• Journal of Sensor Science and Technology
• /
• v.28 no.1
• /
• pp.47-51
• /
• 2019

Sweat-based glucose sensors are being widely investigated and researched as they facilitate painless and continuous measurement. However, because the concentration of sweat glucose is almost a hundred times lower than that of blood glucose, it is important to develop electrochemical sensing electrode materials that are highly sensitive to glucose molecules for the detection of low concentrations of glucose. The preparation of a flexible and ultra-sensitive sensor for detection of sweat glucose is presented in this study. Oxygen and nitrogen are removed from the surface of a polyimide film by exposure to a CO2 laser; hence, laser-induced graphene (LIG) is formed. The fabricated LIG electrode showed favorable properties of high roughness and good stability, flexibility, and conductivity. After the laser scanning, Pt nanoparticles (PtNP) with good catalytic behavior were electrodeposited and the glucose sensor thus developed, with a LIG/PtNP hybrid electrode, exhibited a high order of sensitivity and detection limit for sweat glucose.

• Structural Engineering and Mechanics
• /
• v.24 no.6
• /
• pp.765-769
• /
• 2006

• The Korean Journal of Food And Nutrition
• /
• v.13 no.1
• /
• pp.1-5
• /
• 2000

Detection for heat-labile enterotoxin(LT) of enterotoxigenic Escherichia coli(ETEC, EC81, O148:H28) and enterotoxin of enterotoxigentic Clostridium perfringents type A(CP, NCTC8238, Hobbs serotype 2) by use of a polymerase chain reaction (PCR) assay were positive reaction, which using LT gene-specific primers of ETEC with a detection limit equivalent from 100ng/${\mu}\ell$ to 1 pg of a DNA fragment of 417-bp in EC81 and enterotoxin gene-specific primers of CP with a detection limit equivalent from 100ng/${\mu}\ell$ to 10pg of a DNA fragment of 364-bp in NCTC8238. Detection for a LT gene of ETEC highly appeared 10-fold sensitivity than an enterotoxin gene of CP.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11c
• /
• pp.525-532
• /
• 2000

A new spectroscopic method for pesticide residues detection on agricultural products was developed. The general determination methods are high performance liquid chromatography (HPLC), gas chromatography (GC) or GC-mass spectrometry. They have provided relatively good detection limit and accuracy with complicated and time-consuming (5hrs above) procedures. In addition freshness is very important for evaluating qualities of agricultural products. This requires a simple and fast method for detection of pesticides. Reflectance, transmittance and fluorescence spectrometry of pesticides were tested using UV range because most of pesticides contain conjugation band in the molecular structures. Fluorescence spectrometry showed better sensitive to detect pesticide residues than did reflectance and transmittance spectrometry. Intensity and shape of fluorescence spectra showed different patterns with different structures of pesticides. Detection limit for fluorescence spectrometry was 0.1 ppm to 10 ppm depending on the structures of pesticides. Application of fluorescence spectrometry appears to be an easy method for detection of pesticide residues on agricultural products.

• Journal of Environmental Science International
• /
• v.4 no.1
• /
• pp.91-103
• /
• 1995

The reaction rate, equilibrium, and flow injection analysis methods were fundamentally evaluated for the determination of aqueous ammonia. The selected indophenol blue method was based on the formation of indophenol blue in which ammonium ion reacted with hypochlorite and phenol in alkaline solution. In the optimized reaction condition, the reaction followed 1st order reaction kinetics and the final product was stable. The absorbance measurements before and after the equilibrium were utilized for the reaction rate and equilibrium methods. The reaction rate methods, based on the relative analytical signals for the possibility of eliminating interferents, were shown to have good linear calibration curves but the detection limit and the calibration sensitivity were poorer than those in the equilibrium method. The detection limits were 32-49 pub and 24 pub for the reaction rate and equilibrium methods, respectively In the flow injection analysis, the absorbance was measured before the equilibrium reached and thus resulted in 30% reduction of calibration sensitivity. However, the detection limit was 11 ppb, indicating that the peak-to-peak noise for the blank was remarkably improved. Compared to the manual methods, the optimized experimental condition in a closed reaction system reduced the blank absorbance and the inclusion of ammonia from the atmosphere was prevented. In addition, highly reproducible mixing of sample and reagents and analytical data extracted from continuous recording showed excellent reproducibility.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.247-250
• /
• 2006

Maximizing the productivity in reactive ion etching, early detection of process equipment anomaly became crucial in current high volume semiconductor manufacturing environment. To address the importance of the process fault detection for productivity, support vector machines (SVMs) is employed to assist the decision to determine process faults in real-time. SVMs for eleven steps of etching runs are established with data acquired from baseline runs, and they are further verified with the data from controlled (acceptable) and perturbed (unacceptable) runs. Then, each SVM is further utilized for the fault detection purpose utilizing control limits which is well understood in statistical process control chart. Utilizing SVMs, fault detection of reactive ion etching process is demonstrated with zero false alarm rate of the controlled runs on a run to run basis.

• Journal of Biosystems Engineering
• /
• v.34 no.4
• /
• pp.254-259
• /
• 2009

Conventional methods for pathogen detection and identification are labor-intensive and take several days to complete. Recently developed biosensors have shown potential for the rapid detection of foodborne pathogens. In this study, an impedimetric biosensor was developed for rapid detection of Salmonella typhimurium. To develop the biosensor, an interdigitated microelectrode (IME) was fabricated by using semiconductor fabrication process. Anti-Salmonella antibodies were immobilized based on either avidin-biotin binding or self assembled monolayer (SAM) on the surface of the IME to form an active sensing layer. To evaluate effect of antibody immobilization methods on sensitivity of the sensor, detection limit of the biosensor was analyzed with Salmonella samples innoculated in phosphate buffered saline (PBS) or food extract. The impedimetric biosensor based on SAM immobilization method produced better detection limit. The biosensor could detect 107 CFU/mL of Salmonella in pork meat extract. This method may provide a simple, rapid, and sensitive method to detect foodborne pathogens.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.2
• /
• pp.184-190
• /
• 1999

The use of the polymerase chain reaction (PCR) method was described using two sets of primers based on the ceuN gene (JEJ 1 and JEJ 2) which encodes a protein involved in siderophore transport and 16S rRNA gene (pA and pB) for the sensitive and specific detection of enteropathogen Campylobacter jejuni. Six oligonucleotides were utilized in an amplification experiment and PCR products of predicted sizes were generated from whole cells and boiled cell lysates at the same intensity. Two sets of the primer pairs, JEJ and pAB, were specific enough for all C. jejuni strains tested for the direct use of whole cells without DNA extraction or lysis steps. In the PCR using the pAB primer pair, the detection limit, as determined by the ethidium bromide staining of the amplification products on agarose gels, was at the level of $10^1$ bacteria cells or less in both the pure culture and artificially inoculated milk and chicken enrichment samples, whereas the detection limit with the JEJ primer pair was relatively low, i.e. $10^3$ cells or more in the same PCR samples. The PCR method using either a primer JEJ or pAB was both repeatable and specific for the detection of C. jejuni in food. This method is simply completed within 4 h.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.6
• /
• pp.757-766
• /
• 2012

In this study, we have examined concentration distribution and patterns of PCBs in waters, sediments and soils in an agricultural area of South Korea to investigate the relationship between PCBs sources and concentration levels. The concentration of PCBs in water samples were ranged from lower values below detection limit to 8.25 ug/L and the concentration of PCBs in sediment samples were ranged from lower values below detection limit to 76.67 ug/Kg. The concentration of PCBs in soil samples were ranged from lower values below detection limit to 23.51 ug/Kg. These contamination levels were far below the guideline values suggested for environmental quality assessment. The homologue patterns in samples varied from sample to sample, but isomer patterns were very similar with each other. PCB-138 and PCB-153 were predominant congeners in the soil and sediment, which were similar to the results obtained from previous studies. With these results, the assessment of potential sources of PCBs contamination in the sediments of the Nakdong river basin was performed. The principal components were extracted by Principal Component Analysis(PCA). As the result of PCA, it could be expected that PCBs in samples of this study were more affected by PCB products than combustion processes and mostly affected by already-known sources. The PCBs in the soil and sediment samples were related with commercial PCB products.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.77.1-77.1
• /
• 2016

We investigate the properties and detection conditions for the planetary caustic perturbation of close-separation planets. To find the properties of the planetary caustic perturbation, we construct deviation maps by subtracting the single-lensing magnification of the lens star from the planetary lensing magnification for various lensing parameters. We find that each deviation area of the positive and negative perturbations disappears at the same normalized source radius according to a given deviation threshold regardless of mass ratio but disappears at a different normalized source radius according to the separation. We also estimate the upper limit of the normalized source radius to detect the planetary caustic perturbation. We find simple relations between the upper limit of the normalized source radius and the lensing parameters. From the relations, we obtain an analytic condition for the detection limit of the planet, and which show that we can sufficiently discover a planet with the mass of sub-Earth for typical microlensing events. Therefore, we expect to add the number of low-mass planets in the next-generation microlensing experiments and conclude that our detection condition of the planet can be used as a important criteria for maximal planet detections considering the source type and the photometric accuracy.