• Electrical & Electronic Materials
• /
• v.10 no.6
• /
• pp.576-580
• /
• 1997

In this paper, the viewing angle characteristics of amorphous (a) - twisted nematic (TN)-liquid crystal display (LCD) on poly(vinyl)cinnamate (PVC) surface with UV (ultraviolet) light irradiation were investigated. It was found that the threshold voltage increases with increasing the polymerization of PVC surfaces. We observed that the domain size of a-TN-LCD decreases with increasing the photo polymerization by increasing UV light irradiation time on PVC films. Also, we observed that the viewing angle of a-TN-LCD increased with increasing the photo polymerization on PVC surfaces. Finally, we consider that the viewing angle of a-TN-LCD on PVC surfaces is large compared to a-TN-LCD on polyimide (PI) surface.

• Journal of the Korean Applied Science and Technology
• /
• v.16 no.4
• /
• pp.281-286
• /
• 1999

We carried out this subject to observe photoisomerization using 8A5H and phospholipid(DLPC) containing azobenzene group which has reversible to cis-trans by light irradiation. We investigated the photoisomerization and property of the monolayer film on quartz substrate prepared by the mixture of 8A5H and phospholipid deposited using Langmuir-Blodgett(LB) method. It was found that the absorption spectrum of the 8A5H and phospholipid LB monolayer was induced to photoisomerization by alternate light irradiation. And the absorbance of both the solution of mixtures of 8A5H-phospholipid and LB film was reversibly changed by the acid-base exposure and alternate temperatures.

• Journal of the Korean Applied Science and Technology
• /
• v.15 no.1
• /
• pp.55-62
• /
• 1998

The absorption spectra of polyamic acid containing p-methoxyazobenzene in a mixture of N, N-dimethylacetamide(DMAC) and benzene(1:1 by volume) solution was induced photoisomerization by UV and visible light irradiation. This solution is influenced on temperature according to measure by UV-Vis Spectrophotometer. Ultra thin film of polyamic acid containing p-methoxyazobenzene was prepared on the hydrophilic quartz plate by Langmuir-Blodgett(LB) method. The precursor LB film was heated in a vacuum dry oven at $120^{\circ}C$ in order to convert it into the LB film of polyimide. The absorption spectra of LB films were also induced photoisomerization by UV and visible light irradiation.

• Nuclear Engineering and Technology
• /
• v.38 no.5
• /
• pp.417-422
• /
• 2006

The present paper describes the 45 MW High Flux Reactor (HFR) which is located in Petten, The Netherlands. This paper focuses on selected technical aspects of this reactor and on nuclear fuel irradiation experiments. These fuel experiments are mainly experiments on Light Water Reactor (LWR) and Very/High Temperature Reactor (V/HTR) fuels, but also on Fast Reactor (FR) fuels, transmutation fuels and Material Test Reactor (MTR) fuels.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.11
• /
• pp.1179-1184
• /
• 1998

Mesogenic and azo monomers were synthesized and copolymerized to obtain two copolymers composed of methacrylate and itaconate backbone. Glass transition temperatures of the copolymers were found to be slightly higher than ambient temperature. Both the copolymers showed liquid crystalline properties. Trans-cis isomerization in film state was observed under UV-irradiation with a light of 365 nm. Regarding the photochemical phase transition behavior, the transition rate of nematic-to-isotropic state was slightly faster in the methacrylate copolymer during irradiation at 365 nm and the rate of the reverse transition was much faster in itaconate copolymer under thermal effect.

• Food Science of Animal Resources
• /
• v.31 no.4
• /
• pp.596-602
• /
• 2011

The objective of this study was to analyze the pattern recognition of volatile compounds from different types of milk under LED (Light Emitting Dioxide) irradiation for 6 d. Yellow, red, blue, dark, and fluorescent light were produced using LED equipment. A mass spectrometry-based electronic nose and DFA (discriminant function analysis) were used to determine the change in volatiles from different types of milk under LED irradiation. As the LED exposure time was increased, DF1 of whole milk changed considerably under blue light, while that of skim milk changed significantly under red and yellow light irradiation. Among the types of milk tested, the most light-induced oxidation sample was LTLT milk under blue light. The volatile compounds that were shown to increase due to LED treatment in the electronic nose analysis, which was based on MS, were mainly acetaldehyde, propanal, pentanal, hexanal, heptanal, nonanal, 3-methyl butanal, 2-methyl propanal, 2-butanone, 2-pentanone, 2-hexanone, and 2-heptanaone and 2-nonanone.

• Journal of Korean Physical Therapy Science
• /
• v.6 no.3
• /
• pp.63-82
• /
• 1999

Recent studies have revealed that Nitric oxide(NO) was one of the demonstration for the physiological regulator, endothelial derived relaxing factor(EDRF) and that NO was produced by ultraviolet irradiation in human. Thus, the present author have carried out a experimental study on the change of hematological, histological value of ultraviolet irradiation in sprague-dawley rats. The subjects were divided into four groups of ten rats each selected at random. There were 4 groups: 1. no irradiation control; 2. ultraviolet $75mJ/cm^2$ irradiation group; 3. ultraviolet $150mJ/cm^2$ irradiation group; 4. ultraviolet $225mJ/cm^2$ group. After a irradiation, hematological and histological tests were performed to observe erythrocyte, hemoglobin, hematocrit, MCH, MCHC, MCV, $O_2$ saturation, pH, $PO_2,\;PCO_2$ value and to observe histological changes. In hematological tests, erythrocyte, hemoglobin, hematocrit significantly increased in $75mJ/cm^2$ than control group and more $150mJ/cm^2$ ultraviolet irradiation group respectively. Also In blood gas tests, $PO_2$ significantly increased in $75mJ/cm^2$ and more $150mJ/cm^2$ group than control group. Whereas $PCO_2$ significantly decreased in $75mJ/cm^2$ and more $150mJ/cm^2$ group than control group (Duncan-Tukey test, P<0.05). In histological tests, control and $75mJ/cm^2$ group unchanged, but more $150mJ/cm^2$ group changed that it was cytolysis, cytotoxic effect, acanthosis, proliferation of keratinocyte, appearance of amorphous cell and pyknotic nucleus, production of sunburn cell. In conclusion, the present author results support the importance of the relation between NO effect and hematological, histological value by ultraviolet B irradiation.

• Korean Journal of Veterinary Research
• /
• v.34 no.4
• /
• pp.665-678
• /
• 1994

This study was undertaken to investigate histological changes according to the radiosensitivity in the spermatogenic cells in Korean native pheasants. During spermatogenetic period, testes wete collected from male adult Korean native pheasant and they were used as experimental and control birds. The experimental group was divided into a single-dose whole body irradiation group(400, 600, 800 and 1000 rads) and a split-dose whole body irradiation groups(400/2, 600/2, 800/2 and 1000/2 rads). A Henseky's $^{60}Co$ ${\gamma}$-radiotherapy machine was used for this experiment and the dose rate of $^{60}Co$ ${\gamma}$-ray was 104 rads/min. The experimental birds were sacrificed at 24 and 72 hrs after irradiation and the control pheasants were sacrificed at the same time. General histological changes of seminiferous epithelial cells were observed by hematoxylin-eosin stain with light microscope. The results obtained are summarized as follows ; 1. In the single-dose and the split-dose irradiation groups, the average diameter of the seminiferous tubule was decreased compared with control group. 2. Seminiferous epithelial cells were more severely damaged after 72 hrs than after 24 hrs of single-dose irradiation of 400, 600 and 800 rads but the difference of cell injury was almost not observable with the elapsed time in the group of the single-dose irradiation of 1000 rads. 3. The damage of spermatogenic cells were more severe after 24 hrs than after 72 hrs of the split-dose irradiation of 400 rads but the split-dose irradiation of 600, 800 and 1000 rads were more severe after 72 hrs than after 24 hrs.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.3
• /
• pp.343-357
• /
• 1999

The color change of maxillofacial silicone has been attributed to certain environmental factors such as exposure to the UV component of natural sunlight, wetting and drying of the elastomer and surface abrasion resulting from the application and removal of cosmetics. The purpose of this study was to evaluate the color change of maxillofacial silicone (Silastic MDX4-4210) according to type of pigment (cadmium yellow, titanium white, cosmetic red), and UV absorber application method after 200, 400, and 600 hours of 350nm UV light irradiation. The results were as follows. 1. According to type of pigments, after 200 hours cosmetic red showed significantly larger color change than cadmium yellow and titanium white, and after 400 and 600 hours color change significantly decreased in the order of cosmetic red, cadmium yellow, and titanium white (p<0.05). 2. In the cadmium yellow group, after 200 hours, the non-treatment group showed significantly larger color change, but after 400 and 600 hours, color change significantly decreased in the order of non-treatment, surface application and mixed group (p<0.05). 3. In the titanium white group, there was no significant color change difference between the three groups after 200 and 400 hours, but after 600 hours, the mixed group showed significantly smalt or color change than the non-treatment and surface application groups (p<0.05). 4. In the cosmetic red group, there was significant decrease in color change in the order of non-treatment, surface application and mixed group (p<0.05). From the results above, the effect of UV light absorber differed according to the type of pigment, but mixing UV light absorber with maxillofacial silicone is thought to give superior resistance against UV light irradiation in the long run.

• Korean Journal of Clinical Laboratory Science
• /
• v.47 no.1
• /
• pp.6-10
• /
• 2015

Photodynamic therapy (PDT) apply photosensitizers and light. The purpose of this study was to evaluate the in vitro efficacy of PDT using blue LED (light emitting diode) with photofrin and radachlorin for Propionibacterium acnes. The colony forming units method was used to assess the antibacterial activity. Suspension (1 mL) containing P. acnes at $1{\times}10^5CFU/mL$ were prepared and then 2 fold serial diluted to $12.5{\mu}g/mL$ from $50{\mu}g/mL$ concentration of photofrin and radachlorin. After 60 minutes incubation, light was irradiated for 10 to 30 minutes using the following light source of wavelength 460 nm, each energy density 36, 72 and $108J/cm^2$. Bacterial growth was evaluated after 72 hours incubation in a Phenylethanol Blood Agar (PEBA) culture. In addition, flow cytometric analysis were performed to measure the live cell after PDT. Also transmission electron microscopy (TEM) was employed to evaluate the effect of pathogens by PDT. The PDT Group was perfectly killed to all kind of photosensitizers dose of $12.5{\mu}g/mL$ with irradiation of 10 minutes. Also other Groups were killed to all kind of photosensitizers dose of $6.25{\mu}g/mL$ with irradiation time of 20 and 30 minutes. The flow cytometry showed a lower number of viable bacteria in the PDT group compared to the control group. The images of the TEM results were showed in cytoplasmic membrane damage and partially deformed to cell morphologies. These results suggest that radachlorin and photofrin combine blue LED PDT can be effectively treated when was proved treatment for acnes therapy.