• Journal of Animal Science and Technology
• /
• v.64 no.1
• /
• pp.1-9
• /
• 2022

Equilume light masks had no impact on hastening the resumption of estrous cyclicity in mares maintained in outdoor pastures on the mainland of Korea due to the cold weather conditions. Jeju Island is a major horse-breeding site in Korea and is warmer than the mainland during the winter season. Therefore, the primary objective of this study was to explore the efficiency of the Equilume light mask on the resumption of seasonal estrous cycles in Thoroughbred mares on Jeju Island. A total of 20 nonpregnant mares were randomly divided into the Equilume light mask (n = 9) and stable lighting (n =11) groups. The experiment was performed at seven different horse-breeding farms located on Jeju Island from November 15, 2020, to February 15, 2021. The mares were exposed to the respective lights from 16:00 to 23:00. Follicle size and uterine edema were measured by ultrasound scanning. Body condition scores (BCS) were also monitored during the experiment. Statistical analysis was conducted using the SAS and SPSS software, and p-values of < 0.05 were considered statistically significant. Two of the nine (22.2%) mares in the Equilume light mask group and three of the 11 (27.28%) mares in the stable lighting group were still cycling in December and January, which were considered as all-year-round cycling mares. On February 15, there was no difference between groups in the resumption of early seasonal estrus cycle, which was determined by follicles > 25 mm in addition to uterine edema. All mares in the Equilume light mask group and five of the eight mares (62.5%) in the stable lighting group had resumed cycling. Interestingly, six of the seven mares (87.5%) in the Equilume light mask and four of eight mares (50%) in the stable lighting group had already ovulated on February 15 (p > 0.05), as determined by the presence of a recent corpus luteum. No difference was observed in BCS and uterine edema between groups (p > 0.05). In conclusion, the Equilume light mask can be an effective approach to induce early seasonal estrus cycles of mares in Jeju Island, and it also enhances the efficiency of farm management by reducing labor.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.691-692
• /
• 2012

• Horticultural Science & Technology
• /
• v.34 no.1
• /
• pp.84-93
• /
• 2016

Plant factories with artificial lights require a large amount of electrical energy for lighting; therefore, enhancement of light use efficiency will decrease the cost of plant production. The objective of this study was to enhance the light use efficiency by using filters to diffuse the light from LED sources in plant factory conditions. The two treatments used diffuse glasses with haze factors of 40% and 80%, and a control without the filter. For each treatment, canopy light distribution was evaluated by a 3-D ray tracing method and canopy photosynthesis was measured with a sealed acrylic chamber. Sixteen lettuces for each treatment were cultivated hydroponically in a plant factory for 28 days after transplanting and their growth was compared. Simulation results showed that the light absorption was concentrated on the upper part of the lettuce canopy in treatments and control. The control showed particularly poor canopy light distribution with hotspots of light intensity; thus the light use efficiency decreased compared to the treatments. Total light absorption was the highest in the control; however, the amount of effective light absorption was higher in treatments than the control, and was highest in treatment using filters with a haze factor of 80%. Canopy photosynthesis and plant growth were significantly higher in all the treatments. In conclusion, application of the diffuse glass filters enhanced the canopy light distribution, photosynthesis, and growth of the plants under LED lighting, resulting in enhanced the light use efficiency in plant factory conditions.

• International Journal of Human Ecology
• /
• v.8 no.2
• /
• pp.29-46
• /
• 2007

The purpose of this study was to analyze characteristics of the bedroom environment of nursing homes for the elderly in Korea. Field case research was performed using a structured checklist and measurements, from Oct. 28th to Dec. 2nd, 2006. Collected data were analyzed for cognitive efficiency, privacy, safety, supportiveness and amenity. Based on nursing homes for the elderly nationwide (Ministry of Health and Welfare, 2006), we choose 43 facilities in which Seoul and six megalopolis areas that had answered our questionnaire in 2006. We then narrowed the list to 14 facilities, balanced them in terms of regional population. The contents of investigation consisted of eight categories: that general characteristics of the bedrooms (including number of residents per room, using a bed or floor mat, the size and shape of the chamber, space for wheelchair turning, signage), door of bedroom (including door, doorknob, door sill/level difference), windows in the bedroom(including type of window, window sill height, window treatment, window safety device/shape, view/daylight), furniture (including personal furniture and lock), finishes (material, character and color of wall, floor, ceiling), lighting (including types of lighting, night lighting, switch), bathroom in the bedroom (including signage, door size/type, doorknob shape, height of the washbowl, size of toilet bowl, handrail, finishes), and other facilities (including outlet and handrails).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7256-7261
• /
• 2015

This paper devised a plant growing system As LED light source, three monochromatic lights (red, blue, white) and three mixed lights (red1+blue1, red2+blue1, red1+blue2) were made. According to the optical properties of those LED light sources and change in the amount of light, this author analyzed the characteristics of luminance and PPFD and also plant growth. According to the light efficiency of those LED light sources, it was high in white light as 125 lm/W and was low in red1+blue2 light as 9.9 lm/W. This result shows that monochromatic light has higher light efficiency than mixed light. The PPFD ($25{\mu}mol$, $50{\mu}mol$, $100{\mu}mol$) luminance in different wavelengths of LEDs was high in white LEDs and was low in blue LEDs. therefore, it is possible to devise an efficient LED lighting system appropriate for growing plants by variety monochromatic lights and mixed light wave length combination of LED light source.

• Journal of Energy Engineering
• /
• v.28 no.3
• /
• pp.34-41
• /
• 2019

It is essential to introduce EERS (Energy Efficiency Resource Standards) according to the trend of the era in which energy saving is emphasized, and it is time to settle down in a stable manner. Electric motors and lighting devices, which account for more than 60% of the nation's electricity use, are the most effective items of the EERS. And accurate methods of calculating savings must be preceded. In this study, the operation rate and load rate are measured through the demonstration of energy use at 400 businesses and the measured rates are used for EERS savings calculation. The results imply that the proposed method can be successfully applied to calculate cost-effective and reliable energy savings.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.3
• /
• pp.201-208
• /
• 2006

An alternative to the nuclear and fossil fuel power is renewable energy technologies (hydro, wind, solar and ocean), and the research about the highest efficiency machinery have been processed. The high-power LED is the representative one among those. In this paper, a high efficiency lighting system using a battery charged with solar or wind power is proposed for a high power LED. And a new efficient converter called 'Back-boost' is proposed. The validity of the lighting system scheme is verified by experimental results based on a laboratory prototype.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.10a
• /
• pp.279-283
• /
• 2009

Distributed generation(DG) of combined cooling, heat. and power(CCHP)has been gaining momentum in recent year as efficient, secure alternative for meeting increasing energy demands. This paper presents the energy performance of microturbine CCHP system equipped with an absorption chiller by modelling it in hospital building. The orders of study were as following. 1)The list and schedule of energy consumption equipment in hospital were examined such as heating and cooling machine, light etc. 2) Annual report of energy usage and monitoring data were examined as heating, cooling, DHW, lighting, etc. 3) The weather data in 2007 was used for simulation and was arranged by meteorological office data in Daejeon. 4) Reference simulation model was built by comparison of real energy consumption and simulation result by TRNSYS and ESP-r. The energy consumption pattern of building were analyzed by simulation model and energy reduction rate were calculated over the cogeneration. As a result of this study, power generation efficiency of turbine was about 30% after installing micro gas turbine and lighting energy as well as total electricity consumption can be reduced by 40%. If electricity energy and waste heat in turbine are used, 56% of heating energy and 67% of cooling energy can be reduced respectively, and total system efficiency can be increased up to 70%.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.955-962
• /
• 2005

Power efficiency, lifetime and stable manufacturing processes are the crucial parameters for the success of organic light emitting diodes (OLEDs) in display and lighting applications. Highest power efficiencies of PIN-OLEDs for all principal colours and for bottom and top emission OLED structures have been demonstrated. The PIN structure, which means the incorporation of intentionally doped charge carrier transport layer in a suitable OLED layer setup, lowers the operating voltage to achieve highest power efficiencies. Up to now the n-doping of the electron transport layer has been done by alkali metal co-deposition. This has main draw-backs in terms of manufacturability, since the handling of large amounts of pure Cs is a basic issue in production lines. Here we present in detail results on PIN-OLEDs comprising a newly developed molecular n-dopant. All the previous OLED performance data based on PIN-OLEDs with alkali metal doping could be reproduced and will be further improved in the future. Hence, for the first time, a full manufacturing compatible PIN-OLED is available.

• Journal of Power Electronics
• /
• v.9 no.2
• /
• pp.164-172
• /
• 2009

Recently, 2-dimensional flat light sources have been attracting much attention for its use in LCD backlight applications because of its high luminous efficiency and uniformity. A long-gap discharge, mercury-tree flat fluorescent lamp has been developed, which shows a high brightness ($>5000\;cd/m^2$) and high luminous efficacy (60 lm/W). Additionally, it has a wide operating margin and stable driving condition with the aid of an auxiliary electrode. For driving the lamp, a narrow pulse power to maintain the glow discharge state is required. Since there has been no research for this kind of lamp driving, this paper proposes a newly developed short-pulse, high-voltage lamp-driving scheme. The proposed lamp system uses a ballast with a coupled-inductor in order to raise the short pulse voltage up to the lamp ignition level and to obtain energy-recovery action during the glow discharge mode. The operation principles are presented and also the system performances such as the lighting efficiency, spatial and angular uniformities are evaluated by hardware experiments. The results show that the proposed lighting system is a good candidate for the next-generation of LCD backlight systems.