• 제목/요약/키워드: Lighting Distribution

검색결과 273건 처리시간 0.032초

LED 조명의 분광 분포에 따른 건물에너지 소비 (Energy consumption by Spectral Power Distribution Of LED lighting)

  • 정호연;김효인;김곤;윤근영
    • KIEAE Journal
    • /
    • 제12권3호
    • /
    • pp.101-106
    • /
    • 2012
  • Lighting energy accounts for approximately 20% of the electrical energy used worldwide. Thus, High efficiency Light emitting diode(LED)lighting is getting more popular as the next generation lighting replaced to traditional lighting fixtures. Also, LED lighting not only has a long lifetime but also can realize a variety visual environments through the wavelengh control. The lighting energy varies depending on the Spectral Power Distribution(SPD) even though the Illuminance level is same. Therefore, This study indicates that the difference of indoor energy consumption under the same illuminance level when Spectral Power Distribution(SPD) is different. As a result, Lighting energy consumption under red-color emphasizing SPD is about 10% lower than under blue-color emphasizing SPDs.

Design of an Ultrasmall Flexible-endoscope Illumination Optical System with Bat-wing Light Distribution

  • Ju-Yeop Yim;Chul-Woo Park;Mee-Suk Jung
    • Current Optics and Photonics
    • /
    • 제7권6호
    • /
    • pp.755-760
    • /
    • 2023
  • In this paper, an illumination optical system that can mitigate the saturation phenomenon in the center of an image (caused by the typical flexible-endoscope illumination system using LEDs with Lambertian light distribution) is designed. When an LED with Lambertian light distribution is used as a light source, the amount of light in the center of the endoscopic illumination system is relatively high, compared to the periphery, causing saturation in the image. Since this phenomenon causes difficulty in detecting the patient's lesion, it is necessary to find a lighting-system design that can alleviate the saturation phenomenon. Therefore, in this paper a lighting system with bat-wing light distribution, which can lower the intensity at the center and secure the maximum amount of light at the maximum light distribution angle, is designed. In addition, to check the performance of the designed lighting system, a simulation of illumination and luminance is conducted for a system using a common aspherical lens with otherwise the same components. As a result, it is confirmed that the lighting system designed in this paper effectively reduces the luminance value at the center and secures more luminance values at the periphery than the familiar lighting system.

야간 도로조명에서 가로수의 배치가 조명품질에 미치는 영향에 관한 시뮬레이션 연구 (A Study on the Effect of Roadside Trees' Layout Affecting Lighting Quality on Roadways by Simulation Approach)

  • 이종성;이석준
    • 대한안전경영과학회지
    • /
    • 제13권1호
    • /
    • pp.51-58
    • /
    • 2011
  • The uniformity of lighting distribution on the roadway is essential factor for drivers and pedestrians's safety during nighttime in urban streets. Also, the importance of roadside trees is one of the growing concern for better citizens' health and mitigating environmental impact on the urban street. But roadway lightings and roadside trees have different design or planting standards and they are not integrated in the systemic viewpoint for better safety of users during nighttime. The purpose of this study is to propose a simulation approach which assesses lighting quality in the view of illumination uniformity distribution of roadway lighting from design step and consider the layout of roadside trees. For improving lighting quality of roadway, simulation approach is needed for assessing the impact of diverse planting situation of trees and encouraged from beginning of design step for roadway construction.

형광등 대체용 LED조명과 CNT조명에 대한 전기적.광학적특성의 비교고찰 (The Characteristics Analysis of substitute LED and CNT Lighting for fluorescent lamp)

  • 황명근;임종민;신상욱;노재엽;조미령;이세현;전상규;최석준;이진우
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 2008년도 춘계학술대회 논문집
    • /
    • pp.205-208
    • /
    • 2008
  • 본 논문에서는 LED(light emitting diode)조명과 CNT(carbon nano-tube)조명에 대한 전기적인 특성과 광학적 특성을 측정하여 비교하고 고찰하였다. 특히 IES format 파일을 사용하여 각각의 조명등기구에 대한 LID(luminous intensity distribution) 분석과 조도 시뮬레이션을 수행하여 최대 및 최소, 그리고 평균조도 등을 분석하였다. 향후 LED 및 CNT 신광원은 면조명으로의 관련 기술기준 및 규격의 작성시 참고자료로 활용될 것으로 판단된다.

  • PDF

동적 LED 시스템의 조명원적 성능분석 (Evaluation on the lighting performance of a dynamic LED lighting system)

  • 김효인;김정태;윤근영
    • 한국태양에너지학회 논문집
    • /
    • 제31권2호
    • /
    • pp.113-119
    • /
    • 2011
  • LED lighting has received much attention in recent years due to its high energy efficiency and environmental friendliness. As the color of light can be obtained by adjusting the light intensity of LEDs, the quality of visual environment can be improved. The aims of this study are to develop a wavelength adjustable LED lighting system and to examine its lighting performances. The LED lighting system and experimental cell for assessment of the lighting performance were constructed. This LED lighting system is able to materialize the various spectral power distribution and color temperature of light through the control of the four dimmers. Up to $432^4$ kinds of light combinations are possible. The range of illuminance on workplane were measured as 7~1,831 ㏓. Improvement of psychological and physical functions for occupants can be expected according to control of lighting performances.

동적 LED 조명 시스템의 개발에 대한 연구 (Research on Development of a dynamic LED lighting system)

  • 최종대;김효인;윤근영
    • 한국태양에너지학회:학술대회논문집
    • /
    • 한국태양에너지학회 2011년도 춘계학술발표대회 논문집
    • /
    • pp.168-173
    • /
    • 2011
  • Recently, from a saving energy and environmental lighting sources point of view, using LED lighting have been increased rapidly. The colors of light was applied to the control of dimmers that is composed of red, green, blue, and white(RGBW) to improve the quality of visual environment. Moreover this study has been processed to develop adjustable dynamic LED lighting system on SPD and definitize the various spectral power distribution and color temperature of light through the control of the four dimmers. It is possible to combine up to $432^4$ kinds of light. Measurement of illuminance of range on working surface was as 7~l,831 lux. Application of visual environment for occupants can be expected according to control of lighting performance.

  • PDF

PLS(Plasma Lighting System)가속 수명 분포 특성 연구 (The characteristics research of accelerated life distribution for an Plasma Lighting System)

  • 이세현;신상욱;조미령;황명근
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2004년도 추계학술대회 논문집 전기물성,응용부문
    • /
    • pp.302-305
    • /
    • 2004
  • In this paper, We observed degradation characteristics of luminous flux for PLS. Because degradation tests can be a useful tool for assessing the reliability when few or even no failures are expected in a life tests, and we also use a temperature chamber to accelerate degradation of luminous flux for PLS. As a result, Exponential distribution and equation is best suitable model for PLS.

  • PDF

축구 경기장의 조명타워 위치에 따른 조도분포 해석 (Illuminance Distribution Analysis by Lighting Tower Position of o Soccer Stadium)

  • 김길영;최홍규;최병숙
    • 조명전기설비학회논문지
    • /
    • 제18권1호
    • /
    • pp.1-8
    • /
    • 2004
  • 오늘날 축구는 세계적인 주목을 받는 스포츠가 되었다. 특히, 2002 KOREA-JAPAN 월드컵은 한국에 대한 깊은 인상을 심어 주었다. 축구경기장의 조명시스템 설계에 있어서 가장 주요한 기술적 목적은 경기장의 어디에서나 최적의 분포를 나타내도록 하는 것이다. 이렇듯, FIFA는 경기장의 어디에서나 선수, 청중, 방송관계자등에게 일정한 수준의 조도를 제공할 수 있도록 규정하고 있다. 본 논문에서는 경기장의 조명타워의 위치선정에 따른 최적의 수평면 조도와 수직면 조도를 찾기 위한 알고리즘을 제시하였다. 본 논문에서는 Philip's Calculux 프로그램을 이용하여 조명타워의 위치에 따라 수평면 조도, 수직면 조도, 균제도, 글레어 등을 계산하였다.

사무소를 위한 조명설계 자료의 개발과 검증 (조명에너지와 냉방부하를 중심으로) (Verification and Development of Lighting Design Data for Office in Korea (Focused on the Evaluation of Lighting Energy and Cooling Load))

  • 김은희;서승직
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2006년도 하계학술발표대회 논문집
    • /
    • pp.1043-1048
    • /
    • 2006
  • This paper aimed to verify and develop lighting design data for offices in Korea. It focused on a Korean standard office value relative to lighting density and the evaluation of lighting energy and cooling load. When planning indoor lighting design, we generally utilize the lighting density value which is set $14W/m^2$ by the ASHRAE/IES standard office value. However, the value is not appropriate to apply in Korea where higher efficiency lamps are more popular than others. For calculation of a proper lighting density of Korea, we analysed distribution curves of luminous intensity(2-lamp fluorescent lighting fixture with Parabolic) and derived the new lighting density $12.64W/m^2$ as Korea standard office value. In the simulation using this value, it was shown that lighting energy and cooling load could be reduced.

  • PDF

식물 성장용 LED조명 모듈 및 제어 시스템 개발에 관한 연구 (A Study on Development of LED Lighting Module and Control System for Plant Growth)

  • 이승민;이완범
    • 반도체디스플레이기술학회지
    • /
    • 제18권4호
    • /
    • pp.105-109
    • /
    • 2019
  • LED lighting is used as artificial lighting for plant growth because it has high light efficiency and can radiate light of various wavelengths. In this paper, we have developed new structure LED lighting module to improve the performance of LED lighting for plant growth and proposed a lighting control system that can be controlled wirelessly. The proposed LED lighting module was fabricated using optical lens applied to tunnel light and simulated using Relux program. Results of simulation, we confirmed that the light distribution and average illuminance of the proposed lighting were improved. LED lighting control system was developed to wirelessly control R, G, B, W LED lighting according to plant type and growing season. Therefore, it is expected to provide the optimal lighting environment for plant growth and contribute to the improvement of farm productivity and convenience.