial images. Experimental results indicate that the proposed method shows average 30 line errors of .16 - .30 meters, which are about $10\%$ of the conventional area-based method.

• Journal of IKEEE
• /
• 제13권2호
• /
• pp.181-185
• /
• 2009

In this paper, we are concerned with a 3D line segment extraction method by area-based stereo matching technique. The main idea is based on line fitting of elevation data on 2D line coordinates of ortho-image. Elevation data and ortho-image can be obtained by well-known area-based stereo matching technique. In order to use elevation in line fitting, the elevation itself should be reliable. To measure the reliability of elevation, in this paper, we employ the concept of self-consistency. We test the effectiveness of the proposed method with a quantitative accuracy analysis using synthetic images generated from Avenches data set of Ascona aerial images. Experimental results indicate that our method generates 3D line segments almost 7.5 times more accurate than raw elevations obtained by area-based method.

• Journal of the Korea Institute of Military Science and Technology
• /
• 제9권2호
• /
• pp.20-25
• /
• 2006

Low frequency towed line array with high array gain and beam resolution is a long range surveillance sensor for anti-submarine warfare. The beam characteristics is however deteriorated due to the distorted line array sensor caused by low towing speed, wind, current, and towing ship maneuvering. An adaptive beamforming method is utilized in this paper to enhance the distorted line array beam performance by estimating and compensating the nonlinear array shape. A polynomial curve fitting in the least square sense is used to estimate the array shape iteratively with the distributed heading sensors data along the array. Real time array shape estimation and nonlinear array beam calculation is applied to a very long towed line array sensor system and the beam performance is evaluated and compared to the linear beamformer for the simulation and sea trial data.

• Journal of the Korean Society of Clothing and Textiles
• /
• 제17권3호
• /
• pp.459-469
• /
• 1993

The purpose of this study is to investigate the relationship between body-types and skirt-patterns by analyzing various fitting conditions of the skirt patterns in relation to the body-types. To achieve this, fitting tests were done on six types of skirt-patterns. The tests included four body-types selected according to the existing classification of the types of under part of the body. Sensory tests were performed on the existing patterns and new drafting method based on the results of the fitting tests. The results of the fitting tests and sensory test are as follows. 1. The existing skirt-patterns were relatively well-fitted except for certain parts in standard somatotype (body-type A). 2. The new drafting method, designed on the basis of the fitting test on the existing patterns, scored high on all of the eighteen items included in the test This signifies the excellence of the new drafting method. 3. In the case of the allocation between the front and the back, which is the difference between the educational patterns and industrial patterns, the best silhouette was achieved when the hip-line and the waist-line were same sized both in the back and in the front. However, in the case of body-type D it was better when there was a 1cm difference between the back and the front. 4. The number of darts that best fits young persons were found to be eight, to keep their side hip-curve smooth. Further, it is desirable to set the center line of the dart as the vertical waist-line. 5. The best length of the darts were determined to be 12.5cm, 11ch in the back, and 11cm, 9.5cm in the front. Adjustments would be made according to the differing body-types in the range of 0.5cm. 6. The lowerness of the back waist-line for the normal was determined at 1.5cm, with some variations in other body-types. 7. The front waist-line was needed to be 1cm lowered in the case of body-type B, whereas, in the case of body-type D, it was needed to be 1cm raised.

• The Research Journal of the Costume Culture
• /
• 제4권3호
• /
• pp.373-381
• /
• 1996

Draping design system organized by European about 13C has been developed greatly for a long while, but for the purpose of the practical use the Dress form similar to human body has been needed. In order to make three-dimensional effect as fitting Muslin ot the Dress form. the Basic lien has to be established in Muslin and Dress form each. At this time, Shoulder-blade level is indicated from various angles : measure down 10cm from the back neck point, a quarter of the back neck point to the waist lie, the half-way point between neckline and bust line, measure down 41 inches from the back neck line, measure down 3 inches from the top edge of the muslin at center back and cross mark for neck line, and so forth. This study established the Basic line through the two ways of them (B.N.P∼B.L/2, B.N.P∼W.L/4), did tight fitting to the 5 kinds of Dress forms which ar normal type in the drop value(the difference between hip circumference and bust circumference), and acquired Basic Pattern. After the experiment, fitness are throughly investigate by statistical analysis of measurements. As a result, this study finds out that fit is proper when shoulder blade level is situated on a fourth of the back neck point to the waist line and a quarter point between back neck point and waist line, and waist dart is situated on the back center line and princess line.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• 제45권12호
• /
• pp.146-151
• /
• 2008

The equivalent circuits of Open End and Step discontinuity effects for Suspended Strip line are obtained. The circuit parameters for each discontinuity effect are represented by equations after optimization based on EM analysis results, and the coefficients of the equations are obtained by curve fitting for all impedance cases.

• Proceedings of the IEEK Conference
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.905-906
• /
• 2008

This paper presents a method where the best focues points are calculated using line fitting. Two datasets are selected for each pixel based on the maximum value which is calculated using Laplacian operator. Then linear regression model is used to find lines that approximate these datasets. The best fit lines are found using least squares method. After approximating the two lines, their intersection point is calculated and weights are assigned to calculate the new value for the depth map.

• Proceedings of the IEEK Conference
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.999-1000
• /
• 2008

Image Registration is used many works in image processing widely. But It is difficult to find the accuracy informations such as translation, rotation, and scaling between images. This paper proposes an algorithm that Fourier based image registration using the pyramid edge detection and line fitting. It can be estimated the informations by each sub-pixels. The proposed algorithm can be used for image registrations which high efficiency is required such as GIS, or MRI, CT, image mosaicing, weather forecasting, etc.