• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2007년도 학술대회
• /
• pp.22-26
• /
• 2007

In the fibre to the home (FTTH) era, it is expected that broadband network provisioning will require thousands of optical fibres to be accommodated in a central office for optical access networks. An optical fibre line testing system could be used to reduce maintenance costs and improve service availability depending on the PON's element manager capabilities and the maintenance procedures adopted by the network supplier. When monitoring optical fibres transmitting communication lights, a wavelength of 1625 nm is used for maintenance testing. The splitter installed optical filters allow the communication light to pass but that cut off the test light in the front of optical line terminals (OLTs) and optical network terminals (ONTs). In the economic point of view, We design new planer lightwave circuit splitter embedded filtter and study it optical property.

• 한국통신학회논문지
• /
• 제14권5호
• /
• pp.521-530
• /
• 1989

고속집적회로와 광 전송 기술에 기초한 비동기식 전송 및 교환(Asynchronous Transfer Mode) 방법은 곧 다가올 광대역 종합정보 통신망(Broadband ISDN)의 중심 기술이 될것으로 보여진다. 광대역 패킷(ATM) 망이 수용하여야 할 여러가지 기능 중 영상 정보의 처리 능력은 아직 많은 연구를 요구하고 있다. 본 논문에서는 광대역 패킷망에서의 영상 통신에 제기되는 문제점들을 파악하고 이에 관한 가능한 해결방법을 제시하고자 한다. 특히 효율적인 대역폭의 사용과, 최소의 화질 손상을 가능케 하는 계층적 비디오 코딩을 이용한 클럭 동기, 패킷 유실의 보상 및 전송 방법 등을 중점적으로 제시하였다.

• 전자공학회논문지D
• /
• 제34D권5호
• /
• pp.67-74
• /
• 1997

In this paper, we psresent a new scheme to synthetically generate a HPO digital hologram for a three-dimensional image that is modelled as the horizontally stacked two-dimensional images. The proposed method transforms a lightwave field into the angular spectrum of planewaves, which enables this method to use FFT routines, rather than using numerous arithmetic calculations. Hence, this method may be able to not only lead to the dramatically less computation but provide relatively excellent performances due to the phase error-free transformation. We present sampling constraints and implementaton procedure to obtian a hololine for each image and also point out the necessity of interpolation. Simulatioj results are presented to show the comparison with the conventional method in terms of computation time and performances, including the behaviors resulting form the different selection of parameter values to be used in the interpolations.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2003년도 하계학술대회
• /
• pp.49-51
• /
• 2003

This test data informs to compare components from different manufactured coupler type. On the point of reliability, less than 1x8 output branching number, fuse type coupler was more stable than PLC type coupler. But more than 1x8 output branching number, PLC type coupler was more stable. This test data showed critical branching point, on the point of reliability.

• 대한전자공학회논문지SD
• /
• 제39권5호
• /
• pp.41-45
• /
• 2002

비대칭 이중층 셔플넷 토폴로지를 멀티홉 WDM cross-connect 구현을 위하여 적용하였다. 그 결과로 필요한 WDM cross connect 수가 기존의 셔플넷 토폴로지 적용에 비하여 반으로 감소하며 이로 인하여 평균 흡수가 감소하고 평균 지연 시간을 줄일 수 있다.

• ETRI Journal
• /
• 제24권5호
• /
• pp.398-400
• /
• 2002

Using $Cr_2O_3$ thin film, we developed a novel etch-stop technique for the protection of silicon surface morphology during deep ion coupled plasma etching of silica layers. With this technique we were able to etch a silica trench with a depth of over 20 ${\mu}m$ without any damage to the exposed silicon terrace surface. This technique should be well applicable to fabricating silica planar lightwave circuit platforms for opto-electronic hybrid integration.

• ETRI Journal
• /
• 제20권1호
• /
• pp.28-36
• /
• 1998

A simple experimental method to design gain-flattened erbium-doped fiber amplifier is proposed and demonstrated based on the two linear relations between the output power and the pump power, and between the gain and the length of the eribium-doped fiber at the gain flattened state. The spectral gain variation of the eribium-doped fiber amplifiber constructed by this method was less than 0.4 dB over 12 nm (1,545~1,557nm) wavelength region. The gain flatness is also controlled within 0.4 dB over the input power range of -30~-15dBm/ch through the feedback control utilizing the amplified spontaneous emission power in the 1,530 nm region.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권1호
• /
• pp.30-35
• /
• 2004

We have carried out a basic experiment in order to develope a super high-resolution optical microscope which transcend the limitation of diffraction and the wavelength of lightwave. The image of this scope is composed by measuring the evanescent wave which is localized on the surface of the testing materials. A detecting probe was fabricated with a single mode optical fiber to be sharpened by the chemical etching, and drived by PZT. The standing wave of $0.33\mu\textrm{m}$ wavelength evanescent wave which was generated from the $0.78\mu\textrm{m}$-wavelength semiconductor laser was detected by the $0.5\mu\textrm{m}$-thickness optical fiber probe.

• Journal of the Optical Society of Korea
• /
• 제20권3호
• /
• pp.335-342
• /
• 2016

We demonstrate an optical asynchronous transfer mode/wavelength division multiplexing (OATM/WDM) optical access network, using a router based on an optical header decoder to conduct next-generation communications. The router consists of a decoder or hardware analysis processing of the header bit and switches. The router in the OATM/WDM optical access network is a key technology by which to satisfy subscribers’ requests, including reliability, cost efficiency, high speed, large-capacity transmission, and elevated information security. In this study, we carry out experiments in which a header decoder delivers to 16 and 32 subscribers with a single wavelength in the router. These experiments confirm the decoder’s successful operation via hardware using 4 and 5 header bits. We propose that this system may significantly contribute toward the realization of an optical access network that provides high-quality service to subscribers of next-generation communications.

• 대한전자공학회논문지SD
• /
• 제38권6호
• /
• pp.412-419
• /
• 2001

본 논문에서는 유리집적광학을 이용하여 채널 도파로, Y-분리기, CWDM 등의 개별소자와 이들을 하나의 유리기판위에 평면형으로 집적하겨 제작함으로써 1.31/1.55㎛ CWDM(Coarse Wavelength Division Multiplexing) 및 1.55㎛ 대역 DWDM (Dense WDM) 수동 광 망에 적용할 수 있도록 하였다. CWDM에 적용한 결과, 1.55㎛ 파장에서는 30㏈, 1.31㎛ 파장에서는 15㏈ 이상의 교차 비를 얻을 수 있었다.