• Journal of Power Electronics
• /
• 제18권4호
• /
• pp.1190-1200
• /
• 2018

A current sourced bi-directional wireless power transfer (WPT) system is proposed to solve the problems that exist in the bi-directional WPT for vehicle-to-grid (V2G) systems. These problems include the fact that these systems are not safe enough, the output power is limited and the control methods are complicated. Firstly, the proposed system adopts two different compensation and control methods on both the primary and secondary sides. Secondly, based on an AC impedance analysis, the working principle is analyzed and the parameter configuration method with frequency stability is given. In order to output a constant voltage, a bi-directional DC/DC circuit and a controllable rectifier bridge are adopted, which are based on the "constant primary current, constant secondary voltage" control strategy. Finally, the effectiveness and feasibility of the proposed methods are verified by experimental results.

• KSTLE International Journal
• /
• 제2권1호
• /
• pp.46-54
• /
• 2001

The herringbone groove journal bearing (HGJB) has chevron type grooves on stationary or rotating member of the bearing so that they pump the lubricant inward the grooves when journal rotates. As a result, the pressure is generated around the journal so that the radial stiffness and dynamic stability are improved comparing to the plain journal bearing (PJB) when the bearing operates near the concentric condition. The narrow groove theory, conventionally adopted to simulate the concentric operation of HGJB, is limited to the infinite number of grooves. A numerical study of air-lubricated HGJB is presented for the finite number of grooves. The compressible isothermal Reynolds equation is solved by using Finite Element Method together with the Newton-Raphson iterative procedure and perturbation method. The solutions render the static and dynamic performances of HGJB. Comparison of present results with a PJB validates previously published finite difference solution. The HGJB's geometric parameters influence its static and dynamic characteristics. The optimum geometric parameters are presented for the air-lubricated HGJB in particular conditions.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.985-994
• /
• 2004

The application of the reinforced retaining wall has increased in the last 10 years in Korea. The height of reinforced wall is generally limited to less than 15m. It has been reported that the reinforced wall higher than 10m should have higher strength reinforcement or should reduce the lateral earth pressure of the reinforced wall to secure the stability of the wall. In this study, the reinforced retaining wall was constructed 14m high, backfilled by a mixture of soil and cement and instrumented on the reinforcement elements. The instrumented reinforced wall was monitored during and after construction. Field monitoring result shows that a backfill by a mixture of soil and cement reduced the tensile stress developed on the reinforcing elements and the reinforced wall backfilled by a mixture of soil and cement performed successful.

• 대한족부족관절학회지
• /
• 제10권2호
• /
• pp.255-258
• /
• 2006

For the adequate intraarticular exposure in medial talar dome lesions, medial malleolar osteotomy is necessary in some cases. Many operative techniques including transverse, oblique, inverted V-shape, crescentic and step-cut osteotomies of the medial malleolus have been described previously. But their techniques have several problems such as nonunion, rotation and limited access to lesions. So we introduce the new reverse chevron medial malleolar osteotomy which provides excellent access to lesions, good stability and a broad cancellous surface for rapid healing.

• 한국레이저가공학회지
• /
• 제4권2호
• /
• pp.13-19
• /
• 2001

When a high-power laser beam is irradiated on the surface of material, it is well known that a cavity, called a keyhole induced by the pressure action of the vapor plume, is generated in the molten material. This paper describes the interaction between a pulsed CO$_2$ laser beam and water. The laser-beam is used to generate and maintain a conical depression in the water surface similar to the keyhole created during laser penetration welding. Experimental results show that the depth of laser-beam penetration is limited by hydrodynamic instability. The instability of the surface cavity can be understood by the capillary instability of a hollow jet. Theoretical computation of the steady keyhole shape has been performed. modifying the model suggested by Andrews et al. (1976). The model predicts the qualitative behavior of the keyhole but significantly underestimates the average diameter.

• 제어로봇시스템학회논문지
• /
• 제18권8호
• /
• pp.768-773
• /
• 2012

Packet loss compensation techniques are increasingly important to stable remote control over wireless communication in WNCS (Wireless Networked Control Systems). Its time varying channels, limited bandwidth, interference, and poor signal not only leads to packet loss or latency, but also can negatively affect performance and system stability. This paper presents a compensation technique exploiting an EWMA (Exponentially Weighed Moving Average)-based value estimator to clarify the influence of packet loss on the overall WNCS behavior. As an example of actuator to be remotely controlled, a rotary-type inverted pendulum has been considered, and modeled. Performance evaluation results through Matlab/Simulink and Truetime co-simulation confirm the superiority of the proposed value estimation method over previous approaches.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.183-185
• /
• 2004

Despite high cost, the underground power distribution system has been preferred by utilities and customers due to its stability and good living environment. Utilities, however, are burdened with the cost of installation as the service region of underground power system is getting enlarged. In this paper, a design method is proposed in order to reduce the construction cost of underground distribution system. That is an optimum algorithm, which can increase the total number of pipes in a limited space compared with a conventional design method. As a result, the proposed design method can reduce efficiently the construction cost of underground distribution system.

• 소음진동
• /
• 제9권2호
• /
• pp.387-392
• /
• 1999

This paper presents design guidelines for the automatic ball balancer in CD/DVD systems with varying eccentricity. In these systems, the size of balancing balls should be limited by the restricted race space so that determination of the number and mass of balls should consider the radii of the race and the balls. In addition, the effects of viscosity and friction also should be taken into account for sufficient balancing. Based on the static equilibrium conditions, the number and mass of balls corresponding to the range of varying eccentricity have been determined. Dynamic simulation with viscosity and friction shows sufficient viscosity must exist to ensure stability and friction between balls and race must be minimized to guarantee accurate balancing.

• International Journal of Advanced Culture Technology
• /
• 제6권4호
• /
• pp.214-225
• /
• 2018

Rice straw is the principal forage for Korean cattle. Limited supply of domestic forage forces Korea to depend on imported forage. Utilizing locally available domestic feed as an alternative would lead to self-sufficiency and stability in cattle farm management. Locally available feed can be utilized as forage. The challenge of collecting local feed has been overcome by machines that have been developed to harvest feed. Local feed can be completely consumed in the production regions, thus reducing transportation costs and increasing price competitiveness. Hitherto, studies have focused on feed technologies and price competitiveness, among other factors, while the substitution of forage has not been examined. This study conducts a quantitative analysis to estimate the extent to which local feed can replace existing forage. We find that local feed is cheaper, and abundantly available, and can thus replace high-quality forage.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 춘계학술대회
• /
• pp.893-895
• /
• 2014

무선통신기반 열차제어시스템의 국내 도입을 앞두고 철도전용 주파수 할당에 대한 사항이 활발히 논의되고 있다. 공공자원으로서 큰 가치를 지닌 주파수를 적절한 용도에 알맞은 양을 할당하는 것은 다른 분야와의 형평성과 한정된 자원의 유용한 사용 측면에 있어서도 중요한 문제이다. 본 논문에서는 무선통신기반 열차제어시스템에서 기존에 논의되던 서비스들을 LTE 기반의 철도통신망에 적용했을 때 안정적인 운용이 가능한지에 대하여 시뮬레이션을 통하여 알아보았다.