• Korean Journal of Soil Science and Fertilizer
• /
• v.9 no.2
• /
• pp.77-81
• /
• 1976

On a newly reclaimed acidic soil, investigation was made to find out the influence of lime and phosphorus application by a large quantity on the uptake of zinc by corn and its distribution in leaves and stem, under a factorial combination with two levels of zinc, lime, and phosphorus with three kinds of soil texture. The results are summarized as following, 1. The concentration of zinc in stem reflected the zinc uptake status of corn better than the leaves. The concentration of zinc in stem responded clearly to the treatments of lime and zinc, while those of leaves tended to be constant regardless of the application of lime and zinc. 2. The zinc uptake was not improved by compost application though it increased the yield of corn significantly. 3. The application of lime for neutralization of soil with low level of phosphorus application affected the yield of dry matter differently among different soils, slight increase on sandy loam soil, slight decrease on loam soil, and significant decrease on clay loam soil. The yield decrease on clay soil is considered to be due to the decreased availability of applied phosphorus owing to the large amount of lime applied.

• Korean Journal of Soil Science and Fertilizer
• /
• v.7 no.3
• /
• pp.185-191
• /
• 1974

Incubation and pot studies were conducted with upland soils for a study on determination of the lime requirement based on exchangeable alumium content. The results obtained are as follows; 1. Results of chemical analysis of upland soils show that pH varies from 5.0 to 5.4, and exchangeable Al moves with the range of 1.3-3.0m.e/100gr. Exchangeable Al decreases with years of cultivation. 2. Incubation studies shows that on acid mineral soils almost all exchangeable Al, on average 95% was neutralized with the lime to neutralized 100% exchangeable Al. On volcanic ash soil, however, only 65.5% was neutralized with the lime estimated to neutralize the equivalent of 200% exchangeable Al. The latter has required more lime. 3. The pH of mineral soils is on the average increased from an initial 5.2 to 6.3 when 95% of exchangeable Al is neutralized, whereas that on volcanic ash soil is increased from an initial 5.3 to 5.5 only when lime is applied at rate to neutralize the equivalent of 200% exchangeable Al. 4. A high correlation coefficient (r=0.99) was obtained between exchangeable Al and exchangeable acidity. This indicates that exchangeable acidity is primarly a result of exchangeable Al. 5. In pot experiments with soybean cultivated on one of the hill land soils (Songjoong soil) the application of fused phosphate and triple superphosphate based on a 5% saturation rate ($P_2O_5$ 32.1 kg/10a) showed that the liming factor for calculation of the optimum lime requirements based on exchangeable acidity was 0.594 for fuses phosphate or 1.132 for tripple superphosphate, and optimum pH is approximately 6.0 and optimum neutralization rate of exchangeable Al is 80-90%.

• Korean Journal of Environmental Agriculture
• /
• v.20 no.4
• /
• pp.258-261
• /
• 2001

The paper industry produces about 6,000 ton of paper ashes yearly with by-products in Yuhan-Kimberly Ltd. The paper ashes was analyzed and evaluated for their potential as the soil acidity amendment materials. This study was conducted to investigate a reasonable amount of paper ashes for soil acidity amendment effect to be applied onto raising seedling of Calendula officinalis L. The mixed proportion of applied ashes, which was compared with agricultural lime, was treated to 0, 5, 10 and 15% (v/v) in mixed soil (pH 6.0) and the peat moss (pH 3.8) respectively. Consequently paper ashe was found to be more effective than agricultural lime at germination percentage, growth condition and in sharp initial increase of soil pH. The appropriate proportion of applied paper ash was 10% (v/v) at the soil-mix, and 15% (v/v) at the peat-moss. Soil application of paper ashes may provide supplemental quantities of K, Ca, Mg and other plant nutrients. But heavy metal concentrations in paper ash was low and should not limit application rates.

• Journal of the Korea Safety Management & Science
• /
• v.20 no.3
• /
• pp.27-36
• /
• 2018

The steel pipe manufacturing industry deals with facilities and materials. Especially thermal facilities are close to vapor cloud explosion (VCE) and may cause secondary damage to facilities because they deal with corrosive substances such as hydrofluoric acid, sulfuric acid and acid, fire, explosion, leakage etc. It is in danger. In this study, hazard identification method was conducted using HAZOP techniques and quantitative risk analysis was conducted using e-CA, a program that supports accident impact analysis. Equipment in the influence range of ERPG - 3 was determined to be a facility requiring replacement. It was decided that neutralization is necessary using slaked lime. Based on the cost of loss, We presented the proper replacement which is the timing of the dangerous facility. As a result, It was ideal to replace the facilities with 20 years of heat treatment facilities, one year of hydrofluoric acid storage tank, 20 years of sulfuric acid storage tank, and 5 years of hydrochloric acid storage tank.

• Journal of the Korean Vacuum Society
• /
• v.21 no.6
• /
• pp.333-341
• /
• 2012

Indium Tin Oxide (ITO) thin films were prepared by RF magnetron sputtering with different flow rates of $O_2$ gas from 0 to 12 sccm. Electrical and optical properties of these films were characterized and analyzed. ITO deposited on soda lime glass and RF power was 2 kW, frequency was 13.56 MHz, and working pressure was $1.0{\times}10^{-3}$ Torr, Ar gas was fixed at 1,000 sccm. The transmittance was measured at 300~1,100 nm ranges by using Photovoltaic analysis system. Electrical properties were measured by Hall measurement system. ITO thin films surface were measured by Scanning electron microscope. Atomic force microscope surface roughness scan for ITO thin films. ITO thin films secondary electron emission coefficient(${\gamma}$) was measured by ${\gamma}$-Focused ion beam. The resistivity is about $2.4{\times}10^{-4}{\Omega}{\cdot}cm$ and the weighted average transmittance is about 84.93% at 3 sccm oxygen flow rate. Also, we investigated Work-function of ITO thin films by using Auger neutralization mechanism according to secondary electron emission coefficient(${\gamma}$) values. We confirmed secondary electron emission peak at 3 sccm oxygen flow rate.

• Economic and Environmental Geology
• /
• v.56 no.1
• /
• pp.103-114
• /
• 2023

The Christian Museum of Gongju Jeil Church was first built in 1931 and was largely damaged during the Korean War, but the walls and chimneys have been preserved. This building has a high architectural values in that the chapel was reconstructed in 1956, and maintains its original form through repair of damaged parts rather than new construction. The stained glass windows were as installed in 1979 and has a great significance in the Dalle de Verre method using lump glass. However, some of the stained glass damaged partially, such as various cracks and splits, and vertical and horizontal cracks in the joint fillers of supporting the colored glass. As the structural materials of the stained glass window, an iron frame and cement mortar filled with it were used, and corrosion of iron, cracking of mortar and granular decomposition appear partially due to weathering. In the joint fillers, the content of Ca and S is very high, indicating that gypsum were used as admixtures, and the gypsums grow in a rhombohedral and forms a bundle, which is investigated to have undergone recrystallization. As a result of modeling the ultrasonic velocity at the joint fillers, the left and right windows at the entrance show relatively weak in the range of 800 to 1,600m/s, and the lower right corner of the altar window and the upper left corner of the center window were also 1,000 to 1,800m/s, showing relatively low physical properties. And gypsums produced during the neutralization of lime mortar were detected in the joint fillers and contaminants on the surface. Such salts may cause damage to the joint material due to freezing and thawing, so appropriate preventive conservation is required. Also, since various damage types are complexly appearing in stained glass window and joint filler, customized conservation treatment should be reviewed through clinical tests.