• 대한전기학회논문지
• /
• 제43권4호
• /
• pp.586-593
• /
• 1994

This paper suggests the algorithm for on-line efficiency control of permancent magnet synchronous motors driving the electric vehicles. The existance of unigue d-axis current is verified, which generates the maximum efficiency at operating points of motor. Using the Fibonacci search method, d-axis current converges to the minimization of inverter input power, and to prevent the variation of motor speed in process of the efficiency control, the voltage decoupled control strategy is introduced. Through the experiments, the effects of an efficiency control algorithm are verified.

• 전력전자학회논문지
• /
• 제24권4호
• /
• pp.237-243
• /
• 2019

A high-efficiency and small-sized switched-mode line transformer (SMLT) is proposed in this study. The conventional structure of an adapter is composed of line transformer and rectifiers. This structure has a limit in miniaturizing due to low-frequency line transformer. Another structure is composed of power factor correction (PFC) and DC/DC converter. This structure has a limit in reducing volume due to two-stage structure. As the proposed SMLT is composed of an LLC resonant converter, a high-frequency transformer can be adopted to achieve isolation standards and size reduction. This proposed structure has different operation modes in accordance with line input voltage to overcome poor line regulation. In addition, the proposed SMLT is applied to the front of a conventional PFC converter, because the SMLT output voltage is restored to rectified sinusoidal wave by using a full-bridge rectifier in the secondary side. The design of the PFC converter is easy, because the SMLT output voltage is controlled as rectified sinusoidal wave. The validity of the proposed converter is proven through a 350 W prototype.

• 산업경영시스템학회지
• /
• 제5권6호
• /
• pp.1-6
• /
• 1982

The objective of this thesis to Provide a better insight into the effect of the amount of in-process storage has on the efficiency of production line with variable operation times. It is assumed that the material enters the line at the first work station and is then processed progressively through the line until it exits at the last work station, a finite amount of in-process storage is provided before all but the first work station of the line and the operation time of the work stations are statistically independent and follow exponential distribution. Under the above assumption, optimum allocation model is developed and following two approaches are used : 1) Given the available storage capacity, optimum allocation which minimizes the number of items in the line. 2) Given the available storage capacity, optimum allocation which. maximizes the utilization factor of the line. In a balanced three stage line, the production line efficiency is maximized under both categories when the second in-process storage is larger than the first.

• 수산해양기술연구
• /
• 제13권2호
• /
• pp.15-20
• /
• 1977

Fishing efficiency of conventional bamboo traps and other traps for eel Conger myriaster, was investigated. The results are as follows: ). The best fishing efficiency was observed when the trap is inclined to the sea bottom with 20 ~ 30 degrees. 2. Plastic traps were better compared with bamboo traps in rigidity and fishing efficiency. 3. Using clips in attaching branch line to main line, the operating time was saved somewhat considerably.

• 한국정보전자통신기술학회논문지
• /
• 제2권4호
• /
• pp.13-18
• /
• 2009

본 연구는 DGS 결합 구조를 이용하여 고조파 억압 특성을 향상시키기 위하여 전력증폭기의 효율을 높이기 위한 방법을 제안하였다. 고조파 성분과 연관된 효율성은 전력 증폭기를 설계하는데 있어서의 중요한 요인 중의 하나이다. 그러므로 주기적인 슬릿이나 스터브를 갖는 DGS 전송선로를 전력 증폭기의 후단에 먼저 설계하고 결합함으로써 고조파의 효과적인 억압 특성을 가지며 효율을 높힐 수 있게 됨을 알 수가 있었다. 따라서 보 연구에서는 WCDMA용 전력 증폭기에 적용한 결과 효율성을 위한 측정 실험에 있어서 을 한 결과 PAE 보다 6%의 효율 향상을 얻을 수가 있었음을 보여주었다.

• 한국수소및신에너지학회논문집
• /
• 제27권2호
• /
• pp.211-219
• /
• 2016

To develop an ash separator for the solid fuel chemical looping combustion system, effects of operating variables such as solid injection nozzle velocity, diameter of solid injection nozzle, gap between solid injection line and vent line, vent line inside diameter, and solid intake height on solid separation rate and solid separation efficiency were measured and discussed using heavy and coarse particle and light and fine particles mixture as bed material in an acrylic fluidized bed apparatus. The solid separation rate increased as the solid injection nozzle velocity and the diameter of solid injection nozzle increased. However, the solid separation rate decreased as the gap between solid injection line and vent line, the vent line inside diameter, and the solid intake height increased. The solid separation efficiency was in inverse proportion to the solid separation rate. In this study, we could get high solid separation rate up to 2.39 kg/hr with 91.6% of solid separation efficiency.

• 한국정밀공학회지
• /
• 제18권8호
• /
• pp.129-138
• /
• 2001

The paper presents an implementation procedure of assembly line for ABS motor, which is composed of four subassemblies-yoke, grommet, housing and armature. The characteristics of ABS motor and its assembly processes are analysed, and the automation possibility of each process is examined in order to decrease assembly time. The assembly machines and facilities are then selected for automatic assembly, and the layout of the selected facilities is determined. Finally, task allocation of each worker is achieved by assembly line balancing to increase assembly productivity and efficiency. The line efficiency is also analyzed using simulation.

• Journal of Information Display
• /
• 제5권4호
• /
• pp.7-11
• /
• 2004

Effects of base vacuum level on the electrical and optical characteristics of the plasma display panel (PDP) were investigated. The relationship between efficiency and base vacuum level before filling discharge gas was analyzed. For the base vacuum level of $1{\times}10^{-4}$ torr, firing voltage of a 2-inch diagonal PDP panel was 232 V at the discharge gas pressure of 400 torr and luminous efficiency was 1.5 lm/W at 180V sustaining pulse. On the other hand for $1{\times}10^{-6}$torr, the firing voltage was reduced to 215 V and luminous efficiency was improved considerably to 2.5 lm/W. We successfully demonstrated the smooth operation of tip-less PDP fabricated using vacuum in-line sealing method.

• Journal of Power Electronics
• /
• 제14권5호
• /
• pp.842-851
• /
• 2014

High efficiency standards are slowly being introduced with IE3 efficiency levels shortly becoming compulsory in many countries; IE4 efficiency levels being developed for future implementation. In this paper a review is carried out of the IE 60034-30 standard which covers standard line-start induction motors. Some design techniques that can be used to increase efficiency in order to meet the IE4 standards are discussed. This standard is now being replaced by the IE60034-30-1 standard which extends to other line start motors and also IE 60034-30-2 is being introduced to cover variable speed drives in order to address developing technology. The conclusion is that IE4 standards are obtainable but careful design is needed to reach this. Examples from the literature are given.

• International Journal of Fluid Machinery and Systems
• /
• 제2권1호
• /
• pp.1-12
• /
• 2009

Surrogate modeling is applied to a compressor blade shape optimization to modify its stacking line and thickness to enhance adiabatic efficiency and total pressure ratio. Six design variables are defined by parametric curves and three objectives; efficiency, total pressure and a combined objective of efficiency and total pressure are considered to enhance the performance of compressor blade. Latin hypercube sampling of design of experiments is used to generate 55 designs within design space constituted by the lower and upper limits of variables. Optimum designs are found by formulating a PRESS (predicted error sum of squares) based averaging (PBA) surrogate model with the help of a gradient based optimization algorithm. The optimum designs using the current variables show that, to optimize the performance of turbomachinery blade, the adiabatic efficiency objective is improved substantially while total pressure ratio objective is increased a very small amount. The multi-objective optimization shows that the efficiency can be increased with the less compensation of total pressure reduction or both objectives can be increased simultaneously.