• 융복합기술연구소 논문집
• /
• 제2권1호
• /
• pp.24-30
• /
• 2012

In this study, the trucks(2.9-liter) have been developed to use DME as fuel, and performance test of the vehicle's DME engine, power, emissions, fuel economy and vehicle aspects was conducted. For experiments, the fuel system(common-rail injectors and high-pressure pump included) and the engine control logic was developed, and ECU mapping was performed. As a result, the rail pressure from 40MPa to approximately 65% increase compared to the base injector has been confirmed that. Also, the pump discharge flow is 15.5 kg/h when the fuel rail pressure is 400rpm(40 MPa), and the pump discharge flow is 92.1 kg/h when the fuel rail pressure is 2,000rpm(40MPa). The maximum value of full-load torque capability is 25.5kgfm(based on 2,000rpm), and more than 90% compared to the level of the diesel engine were obtained. The DME vehicle was developed in this study, 120 km/h can drive to the stable, and calculated in accordance with the carbon-balance method of fuel consumptions is 5.7 km/L.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2718-2725
• /
• 2011

The VAL 208 in Uijeongbu Light Rail system is a light railway vehicle which could be operated in driverless supported by Siemens. It is a Rubber Wheel Type AGT (Automatic Guideway Transit). It will be operated in two car train about 11km of Uijeongbu line. In this paper, the technical overview of the ATC system and the interface between the system and the way side control equipments are presented. It includes the main functions of OBCU(On Board control Unit) and its information sharing method with WCU(Way side control Unit). The testing procedure of OBCU is also discussed.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.1118-1123
• /
• 2004

Launched in 1999 and funded by the Korean government, the R&D project of developing the. light train system technology is finally wrapped up to produce its prototype train prototype and all the research activities on signal, communication, power supply third rail Type and infra-structure have been completed. In an attempt to verify the usability of the system through an actual testing and as a preliminary step to the application of the system to overall light train construction projects to be implemented in different cities in Korea, testing lines are under construction now. Here we'd like to introduce people to the general overview of the test line construction and interface found in the process of project.

• 한국산학기술학회논문지
• /
• 제16권2호
• /
• pp.927-939
• /
• 2015

오늘날 산업 기술의 발달에 따른 고도화로 인해, 고속철도로 대변되는 전국망 철도 운영과 함께, 도시 내 또는 교외의 단거리 구간을 운영하는 철도사업에 관심이 증대되고 있다. 특히, 일반철도라 불리는 기존의 중전철에 비해서, 후자의 경우는 단거리 운행에 따른 특성으로 경량전철의 형태로서, 보다 작은 규모의 철도차량 및 역사(정거장)으로 운영이 가능할 것으로 기대되고 있다. 또한 철도차량의 무인화 운행 및 정거장 운영 인력의 감축도 주요 관심사로 부상하고 있다. 하지만, 경량전철시스템의 기반 시설인 역사의 경우, 시설을 시공하는데 있어서 기존의 중전철의 설계지침 및 관련법에 의해 건설되고 있다. 따라서 이러한 지침에 의해 건설되는 역사는 소형화의 추구 방향과는 거리가 있게 된다. 경량전철 역사의 슬림화 목적을 달성하기 위해서는 단순히 건축학적 의미 이상의 접근이 필요하다. 왜냐하면 경량전철은 다양한 시스템이 내재된 복합구조의 시스템이기 때문이다. 따라서, 역사의 슬림화를 추구하면서 열차무인운행에 대한 안전성까지 확보하기 위해서는 시스템 설계에서 체계적인 접근이 필요하다. 특히, 경전철 역사에 대한 설계지침 및 관련법이 국내에 현재까지는 없는 실정이다. 이러한 문제점을 해결하기 위해 본 연구에서는 역사 기능실의 소형화에 대한 연구를 수행하였다. 구체적으로 설계구조행렬(DSM)의 개선된 기법을 제안하였으며, 이의 적용을 통해 역사 기능실 구조설계에서 구성품 통합에 의한 소형화 방법을 연구하였다. 본 연구에서 제안하는 기법을 기반으로 경전철 역사의 기능실 통합을 통한 슬림화 설계를 수행한다면, 향후 경전철역사 건설에서 상당한 시간, 공간, 예산 절감 등의 효과가 기대된다.

• 대한교통학회:학술대회논문집
• /
• 대한교통학회 1999년도 제36회 학술발표회논문집
• /
• pp.85-89
• /
• 1999

• 기술사
• /
• 제39권2호통권185호
• /
• pp.46-50
• /
• 2006

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권3호
• /
• pp.351-358
• /
• 2006

The capability of high pressure injection with small fuel quantify at all engine operating conditions is one of the main feature in common rail fuel injection system, which is used in small and light-duty Diesel engine. The key parameter for the better atomized fuel sprays and multiple injections of this common rail fuel injection control, that can be freely selected irrespective of the engine speed and load is the mechanism controlling the needle energizing and movement in high pressure Diesel injector. In the electro-hydraulic injector, the injection nozzle is being opened and closed by movement of the injector's needle which is balanced by pressure between the nozzle seat and the needle control chamber. This study describes the macroscopic spray structure characteristics of the common rail Diesel injectors with different electric driving method i.e. the solenoid-driven and piezo-driven type. The macroscopic spray characteristics such as spray tip speed. spray tip penetration and spray cone angle were investigated by the high speed spray, which is measured by the back diffusion light illumination method with optical system for the high speed temporal photography in a constant volume chamber pressurized by nitrogen gas. As the results, the prototype piezo-driven injector system was designed and fabricated for the first time in domestic case and the effect of injector's needle response driven by different drive type was compared between the solenoid and piezo-driven injector It was found therefore. that the piezo-driven injector showed faster needle response and had better needle control capability by altering the electric input value than the solenoid-driven injector.

• 대한토목학회논문집
• /
• 제30권1A호
• /
• pp.45-52
• /
• 2010

본 연구는 AGT 시스템의 콘크리트 주행면에 발생할 수 있는 요철이 교량 구조물에 미치는 영향을 파악하고자 경북 경산의 경량전철 시험선 중 30 m P.S.C. 교량을 대상으로 지간 중앙에 10 mm의 단차를 설치하여 교량에 가해지는 충격량을 실험을 통해 확인하였다. 아울러 이미 개발된 컴퓨터 시뮬레이션 프로그램과 실험을 비교하여 시뮬레이션 프로그램의 실무 적용 가능성을 평가하였다. 실험 결과 콘크리트 주행면에 단차가 있는 경우 교량 변위는 미약하게 증가하였으나 가속도 응답은 5 km/h의 주행속도에서는 평균 345%, 20 km/h부터 60 km/h까지는 평균 50%가 증가하여 콘크리트 주행면 단차가 교량에 과도한 충격 및 진동을 유발하여 교량 내구성에 악영향을 미칠 수 있음을 확인하였다. 아울러 개발된 AGT 차량 및 교량 동적 상호작용 해석 프로그램으로 단차에 의한 교량 변위 및 가속도 응답 해석을 수행한 결과 실험과 유사한 응답 시뮬레이션이 가능하였다. 이는 추후 AGT 교량 설계와 AGT 콘크리트 주행면 관리를 위한 기준 설정에 효과적으로 활용할 수 있음을 확인하였다.

• 기술사
• /
• 제40권6호
• /
• pp.59-64
• /
• 2007

LRT(LAght Rail Transit) system is a new transportation system with new technique of an electric railway. Transportation ability of LRT is mid-scale of a bus and a subway, transporting 5,000-30,000 people per hour and direction. LRT automatically operates in the existing metropolitan railway and large-scale development areas or satellite cities with a fixed route and has a short interval that guarantees scheduled-time, safety and environment-friendly.

• 한국연소학회:학술대회논문집
• /
• 대한연소학회 2003년도 제27회 KOSCO SYMPOSIUM 논문집
• /
• pp.251-256
• /
• 2003

The capability of pilot injection with small fuel quantity at all engine operating conditions is one of the main feature of the common rail system. The purpose of the pilot injection is to lower the engine noise and to reduce the NOx emissions. This study describes the pilot spray structure characteristics of the common-rail diesel injectors, solenoid-driven and piezo-driven type, with different electric driving characteristics So, three common-rail injectors with different electric current wave were used in this study. The pilot spray characteristics such as spray speed, spray tip penetration, and spray angle were obtained by spray images, which is measured by the back diffusion light illumination method with optical system for high-speed temporal photography. Also the CFD analysis was carried out for fuel behavior under high pressure in between needle and nozzle of solenoid-driven injector to know the condition of initial injection at experiment test. It was found that pilot injection of common-rail system was effected by rate of injection and temperature of injected fuel and electrical characteristic of the driven injector.