• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.4
• /
• pp.17-24
• /
• 2009

This paper deals with the cancellation performance of loop back interference signal in the case of multihop relay of 16-QAM received signal at the USN radio network. For this, it is necessary to the exchange of information with long distance located station by means of the relay function between the node in the USN environment. In the relay node, the loop-back interference signal which the retransmitting signal is feedback to the receiver side due to the antenna of transmitter and receiver are co-used or very colsely located or using the nonlinear device. Due to this signal, the performance of USN system are degraded which are using the limited resource of frequency and power. For improve this, it is necessary to applying the adaptive signal processing algorithm in order to cancellating the unwanted loop-back interference signal at the frontend of receiver in relaying node, we can get the better system and multi hop performance. In the adaptive signal processing, we considered the 16-QAM signal which has a good spectral efficiency, firstly, than, the QR-Array RLS algorithm was used that has a fairly good convergence property and the solving the finite length problem in the H/W implementation. Finaly, we confirmed that the good elimination performanc was confirmed by computer simulation in the learing cuved and received signal constellation compared to the conventional RLS.

• Journal of Navigation and Port Research
• /
• v.39 no.4
• /
• pp.293-297
• /
• 2015

Underwater acoustic communications has been limited use for military purposes in the past. However, the fields of underwater applications expend to detection, submarine and communication in recent. The excessive multipath encountered in underwater acoustic communication channel is creating inter symbol interference, which is limiting factor to achieve a high data rate and bit error rate performance. To improve the performance of a received signal in underwater communication, many researchers have been studied for channel coding scheme with excellent performance at low SNR. In this paper, we applied BCJR decoder based ( 2,1,7 ) convolution codes and to compensate for the distorted data induced by the multipath, we applying the turbo equalization method. Through the underwater experiment on the Gyeungcheun lake located in Mungyeng city, we confirmed that turbo equalization structure of BCJR has better performance than hard decision and soft decision of Viterbi decoding. We also confirmed that the error rate of decoder input is less than error rate of $10^{-1}$, all the data is decoded. We achieved sucess rate of 83% through the experiment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.2
• /
• pp.493-500
• /
• 2011

Recently, there has been an increase in the number of disaster victims locally due to climate change and a variety of frequently occurring natural disasters. The damage caused by abrupt weather change in local area by typical weather forecasting techniques is very limited and difficult. Recently local area weather monitoring system using wireless sensor network technology has been very actively studied. Thus an IEEE 802.15.4-based weather field server to measure and monitor the local weather changes was designed and developed in this study. The proposed weather field server utilizes a wireless sensor node and weather sensors to collect weather information such as temperature, humidity, illumination, dew point, barometric pressure, and water level. The integrated weather sensor board was designed to respond quickly to weather changes, and provide feedback to the server PC. Each weather information is analyzed in the server PC to establish a program to monitor and analyze the local area or the area of abrupt climate change in order to provide warning signals in case of disaster events in local.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.8A
• /
• pp.739-752
• /
• 2002

Recently, to utilize the limited bandwidth effectively, the concept of partial response (PR) signaling has widely been adopted in both the high-speed data transmission and high-density digital recording/playback systems such as digital microwave, digital subscriber loops, hard disk drives, digital VCR's and digital versatile recordable disks and so on. This paper is concerned with adaptive equalization of partial response channels particularly for the magnetic recording channels. Specifically we study how the PR channel equalizers work for different choices of desired or reference signals used for adjusting the equalizer weights. In doing so, we consider three different configurations that are actually implemented in the commercial products mentioned above. First of all, we show how to compute the theoretical values of the optimum Wiener solutions derived by minimizing the mean-squared error (MSE) at the equalizer output. Noting that this equalizer MSE measure cannot be used to fairly compare the three configurations, we propose to use the data MSE that is computer just before the final detector for the underlying PR system. We also express the data MSE in terms of the channel impulse response values, source data power and additive noise power, thereby making it possible to compare the performance of the configurations under study. The results of extensive computer simulation indicate that our theoretical derivation is correct with high precision. Comparing the three configurations, it also turns out that one of the three configurations needs to be further improved in performance although it has an apparent advantage over the others in terms of memory size when implemented using RAM's for the decision feedback part.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.7
• /
• pp.22-30
• /
• 2015

For long-term evolution (LTE) MIMO transmission, codebooks are used to utilize the estimated channel information under the limited feedeback environment, and related study has been actively performed. Existing codebooks include codevectos constructed based on vector quantization (VQ) and discrete Fourier transform (DFT), and the LTE standard specifies codebooks modified from these examples to support up to 8 transmit antennas. As the number of antennas increases and as the spatial channel model is used as a standard environment to evaluate the LTE transmission performance, new beamforming methods as well as codebook designs are needed. In this paper, we implement the 3-dimensional spatial channel model (3D-SCM) to analyze the key statistical characteristics of the generated channel, and present efficient ways of determining corresponding codebooks. In particular, we propose a nonuniform-phase DFT-based codebook to improve the existing uniform-phase DFT-based codebook, and evaluate its performance under the given SCM transmission environment. There exists a strong tendancy in statistical distributions of the phase difference between adjacent antenna elements for the SCM, which can be appropriately exploited in codebook design to produce a performance gain over the existing design.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.4
• /
• pp.451-458
• /
• 2021

Currently, digital technology is being used in various fields of dental treatment. In particular, in the case of anterior esthetic restoration, the traditional restoration method cannot contain facial information and it is difficult for the patient to predict the treatment result. However, in the case of esthetic restoration through digital design, the visualization of the prosthesis design and the ease of reflecting patient feedback, and expecting the treatment result is available. In this case, the patient confirmed the results of restoration treatment using a digital method before treatment and obtained consent for treatment in an anterior tooth trauma patient. In addition, since the conventional digital smile design method uses only the patient's facial and smile information, the design was made on a two-dimensional plane, and its application was somewhat limited. However, in this case, a three-dimensional virtual patient was created and thus the designed restoration was viewed from various angles. Through this case, it was possible to obtain a high degree of satisfaction with the ease of communication with the patient and the technician during the esthetic restoration using the digital method, the simplicity of the procedure, and the treatment result.

• Fire Science and Engineering
• /
• v.32 no.6
• /
• pp.117-125
• /
• 2018

This paper examined the problems concerning recognition of business selection and operation, etc. and the presentation of the corresponding improvement measures. For this purpose, according to the results of a questionnaire survey on recognition of detailed business operation of the fire safety shared tax, satisfaction in business execution, financial operation measures for the subject of fire fighters, fire fighters have been shown to be indifferent to the detailed business field of fire safety shared tax, investment contents, etc. in the operation of fire safety shared tax. In terms of satisfaction after execution of the shared tax, reduction of the aging rates for firefighting equipment and improvement of dissemination rate was shown to be high with Fire Sergeant (M = 3.70) and a service duration of more than 16 years (M=3.64). To improve the measures of finance, there was considerable feedback saying that the reduction in state subsidy was inappropriate. In view of the diversification and development of the fire safety shared tax businesses being operated on a limited basis along with the overlap of most state subsidy businesses with safety field businesses, legal system improvement is needed for the stable securing of insufficient firefighting financial resources so that the full amount of shared tax can be invested in firefighting fields.

• Journal of Animal Reproduction and Biotechnology
• /
• v.36 no.1
• /
• pp.9-16
• /
• 2021

Under the stressed condition, a complex feedback mechanism for stress is activated to maintain homeostasis of the body and secretes several stress hormones. But these stress hormones impair synthesis and secretion of the reproductive hormones, followed by suppression of ovarian function. Cytochrome P450 1A2 (CYP1A2) plays a major role in metabolizing exogenous substances and endogenous hormones, and its expression is recently identified at not only the liver but also several organs with respect to the pancreas, lung and ovary. Although the expression of CYP1A2 can be also affected by several factors, understanding for the changed pattern of the ovarian CYP1A2 expression upon stress induction is still limited. Therefore, CYP1A2 expression in the ovaries from immobilization stress-induced rats were assessed in the present study. The stress-induced rats in the present study exhibited the physiological changes in terms of increased stress hormone level and decreased body weight gains. Under immunohistological observation, the ovarian CYP1A2 expression in both control and the stressed ovary was localized in the antral to pre-ovulatory follicles. However, its expression level was significantly (p < 0.01) higher in the stress-induced group than control group. In addition, stress-induced group presented more abundant CYP1A2-positive follicles (%) than control group. Since expression of the ovarian CYP1A2 was highly related with follicle atresia, increased expression of CYP1A2 in the stressed ovary might be associated with changes of the ovarian follicular dynamics due to stress induction. We hope that these findings have important implications in the fields of the reproductive biology.

• Publications of The Korean Astronomical Society
• /
• v.35 no.3
• /
• pp.29-41
• /
• 2020

Korea has numerous astronomical resources, such as observational records, star maps, and a wealth of literature, covering the period from the Three Kingdoms (54 BC - 932 AD) to the Joseon Dynasty (1392 - 1910 AD). The research activities related to these resources have been limited to those by individual researchers. It is now necessary to conduct research by efficiently and systematically collecting and managing Korean astronomical records using an accessible Web environment. The purpose of this study is to complete a system that enables researchers systematically to collect and verify a large number of historical records related to astronomical phenomena in a Web environment. In 2017, a preliminary survey was conducted, and the requirements pertaining to an implementation target system were devised. In addition, a joint development plan was carried out by the developer, lasting three months in 2018. Although the system is relatively simple, it is the first system to be attempted in the historical astronomy field. In order to proceed with the systematic development, the software development methodology is applied to the entire process from deriving the requirements of researchers to completing the system. The completed system is verified through integrated function and performance tests. The functional test is repeated while modifying and testing the system based on various test scenarios. The performance test uses a performance measurement test tool that takes measurements by setting up a virtual operation environment. The developed system is now in normal operation after a one-year trial period. Researchers who become authorized to use the system can use it to verify the accuracy of data and to suggest improvements. The collected feedback will be reflected in future systems, and Korean astronomical records will be available for use internationally through a multilingual service.

• Journal of Korea Water Resources Association
• /
• v.55 no.spc1
• /
• pp.1177-1185
• /
• 2022

The water and sewage system is an infrastructure that provides safe and clean water to people. In particular, since the water and sewage pipelines are buried underground, it is very difficult to detect system defects. For this reason, the diagnosis of pipelines is limited to post-defect detection, such as system diagnosis based on the images taken after taking pictures and videos with cameras and drones inside the pipelines. Therefore, real-time detection technology of pipelines is required. Recently, pipeline diagnosis technology using advanced equipment and artificial intelligence techniques is being developed, but AI-based defect detection technology requires a variety of learning data because the types and numbers of defect data affect the detection performance. Therefore, in this study, various defect scenarios are implemented using 3D printing model to improve the detection performance when detecting defects in pipelines. Afterwards, the collected images are performed to pre-processing such as classification according to the degree of risk and labeling of objects, and real-time defect detection is performed. The proposed technique can provide real-time feedback in the pipeline defect detection process, and it would be minimizing the possibility of missing diagnoses and improve the existing water and sewerage pipe diagnosis processing capability.