• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.1
• /
• pp.111-116
• /
• 2015

In this study, the constant current converter for LED lighting was designed and the electrical characteristics of the fabricated SMPS was measured. When the output current is 300mA the maximum efficiency of 85% was shown and the output current is in the range of 100~400mA efficiency over 70% were exhibited. Also the dimming levels control over the range of 0 to 100% was possible by using a control signal of 0~250mV.

• Journal of Advanced Information Technology and Convergence
• /
• v.9 no.2
• /
• pp.75-87
• /
• 2019

This paper presents a fully digital controlled power supply unit for the wireless controlled dimmable LED lighting system. The proposed power supply designed using a fly-back converter, which is directly controlled by a microprocessor. Although the proposed circuit does not sense the AC input current and has not AC input voltage feed-forward, it can achieve a high power factor. The proposed power supply directly regulates the output power for LED loads using the PWM and PFM control of the fly-back converter without additional regulator. For a wireless remote control function, the Zigbee modem is equipped in the proposed power supply. A prototype set-up has been built and tested. Through the experiment with a prototype set-up, the usefulness of the proposed power supply is verified.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.11
• /
• pp.788-797
• /
• 2010

This study examines the influence of fluctuating daylight illuminance on daylight dimming control systems. Field measurements were performed for a full-scale mocked-up model under various daylight conditions in winter. Fluctuating ranges for a partially-shielded photosensor were great when the variation of sky ratio was great. When solar altitude was lower the illuminance and fluctuating range of illuminance were great due to the influence of direct components of daylight and the interrefelction between surfaces in rear area of space. It implies that daylight dimming system would not function effectively, unless the desktop illuminance by daylight is enough. Fluctuation ranges of photosensor illuminance were lower than 50 lx under clear sky conditions, but they were greater than 100 lx under partly-cloudy sky conditions. It means that the fluctuation range of electric light output of lighting fixture would greater under the partly-cloudy conditions and cause potential visual annoyance to occupants. Outdoor vertical illuminance reaching the windows would be an effective factor that can be used to predict the fluctuation of photosensor signals for effective controls of daylight dimming system.

• 한국태양에너지학회:학술대회논문집
• /
• 2012.03a
• /
• pp.522-528
• /
• 2012

Currently, the energy consumption of electric lighting in an office building is accounted for more than 30% of the total energy consumption. In order to reduce the energy consumed by the indoor lighting, the daylight as a natural energy resource can play an important role in energy savings. The daylight can have positive impacts on improvement of work efficiency and productivity, and also make people feel more psychologically stable. Moreover, by using the daylight, we can definitely reduce the energy consumption in office buildings. Thus, the purpose of this study is to determine the LED dimming ratio depending on the ratio by calculating the amount of artificial illumination required according to the change of daylight by using the light simulation software that can quantify and visualize the performance of daylight. As a result, the energy savings could be obtained up to 30%.

• Journal of Convergence for Information Technology
• /
• v.7 no.3
• /
• pp.97-103
• /
• 2017

In this paper, we aim to investigate the generalization of ZRC codes by performing performance analysis on various coding rates and channel conditions of Zero Reduction Code (ZRC) for dimming control in VLC system. Simulation results show that the ZRC codes with relatively high coding rate achieve the enhanced BER performance as the RMS (Root Mean Square) delay spread value increases in the NLOS channelse. Therefore, it is expected that the designing of the dimming control technology using ZRC in the future visible light communication system will help to determine the coding rate according to the channel state through the analysis result in this study.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.12
• /
• pp.20-28
• /
• 2008

It is prevalent to research on the energy saving systems using daylight. Daylight responsive dimming systems are to automatically control lighting output by available daylight for maintaining target illuminance on the workplane. The system application is not popular because of blocked daylight by shading systems. Automated roller shading systems automatically control shade height by sun position and sky conditions. Both daylight responsive dimming systems and automated roller shading systems should be integrated for energy savings and visual luminous environment. In this research, software are developed and integrated for control of integrated systems.

• Journal of the Korean Solar Energy Society
• /
• v.32 no.3
• /
• pp.50-58
• /
• 2012

The objective of this study is to evaluate the lighting dimming rates with various parameters of the building skin in a small office. We compared to simulated workplane illuminance and measured workplane illuminance for the base model. After that, the five veriables(the presence of vertical wall in double skin facade, the presence of windowsill, window to wall ratio(WWR), window visible transmittance, the width of double skin facade) were applied to base model, and we analyzed the simulated lighting energy saving rates. The results are listed as below. The simulated workplane illuminance results are similar to the measurement. Simulated illuminance was smaller than measured illuminance by 16.5%(60 lx). In accordance with applicable building skin parameters, lighting energy saving rate results are summarized as follows. Lighting energy saving rate of case1(windowsill height 0.7m) is higher than that of base case(windowsill and vertical wall) by 7.3% and the lighting energy saving rate of case2(no vertical wall) is higher than that of base case by 7.6% and the lighting energy saving rate of case3(no windowsill and vertical wall) is higher than that of base case by 12.4%. The lighting energy saving rate is increased by 2.3%, when window visible transmittance is increased from 70% to 86%. The lighting energy saving rate is increased by 4.6%, when we changed the WWR 70% to 90%. lighting energy savings rate is increased by 6.5%, when the width of double skin facade is reduced from 1m to 0.3m.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.2
• /
• pp.14-21
• /
• 2013

Today, energy problem has become an important issue, and a development of renewable energy is urgent. In architectural fields, a research of the energy efficient lighting system using renewable energy is in progress. The energy efficient lighting system could be realized by integrating a daylight responsive LED lighting control system and a blind PV system. This system is able to save and generate electric energy. Efficiency of this system depends on control methods of blind PV. As a preliminary research, this research analyzed power generation and inflow of available daylight according to control method of blind PV.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.12
• /
• pp.44-53
• /
• 2013

This study has attempted to investigate how subjects perceive changes of brightness and their visual comfort according to daylight responsive LED(Light Emitting Diode) dimming systems in the office with venetian blind. Two studies was conducted. First study is that how subjects perceive changes of brightness and their visual comfort depending on angle control method of the venetian blind while the workplane illuminance level is being maintained through daylight responsive LED dimming system. Second study is that how subjects perceive changes of brightness and their visual comfort depending on the amount of daylight penetrated into the building while the illuminance level is being maintained through daylight responsive LED dimming system. The results of this study could be proposed as basic data in the control of the venetian blind and LED lighting in consideration of their perception on changes of brightness and visual comfort.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05b
• /
• pp.502-506
• /
• 2012

본 논문은 LED 조명 환경에서 Zigbee를 이용해서 Dimming 제어 모듈을 구성 하였다. 현재 사용되고 있는 LED 제어 모듈는 일반적으로 단일 출력을 사용하여 LED 조명의 일정한 밝기를 고정 출력이 되도록 사용되어지고 있다. 본 논문에서 구성된 무선 통신 모듈은 Zigbee를 이용하여 실내 환경에서 측정된 조도값을 무선으로 전송하도록 조도 센서 모듈을 구성 하였으며, 무선으로 전송된 조도값에 대한 출력을 제어하도록 구성하였다. MCU는 LED Driver IC를 이용하여 PWM 신호에 따라서 LED Driver IC에서 출력 전압을 변화하도록 하여 6단계의 밝기로 LED조명을 Dimming하도록 구성하였으며, 무선조도 센서는 10~15m의 거리에서 안정적으로 동작된다.