• Journal of Climate Change Research
• /
• v.8 no.2
• /
• pp.125-143
• /
• 2017

This study is conducted to estimate potential evapotranspiration of 10 weather observing systems in Andong Dam watershed with FAO56 Penman-Monteith (FAO56 PM) methodology using the meteorological data from 2013 to 2014. Also, assuming that there is no solar radiation data, humidity data or wind speed data, the potential evapotranspiration was estimated by FAO56 PM and the results were evaluated to discuss whether the methodology is applicable when meteorological dataset is not available. Then, the potential evapotranspiration was estimated with Hargreaves method and compared with the potential evapotranspiration estimated by FAO56 PM only with the temperature dataset. As to compare the potential evapotranspiration estimated from the complete meteorological dataset and that estimated from limited dataset, statistical analysis was performed using the Root Mean Square Error (RMSE), the Mean Bias Error (MBE), the Mean Absolute Error (MAE) and the coefficient of determination ($R^2$). Also the Inverse Distance Weighted (IDW) method was performed to conduct spatial analysis. From the result, even when the meteorological data is limited, FAO56 PM showed relatively high accuracy in calculating potential evapotranspiration by estimating the meteorological data.

• Structural Engineering and Mechanics
• /
• v.56 no.2
• /
• pp.293-315
• /
• 2015

While most of researches on system identification of building structures are aimed at finding modal parameters first and identifying the corresponding physical parameters by using the transformation in terms of transfer functions and cross spectra, etc., direct physical parameter system identification methods have been proposed recently. Due to the problem of signal/noise (SN) ratios, the previous methods are restricted mostly to earthquake records or forced vibration data. In this paper, a theoretical investigation is performed on the influence of wind disturbances on stiffness identification of building structures using micro-tremor at limited floors. It is concluded that the influence of wind disturbances on stiffness identification of building structures using micro-tremor at limited floors is restricted in case of using time-series data for low-rise buildings and does not cause serious problems.

• International Journal of Advanced Culture Technology
• /
• v.11 no.1
• /
• pp.343-348
• /
• 2023

As the IoT market continues to grow, security threats to IoT devices with limited resources are also increasing. However, the application of security technology to the existing system to IoT devices with limited resources is impossible due to the inherent characteristics of IoT devices. Various methods for solving related problems have been studied in existing studies to solve this problem. Therefore, this study analyzes the characteristics of domestic IoT authentication standards and existing research to propose an algorithm that applies blockchain-based authentication and lightweight encryption algorithms to IoT equipment with limited resources. In this study, a key generation method was applied using a Lamport hash-chain and data integrity between IoT devices were provided using a Merkle Tree, and an LEA encryption algorithm was applied using confidentiality in data communication. In the experiment, it was verified that the efficiency is high when the LEA encryption algorithm, which is a lightweight encryption algorithm, is applied to IoT devices with limited resources.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.995-996
• /
• 2006

This paper presents a design of the PMOLED(Passive Matrix Organic light emitting diodes) driver IC improving the terminal current offset. The proposed methods are improving the design of the usual data output circuit. This methods can be avoidance brightness non-uniformity problem.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.11a
• /
• pp.56-56
• /
• 2004

• Smart Structures and Systems
• /
• v.32 no.4
• /
• pp.235-251
• /
• 2023

A method that can estimate global deformation and internal forces using a limited amount of displacement data and based on the shape superposition technique and a neural network has been recently developed. However, it is difficult to directly measure sufficient displacement data owing to the limitations of conventional displacement meters and the high cost of global navigation satellite systems (GNSS). Therefore, in this study, the previously developed estimation method was extended by combining displacement, slope, and strain to improve the estimation accuracy while reducing the need for high-cost GNSS. To validate the proposed model, the global deformation and internal forces of a cable-stayed bridge were estimated using limited multi-response data. The effect of multi-response data was analyzed, and the estimation performance of the extended method was verified by comparing its results with those of previous methods using a numerical model. The comparison results reveal that the extended method has better performance when estimating global responses than previous methods.

• Journal of information and communication convergence engineering
• /
• v.7 no.2
• /
• pp.152-156
• /
• 2009

This paper examines the BER performance of the recently proposed half-symbol-rate-carrier (HSRC) offset quadrature phase-shift-keying (OQPSK) receiver for high-speed data communication. A modified demodulation technique using a bit-time period signal integration, the bit-error-rate (BER) performance of the HSRC-OQPSK signal improves more than 4dB compared to that of a demodulation technique using a symbol-time period integration. This paper also examines the BER performance of modified demodulation with various band-limited channels modeled using low-pass filters, and the three different data-rate systems are simulated and compared with the performance of the system using the conventional demodulation technique.

• Journal of the Korean Data and Information Science Society
• /
• v.24 no.3
• /
• pp.445-451
• /
• 2013

We consider the estimators for the parameters of the exponential model with limited replacements under the type I censoring scheme. Also, we propose the desirable number of replacements to provide the similar effects in terms of the mean square errors.

• Atmosphere
• /
• v.25 no.1
• /
• pp.67-83
• /
• 2015

Predicting the location and intensity of precipitation still remains a main issue in numerical weather prediction (NWP). Resolution is a very important component of precipitation forecasts in NWP. Compared with a lower resolution model, a higher resolution model can predict small scale (i.e., storm scale) precipitation and depict convection structures more precisely. In addition, an ensemble technique can be used to improve the precipitation forecast because it can estimate uncertainties associated with forecasts. Therefore, NWP using both a higher resolution model and ensemble technique is expected to represent inherent uncertainties of convective scale motion better and lead to improved forecasts. In this study, the limited area ensemble prediction system for the convective-scale (i.e., high resolution) operational Unified Model (UM) in Korea Meteorological Administration (KMA) was developed and evaluated for the ensemble forecasts during August 2012. The model domain covers the limited area over the Korean Peninsula. The high resolution limited area ensemble prediction system developed showed good skill in predicting precipitation, wind, and temperature at the surface as well as meteorological variables at 500 and 850 hPa. To investigate which combination of horizontal resolution and ensemble member is most skillful, the system was run with three different horizontal resolutions (1.5, 2, and 3 km) and ensemble members (8, 12, and 16), and the forecasts from the experiments were evaluated. To assess the quantitative precipitation forecast (QPF) skill of the system, the precipitation forecasts for two heavy rainfall cases during the study period were analyzed using the Fractions Skill Score (FSS) and Probability Matching (PM) method. The PM method was effective in representing the intensity of precipitation and the FSS was effective in verifying the precipitation forecast for the high resolution limited area ensemble prediction system in KMA.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.5B
• /
• pp.310-317
• /
• 2008

Data collision in LR-WPAN(Low Rate Wireless Personal Area Network) causes retransmission of which energy consumption may reduce life of the entire network. Furthermore LR-WPAN is very sensitive to collision as it has relatively fewer frequencies of backoff retries. LCS(Limited Contention Scheme) suggested in this study is a way to transmit data by certain groups of the total nodes so that it can reduce possibilities of data collision and retransmission by decreasing the number of competing nodes. As a result LCS can increase a throughput and the life of the entire network. As using LCS in designing LR-WPAN in the future can extend battery life, LCS can be useful in any application that requires low energy consumption.