• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.156-156
• /
• 2010

We have developed highly efficient blue phosphorescent organic light-emitting devices (OLED) with simplified architectures using blue phosphorescent material. The basis device structure of the blue PHOLED was anode / emitting layer (EML) / electron transport layer (ETL) / cathode. The dopant was partially doped into the host layer for investigating recombination zone, current efficiency, and emission characteristics of the blue PHOLEDs.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.05a
• /
• pp.217-218
• /
• 2012

To prevent energy waste in buildings used heat insulator. Heat insulator materials can be classified inorganic and organic. The organic material is be toxic gas emission, when a fire occurs. And it has lower water resistance. The inorganic material is heavy and worse thermal performance than organic materials. This study focused on thermal conductivity and density of inorganic foam material for using industrial by-products materials.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.439-442
• /
• 1998

In this paper, organic thin film LED(light emitting diode) having ITO glass/Alq$_3$/Al structure using an Alq$_3$ was fabricated by the vacuum evaporation and the absorbance, wave length, I-V characteristics were investigated, Electroluminescence of green and wavelength of 510[nm] were observed in this device. We observed absorbance form 320[nm] to 430[nm] and knew unstability of Alq$_3$ material as light emitting device.

• KIEAE Journal
• /
• v.15 no.2
• /
• pp.79-86
• /
• 2015

Purpose: The concept of the tectonic has researched to find out the identify of modern architecture. The meaning of traditional tectonic knowledge to emphasize structural joints and attention to detail in creativity has developed in various ways in contemporary architecture. The purpose of this study is to analyze the tectonic characteristics and architectural expressions of the light appeared in the works of Santiago Calatrava. Major features in his works could be found is to maximize structural beauties through deducing the architectural images from the nature and expressing the material properties and the kinetic structures, and thus, to ultimately create the functional space and form by connecting the light to the tectonic structure. Method: Accordingly, I tried to analyze the three works of Santiago Calatrava (the Milwaukee Art Museum, the Bodegas Ysios Winery and the City and Arts and Sciences) as following categories - the structural aesthetics, the expression of material properties, the relationship between he kinetic structures and the light. Result: According to the results of the study, Santiago Calatrava tried to create his own architectural aesthetic by combining structural tectonic with nature, material, regional place and culture. He also sought to express the tense and dynamic tectonic rather than the stable one in his works.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.2
• /
• pp.217-222
• /
• 2004

The white-light-emitting organic LED(OLED) with two-wavelength was fabricated using the DPVBi of blue emitting material and a series of orange color fluorescent dye(Rubrene) by vacuum evaporation processes. The basic structure of white-light-emitting OLED was ITO/NPB(150$\AA$)/DPVBi/Rubrene/BCP(100$\AA$)/Alq$_3$(150$\AA$)/Al(600$\AA$). We analyzed the fabricated device through the changes of the DPVBi and Rubrene layer's thickness. We obtained the white-light-emitting OLED with white color light and the CIE coordinate of the device was (0.29, 0.33) at applied voltage of 13V when the thickness of DPVBi layer was 210$\AA$ and the thickness of Rubrene layer was 180$\AA$. At a current of 100㎃/$\textrm{cm}^2$, the quantum efficiency was 0.35％ and at a voltage of 20V, it was 0.405％.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.2
• /
• pp.102-107
• /
• 2019

The vehicle market has developed environment-friendly vehicles to comply with fuel economy regulations and exhaust regulations that have become stricter and stricter over time. Many studies have been conducted to improve the travel performance and fuel economy of environment-friendly vehicles, and vehicle manufacturers have been studying how to manufacture light-weight vehicles in order to improve the fuel economy of both existing vehicles and the newer environment-friendly vehicles. Exemplary light-weight vehicle technologies optimizes the design of the vehicle body structure, which is a vehicle weight-reducing method that modifies component shapes or layouts to optimize the structure of the vehicle. In addition, the new process technology uses new light-weight and very strong materials, and not typical materials, to manufacture light-weight vehicles. This study aims at the optimal design of vehicle body structures using multi-materials for the Fender-Apron, which is an important frame member for the external front side of a vehicle body, by conducting FEA (Finite Element Analysis) and multi-material bonding.

• Tribology and Lubricants
• /
• v.38 no.6
• /
• pp.247-254
• /
• 2022

Chemical mechanical polishing (CMP) is a hybrid surface-polishing process that utilizes both mechanical and chemical energy. However, the recently emerging semiconductor substrate and thin film materials are challenging to process using the existing CMP. Therefore, previous researchers have conducted studies to increase the material removal rate (MRR) of CMP. Most materials studied to improve MRR have high hardness and chemical stability. Methods for enhancing the material removal efficiency of CMP include additional provision of electric, thermal, light, mechanical, and chemical energies. This study aims to introduce research trends on CMP using ultraviolet (UV) light to these methods to improve the material removal efficiency of CMP. This method, photocatalysis-assisted chemical mechanical polishing (PCMP), utilizes photocatalytic oxidation using UV light. In this study, the target materials of the PCMP application include SiC, GaN, GaAs, and Ru. This study explains the photocatalytic reaction, which is the basic principle of PCMP, and reviews studies on PCMP according to materials. Additionally, the researchers classified the PCMP system used in existing studies and presented the course for further investigation of PCMP. This study aims to aid in understanding PCMP and set the direction of future research. Lastly, since there have not been many studies on the tribology characteristics in PCMP, research on this is expected to be required.

• Korean Journal of Materials Research
• /
• v.29 no.1
• /
• pp.23-29
• /
• 2019

Three-dimensional(3D) printing is a process for producing complex-shaped 3D objects by repeatedly stacking thin layers according to digital information designed in 3D structures. 3D printing can be classified based on the method and material of additive manufacturing process. Among the various 3D printing methods, digital light processing is an additive manufacturing technique which can fabricate complex 3D structures with high accuracy. Recently, there have been many efforts to use ceramic material for an additive manufacturing process. Generally, ceramic material shows low processability due to its high hardness and strength. The introduction of additive manufacturing techniques into the fabrication of ceramics will improve the low processability and enable the fabrication of complex shapes and parts. In this study, we synthesize silica composite material that can be applied to digital light processing. The rheological and photopolymeric properties of the synthesized silica composite are investigated in detail. 3D objects are also successfully produced using the silica composite and digital light processing.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.178-181
• /
• 2001

The organic light-emitting devices (OLEDs) based on fluorescence have low efficiencies due to the requirement of spin-symmetry conservation. By using the phosphorescent material, the internal quantum efficiency can reach 100 %, compared to 25 % in the case of the fluorescent material. Thus, the phosphorescent OLEDs have recently been extensively studied and showed higher internal quantum efficiencies then the conventional OLEDs. In this study, we investigated the characteristics of the phosphorescent OLEDs, with the green emitting phosphor, Ir(ppy)$_3$ (tris(2-phenylpyridine)iridium). The devices with a structure of ITO/TPD/Ir(PPy)$_3$ doped in the host material/BCP/Alq$_3$/Li:Al/Al were fabricated, and its electrical and optical characteristics were studied. By changing the doping concentration of Ir(PPy)$_3$ and the host materials, we fabricated several devices and investigated the device characteristics.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.264-264
• /
• 2009

The sensitivity lighting of pendant type used Micro-controller AVR, embodiment method for Munsell chromaticity diagram system and adoption method for light source lens respectively. About a plan design of light fixture, LED circuit designed flow chart of circuits and LED driver of organizations in electron device. For used Solidworks soft ware program, LED light source must take a heat shink part and LED light fixture module for sensitivity lighting of pendant type into considerations