• Journal of Advanced Marine Engineering and Technology
• /
• 제31권3호
• /
• pp.282-292
• /
• 2007

The present paper describes the results of high speed photography, acoustic emission (AE) detection and plasma light emission (LE) measurement during $CO_2$ laser welding of 304 stainless steel in different processing conditions. Video images with high spatial and temporal resolution allowed to observe the melt dynamics and keyhole evolution. The existence of keyhole was confirmed by the slag motion on the weld pool. The characteristic frequencies of flow instability and keyhole fluctuations at different welding speed were measured and compared with the results of Fourier analyses of temporal AE and LE spectra. The experimental results were compared with the newly developed numerical model of keyhole dynamics. The model is based on the assumption that the propagation of front part of keyhole into material is due to the melt ejection driven by laser induced surface evaporation. The calculations predict that a high speed melt flow is induced at the front part of keyhole when the sample travel speed exceeds several 10 mm/s. The numerical analysis also shows the hump formation on the front keyhole wall surface. Experimentally observed melt behavior and transformation of the AE and LE spectra with variation of welding speed are qualitatively in good agreement with the model predictions.

• 소성∙가공
• /
• 제23권1호
• /
• pp.41-48
• /
• 2014

The light guide plate has become the major component for the backlight module in general information technology products (e.g. mobile phones, monitors, etc.). High speed injection molding has been adopted for thin walled LGP giving advantages such as weight, shape, size, and reduction in production costs. In the current study, the rheological characteristics of high liquidity plastic resin PC(HL8000) were measured using a capillary rheometer to improve the reliability of the numerical analysis for high speed injection molding. With the measured viscosity and PVT of PC(HL8000), numerical analysis of injection molding was conducted using the simulation software(Moldflow). Filling time and deflection were predicted and compared with those of traditional PC resins(H3000, H4000). The results show that PC(HL8000) has significantly different rheological characteristics during high speed injection molding. Hence proper properties of the resin should be used to improve the accuracy of numerical predictions.

• 한국화재소방학회논문지
• /
• 제29권3호
• /
• pp.31-36
• /
• 2015

본 연구는 동일 비율로 휘발유와 혼합된 인화성 액체 200 ml를 축소 모의된 구획 공간에 채우고 착화시켰을 때의 특성을 해석하였다. 구획된 공간의 한 변은 2,000 mm이며, 연소가 진행된 장치의 길이는 1,000 mm이다. 휘발유와 알코올을 혼합한 물질의 화염 전파 속도가 0.7 s로 가장 빠르고, 가장 늦은 물질은 휘발유와 경유를 혼합한 물질로 1.2 s이다. 화염이 최성기에 가장 빨리 도달한 물질은 휘발유와 아세톤을 혼합한 것으로 25.5 s가 소요되었다. 또한 휘발유와 경유를 혼합한 물질은 163.7 s로 가장 늦었다. 연소의 지속 시간은 휘발유와 경유를 혼합한 물질이 332.7 s로 가장 길었으며, 가장 짧은 것은 휘발유와 시너를 혼합한 물질로 121.5 s이다. 따라서 화재 현장을 조사하는 화재조사관은 최초 목격자의 진술은 물론 화염의 특성을 종합적으로 분석할 필요가 있다.

• 대한후두음성언어의학회지
• /
• 제21권2호
• /
• pp.133-138
• /
• 2010

Background and Objectives : High-speed imaging can be useful in studies of linguistic and artistic singing styles, and laryngeal examination of patients with voice disorders, particularly in irregular vocal fold vibrations. In this study, we introduce new laryngeal imaging systems which are commercially available high speed cameras connected with a laryngoscope. Materials and Method : The laryngeal images were captured from three different types of cameras. First, the adapter was made to connect with laryngoscope and Casio EX-F1 to capture the images using $2{\times}150$ Watt Halogen light source (EndoSTROB) at speeds of 1,200 tps (frame per second)($336{\times}96$). Second, Phantom Miro ex4 was used to capture the digital laryngeal images using Xenon Nova light source 175 Watt (STORZ) at speeds of 1,920 fps ($512{\times}384$). Finally, laryngeal images were captured using MotionXtra N-4 with 250 Watt halogen lamp (Olympus CLH-250) light source at speeds of 2,000tps ($384{\times}400$) by connecting with laryngoscope. All images were transformed into the Kymograph using KIPS (Kay's image processing Software) of Kay Pentex Inc. Results: Casio EX-F1 was too small to adjust the focus and screen size was diminished once the images were captured despite of high resolution images. High quality of color images could be obtained with Phantom Miro ex4 whereas good black and white images from Motion Xtra N-4 Despite of some limitations of illumination problems, limited recording time capacity, and time consuming procedures in Phantom Miro ex4 and Motion Xtra N-4, those portable devices provided high resolution images. Conclusion : All those high speed cameras could capture the laryngeal images by connecting with laryngoscope. High resolution images were able to be captured at the fixed position under the good lightness. Accordingly, these techniques could be applicable to observe the vocal fold vibration properties in the clinical practice.

• 한국운동역학회지
• /
• 제31권3호
• /
• pp.162-167
• /
• 2021

Objective: This study aimed to identify the different wind speed categories and competitive level among windsurfers through GPS variables to provide the useful information on the development of training programs for enhancing windsurfers' performance. Method: Data from 69 female athletes who participated in 27 races during the 2018-2019 windsurfing season were used for the analysis. Average board speed, total race time, total distance, upwind race time, downwind race time, beam reach race time were collected through GPS. Unconfirmed data were excluded along with penalty point data. The wind conditions were classified as light, light to medium, medium, medium to heavy, and heavy wind, the competitive levels were classified as level 1, level 2, and level 3. Results: As for the average board speed, the level 1 or level 2 group showed higher board speed than the level 3 group in all wind conditions except for the light wind. The total race time and upwind race time showed less time in level 1 or level 2 group than level 3 group in all wind conditions. The total distance, downwind race time and beam reach race time showed less distance and time in level1 group than level 3 group under sufficient wind conditions. Conclusion: Our results show that the aerobic capacity to sustain pumping during upwind course in wind conditions below 15 kts effects performance. In wind conditions of 15 kts or more, indicated that the board control for the fast board speed and small distance required during up, down, beam reach courses had an effect on competition performance. This information can be provided to windsurfers and coaching as basic data for training programs to improve performance.

• 생물환경조절학회지
• /
• 제5권2호
• /
• pp.160-166
• /
• 1996

김등과 Kim등이 재발한 공정묘 생산용 풍동을 사용하여, 인공광하의 묘개체군내외에서 기온, 상대습도 및 포차(vapour pressure deficit) 등의 미기상 특성에 미치는 기류속도의 효과를 분석하였다. 기온차의 최고치가 초장 근처에서 나타났으며, 이러한 결과는 공정묘의 생육이 진행될수록 더욱 분명하게 나타났다. 묘개체군 내부에서는 배지 또는 엽으로부터의 증발산으로 인하여 개체군 외부에서의 기온에 비해서 0.7-l.4$^{\circ}C$ 정도 낮게 나타났는데, 기류속도가 낮을수록 기온차가 높게 나타났다. 묘개체군 내부의 상대습도 분포에 미치는 기류속도의 영향이 매우 큰 것으로 나타났다. 기류속도가 증가할수록 묘개체군 내외에서의 상대습도차는 작게 나타났는데, 이것은 기류속도의 증가에 따라 엽에서의 water potential이 감소되었기 때문인 것으로 판단된다. 배지표면으로부터의 높이가 증가함에 따라 포차가 증가하였다. 이와 같은 결과는 수증기 유속의 흐름이 상방향으로 이루어짐을 의미하는 것이다. 생육단계에 따른 포차의 변화는 엽면적 지수가 클수록 수직방향으로의 기울기가 크게 나타났다. 한편, 후부에서의 상대습도 및 포차는 중앙부에서 보다 약간 낮게 나타났다. 기류속도에 따라 묘개체군의 수직방향 및 기류진행방향으로 기온, 상대습도 및 포차의 기울기가 크게 나타났는데, 이러한 미기상 요소의 기울기는 묘개체군의 불균일 생장을 초래할 수 있다.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 The Third Asian Fuzzy Systems Symposium
• /
• pp.591-595
• /
• 1998

This paper proposes a new concept of optimal shortest path algorithm which reduce average vehicle wating time and improve average vehicle speed, Electro sensitive traffic system can extend the traffic cycle when three are many vehicles on the road or it can reduce the traffic cycle when there are small vehicles on the road. But electro sensitive traffic light system doesn't control that kind of function when the average vehicle speed is 10km -20km. Therefore, in this paper to reduce vehicle waiting time we developed design of traffic cycle software tool that can arrive destinination as soon as possible using optimal shortest pass algorithm. Computer simulation result proved 10%-32% reducing average vehicle wating time and average vehicle speed which can select shortest route using built in G.P.S. vehicle is better than not being able to select shortest route function.

• International Journal of Automotive Technology
• /
• 제5권3호
• /
• pp.173-180
• /
• 2004

An intensive study was conducted for the crash worthy structural design of the recently developed Korean High Speed Train (KHST). Two main design concepts were set up to protect both crews and passengers from serious injury in heavy collision accidents, and to reduce damage to the train itself in light collision accidents. A collision against a movable 15-ton rigid obstacle at 110 kph was selected from train accident investigations as the accident scenario for the heavy collisions. A train-to-train collision at the relative velocity of 16 kph was used for the light collision. The crashworthiness behaviors of KHST were numerically evaluated using FEM. Analysis results using 1-D collision dynamics model of the full rake consist and 3-D shell element model of the front end structure showed good crashworthy responses in a viewpoint of structural design. Occupant analyses and sled tests demonstrated that KHST performed well enough to protect occupants under the considered accident scenarios. Finally our numerical approaches were evaluated by a real scale collision test.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1722-1728
• /
• 2007

This study analysed testing method for performance verification in the phase of signalling system development for application in the Light Rail Transit(LRT). The main focus in this study therefore includes development of vehicle location detection system by first GPS and analysis of performance verification method by field testing. The comprehensive testing method has been analysed for the signalling system for LRT high speed operation. The signalling system for LRT high speed operation deals with vehicle location identification through vehicle location information using the second GPS and decision for whether the high speed proceed signal and departure inhibition output is feasible or not and for signalling output to the corresponding vehicle.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.65-68
• /
• 2003

This study is intended to look into the influence of environment and construction factor on bleeding of concrete. According to the results, as wind is light, relative humidity is high and temperature is low, the amount of bleeding increases greatly, and evaporation speed is influenced greatly by order of wind, temperature and humidity. As the properties of bleeding by construction factor, the amount of bleeding increases with an increase of placing thickness, but the bleeding ratio, the amount of bleeding per unit volume, increases with a decrease of the placing thickness. Bleeding speed is fastest at about 90 minute after placing concrete. Also, as wind is light, relative humidity is high, temperature is low and the placing thickness is thick, bleeding speed grow faster.