• Korean Journal of Heritage: History & Science
• /
• v.52 no.4
• /
• pp.124-141
• /
• 2019

This research explored the relationship between the water quality issue of Wolji Pond (Anapji Pond) with the maintenance of the channel flow circulation system. The water supply and drainage system closely related to the circulation system of pond has been reviewed, rather than the existing water supply and drainage system that has been analyzed in previous studies. As a result of reviewing the water supply system, it has been learned that the water supply system on the southeastern shore of Wolji Pond, being the current water supply hole, has been connected to the east side garden facility (landscaping stone, curved waterway, storage facility of water) between the north and south fence and the waterway. This separate facility group seems to have been a subject of the investigation of the eastern side of Wolji Pond, with the landscaping stones having been identified in the 1920's survey drawings. The water supply facility on the southeastern shore, being the suspected water supply hole, seems to have some connection with the granite waterway remaining on the building site of Imhaejeon (臨海殿) on the southern side of Wolji Pond. It is inferred that it provides clean water, seeing that the slope towards the southwestern shore of Wolji Pond becomes lower, the landscaping stones have been placed in the filter area, and it is present in the 1920's survey drawings and the water supply hole survey drawing of 1975. The water drainage facility on the northern shore is composed of five stages. The functions of the wooden waterway and the rectangular stone water catchment facility seem not to be only for the water drainage of Wolji Pond. In light of the points that there are wood plugs in the wooden waterway and that there is a water catchment facility in the final stage, it is judged that the water of Balcheon Stream (撥川) may be charged in reverse according to this setup. Namely, the water could enter and exit in either direction in the water drainage facility on the northern shore It also seems that the supply to the wooden waterway could be opened and shut through the water catchment facility of rectangular stone group as well. The water drainage facility on the western shore is very similar to the water drainage facility on the northern shore, so it is difficult to avoid the belief that it existed during the Silla Dynasty, or it has been produced by imitating the water drainage facility on the northern shore at some future point in time. It seems to have functioned as the water drainage facility for the supply of agricultural water during the Joseon Dynasty. The water supply and drainage facilities in Wolji Pond have been understood as a systematized distribution network that has been intertwined organically with the facility of Donggung Palace, which was the center of the Silla capital. Water has been supplied to each facility group, including Wolji Pond, through this structure; it includes the drainage system connecting to the Namcheon River (南川) through the Balcheon Stream, which was an important canal of the capital center.

• Journal of Korean Society of Forest Science
• /
• v.85 no.1
• /
• pp.107-119
• /
• 1996

To understand vegetation changes along environmental gradients in the natural forests in the east side of the Cascade Range in Washington state, USA, line transects were used to sample six different forest environments in the Wenatchee National Forest in the north-facing and south-facing sites at 975, 1280 and 1700m elevation. Data were analyzed using ordination by detranded correspondence analysis. Pseudotsuga menziesii was found as one of the dominant species on all the six sites regardless of elevation or aspect, while Pinus ponderosa was dominant on south slopes only. Abies grandis and A. lasiocarpa were dominant species on north slopes at elevations of 1280 and 1700m, respectively. Moisture, as it related to aspect, was identified as one of the most important environmental gradients for explaining the variation of vegetation types. On north-facing slopes, compared to south-facing slopes, where moisture was not as limiting and canopies could grow denser, probably, elevation or competitive interaction was more important. Species diversity tended to decrease with increasing environmental severity, with south slopes having less diversity than north slopes due to extended water stress and harsher temperature extremes on south slopes. The age structure on north-facing and south-facing slopes was different. Light intensity, moisture and climate were different between these two slopes. Large scale disturbances(e.g., big fire or insects) were major causes in changing age structure. Younger trees showed a closer relationship between size and age than adult trees. DBH values of shade intolerant species in south-facing slope were bigger than those of north-facing slope, which suggested that aspect of stands be the most important factor for age and size.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.7
• /
• pp.380-394
• /
• 2015

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2014. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of heat and mass transfer, cooling and heating, and air-conditioning, the flow inside building rooms, and smoke control on fire. Research issues dealing with duct and pipe were reduced, but flows inside building rooms, and smoke controls were newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for thermal contact resistance measurement of metal interface, a fan coil with an oval-type heat exchanger, fouling characteristics of plate heat exchangers, effect of rib pitch in a two wall divergent channel, semi-empirical analysis in vertical mesoscale tubes, an integrated drying machine, microscale surface wrinkles, brazed plate heat exchangers, numerical analysis in printed circuit heat exchanger. In the area of pool boiling and condensing, non-uniform air flow, PCM applied thermal storage wall system, a new wavy cylindrical shape capsule, and HFC32/HFC152a mixtures on enhanced tubes, were actively studied. In the area of industrial heat exchangers, researches on solar water storage tank, effective design on the inserting part of refrigerator door gasket, impact of different boundary conditions in generating g-function, various construction of SCW type ground heat exchanger and a heat pump for closed cooling water heat recovery were performed. (3) In the field of refrigeration, various studies were carried out in the categories of refrigeration cycle, alternative refrigeration and modelling and controls including energy recoveries from industrial boilers and vehicles, improvement of dehumidification systems, novel defrost systems, fault diagnosis and optimum controls for heat pump systems. It is particularly notable that a substantial number of studies were dedicated for the development of air-conditioning and power recovery systems for electric vehicles in this year. (4) In building mechanical system research fields, seventeen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the evaluation of work noise in tunnel construction and the simulation and development of a light-shelf system. The subjects of building energy were worked on the energy saving of office building applied with window blind and phase change material(PCM), a method of existing building energy simulation using energy audit data, the estimation of thermal consumption unit of apartment building and its case studies, dynamic window performance, a writing method of energy consumption report and energy estimation of apartment building using district heating system. The remained studies were related to the improvement of architectural engineering education system for plant engineering industry, estimating cooling and heating degree days for variable base temperature, a prediction method of underground temperature, the comfort control algorithm of car air conditioner, the smoke control performance evaluation of high-rise building, evaluation of thermal energy systems of bio safety laboratory and a development of measuring device of solar heat gain coefficient of fenestration system.

• The Korean Society of Law and Medicine
• /
• v.19 no.2
• /
• pp.139-171
• /
• 2018

The 「Act on Remedies for Injuries from Medical Malpractice and Mediation of Medical Disputes」(hereinafter referred to as 'the Act on Mediation of Medical Disputes') provides that the state should compensate the victims of medical accidents occurred irresistibly in childbirth despite that health and medical service personnel fulfilled their duty of care for their damage within the range of its budget(Article 46 of the Act on Mediation of Medical Disputes). Given that victims of medical accidents could expect demage recovery only through lawsuits thus far, this act can be said to be a groundbreaking act. However, However, as 30% of the costs for such medical accident compensation projects are borne by those who have records of childbirth among the founders of health and medical institutions (Article 21 of the Act on Mediation of Medical Disputes), there has been a question about whether doctors are held responsible despite that the accidents such as the deaths of mothers and newborn babies occurred irresistibly without doctors' fault. However, recently, the Constitutional Court ruled that 'the range of founders of health and medical institutions' and 'share ratios of finances for compensation' in Article 46 (3) of the Act on Mediation of Medical Disputes' related to the imposition of the share of costs are institutional (Constitutional Court ruling dated April 26, 2018, 2015Heonga13, hereinafter referred to as 'the ruling in the case'). Although the ruling in the case was made based on only the principle of statutory reservation and the principle of ban on comprehensive authorization, this paper added a practical judgment. This paper proved that the share of costs in this case has the nature of burden charges in pursuit of study and does not infringe on the property rights of the founders of health medical institutions even in light of the principle of proportionality because there is a legitimate reason for imposing the burden charge. The imposition of the share of costs in the system for compensation for medical accidents occurred irresistibly is against the principle of liability with fault in part. However, the medical accident compensation projects are rational a national policy for the victims of medical accidents and the medical world clearly gains some benefits from the effect to terminate medical disputes. The expansion of finances for compensation through the payments of the share of costs will reduce the suffering and misunderstanding of victims of medical accidents occurred in the process of childbirth and will be very helpful to the construction of stable treatment environments of medical workers by quickly establishing the medical accident compensation projects as such.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.28 no.6
• /
• pp.256-268
• /
• 2016

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2015. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering were carried out in the areas of flow, heat and mass transfer, cooling and heating, and air-conditioning, the renewable energy system and the flow inside building rooms. Research issues dealing with air-conditioning machines and fire and exhausting smoke were reduced. CFD seems to be spreading to more research areas. (2) Research works on heat transfer area were carried out in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the economic analysis of GHG emission, micro channel heat exchanger, effect of rib angle on thermal performance, the airside performance of fin-and-tube heat exchangers, theoretical analysis of a rotary heat exchanger, heat exchanger in a cryogenic environment, the performance of a cross-flow-type, indirect evaporative cooler made of paper/plastic film. In the area of pool boiling and condensing, the bubble jet loop heat pipe was studied. In the area of industrial heat exchangers, researches were performed on fin-tube heat exchanger, KSTAR PFC and vacuum vessel at baking phase, the performance of small-sized dehumidification rotor, design of gas-injection port of an asymmetric scroll compressor, effect of slot discharge-angle change on exhaust efficiency of range hood system with air curtain. (3) In the field of refrigeration, various studies were carried in the categories of refrigeration cycle, alternative refrigeration/energy system, system control. In the refrigeration cycle category, a cold-climate heat pump system, $CO_2$ cascade systems, ejector cycles and a PCM-based continuous heating system were investigated. In the alternative refrigeration/energy system category, a polymer adsorption heat pump, an alcohol absorption heat pump and a desiccant-based hybrid refrigeration system were investigated. In the system control category, turbo-refrigerator capacity controls and an absorption chiller fault diagnostics were investigated. (4) In building mechanical system research fields, eighteen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the user and location awareness technology applied dimming lighting control system, the lighting performance evaluation for light-shelves, the improvement evaluation of air quality through analysis of ventilation efficiency and the evaluation of airtightness of sliding and LS window systems. The subjects of building energy were worked on the energy saving estimation of existing buildings, the developing model to predict heating energy usage in domestic city area and the performance evaluation of cooling applied with economizer control. The studies were also performed related to the experimental measurement of weight variation and thermal conductivity in polyurethane foam, the development of flame spread prevention system for sandwich panels, the utilization of heat from waste-incineration facility in large-scale horticultural facilities.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.1
• /
• pp.208-227
• /
• 2013

Twenty-seven bronze bowls excavated from the Goryo burial complex at Deobu-gol were examined for their microstructure and chemical composition to characterize the bronze technology practiced by commoners at the time. Results showed that the objects examined can be classified into four groups: 1) objects forged out of Cu-near 22%Sn alloys and then quenched; 2) objects cast from Cu-below 10% Sn alloys containing lead; 3) objects cast from Cu-10%~20% Sn alloys containing lead and then quenched; 4) objects forged out of Cu-10~20% Sn alloys containing lead and then quenched. This study revealed that the fabrication technique as determined by alloy compositions plays an important role in bronze technology. The use of lead was clearly associated with the selection of quenching temperatures, the character of inclusions and the color characteristics of bronze surfaces. It was found that the objects containing lead were quenched at temperatures of $520^{\circ}{\sim}586^{\circ}C$ while those without lead were quenched at the range of $586^{\circ}{\sim}799^{\circ}C$. The presence of selenium in impurity inclusions was detected only in alloys containing lead, suggesting that the raw materials, Cu and Sn, used in making the lead-free alloys for the first group were carefully selected from those smelted using ores without lead contamination. Furthermore, the addition of lead was found to have significant effects on the color characteristics of the surface of bronze alloys when they are subjected to corrosion during interment. In leaded alloys, corrosion turns the surface light green or dark green while in unleaded alloys, corrosion turns the surface dark brown or black. It was found that in fabrication, the wall thickness of the bronze bowls varies depending on the application of quenching; most of the quenched objects have walls 1mm thick or below while those without quenching have walls 1mm thick or above. Fabrication techniques in bronze making usually reflect social environments of a community. It is likely that in the late Goryo period, experiencing lack of skilled bronze workers, the increased demand for bronze was met in two ways; by the use of chief lead instead of expensive tin and by the use of casting suitable for mass production. The above results show that the Goryo bronze workers tried to overcome such a resource-limited environment through technological innovations as apparent in the use of varying fabrication techniques for different alloys. Recently, numerous bronze objects are excavated and available for investigation. This study shows that with the use of proper analytical techniques they can serve as a valuable source of information required for the characterization of the associated technology as well as the social environment leading to the establishment of such technology.

• Journal of Apiculture
• /
• v.32 no.3
• /
• pp.139-146
• /
• 2017

Floral scent emitted from many plants is the critical factors for pollinator attraction and defense for adaptation in environments. The fragrance components of flowers are different in composition by geographical origins, climate factors and the development stages of flowers. In the present study, we investigated the volatile-floral compounds in flowers of Robinia pseudoacacia L. and defined the chemical contribution for flowering periods. The volatile compounds analysis was performed by gas chromatography with mass selective detector after solid phase microextraction (SPME). We reported different compositional features of fragrance compounds according to flowering periods. The abundant compounds identified in stage 1 were ${\alpha}$-pinene (66.80%) and ${\beta}$-pinene (26.53%). Those of the stage 2 were (Z)-${\beta}$-ocimene (37.57%), ${\alpha}$-pinene (15.16%), benzaldehyde (16.63%), linalool (12.13%). The volatiles of stage 3 comprised an abundance of (Z)-${\beta}$-ocimene (64.94%), ${\alpha}$-pinene (9.84%), linalool (8.92%), benzaldehyde (1.71%). Leaf volatiles were distinct from those in the reproductive plant parts by their high relative amount of (E)-${\beta}$-ocimene (23.50%) and (Z)-3-Hexenyl acetate (27.87%). Differences in flower scents of the different stages and leaves are discussed in light of biochemical constraints on volatile chemical synthesis and of the role of flower scent in evolutionary ecology of R. pseudoacacia.

• Korean Journal of Breeding Science
• /
• v.51 no.4
• /
• pp.475-481
• /
• 2019

The soybean cultivar 'Neulchan' was developed for production of soy-paste and tofu. SS91501-9-1-1 and SS96205 (F₂) were crossed in 1998, and F₃ to F₇ were selected by the pedigree method. A preliminary yield trial (PYT) and an advanced yield trial (AYT) were conducted from 2006 to 2008, and a regional yield trial (RYT) in nine regions was conducted from 2009 to 2011. In the RYT, 'Neulchan' was stable in variable environments and generated high yield. 'Neulchan' was determinate with white flower, light brown pod color, yellow spherical seed, and yellow hilum. Its flowering date and maturity date were Jul. 30 and Oct. 9, respectively. The plant height was shorter than that of 'Daewonkong' (a standard cultivar). 'Neulchan' had the same node number (14), higher first-pod height (12 cm), and lighter seed weight (21.7 g/100-seed weight) than those of 'Daewonkong' (14, 11, and 24.2 g/100-seed weight, respectively). 'Neulchan' had high resistance to bacterial pustule, and its resistance to soybean mosaic virus was similar to that of 'Daewonkong'. The yield and color of 'Neulchan' tofu were similar to those of 'Daewonkong' tofu, but the hardness was lower than that of 'Daewonkong' tofu. The soybean malt scent, fermented soybean yield, and γ-polyglutamic acid (γ-PGA) of 'Neulchan' were 3, 215%, and 24.6 mg/g, respectively. Its yield in adaptable regions was 307 kg/10a, higher than that of 'Daewonkong'. 'Neulchan' was expected to be cultivated and used widely for soy-paste and tofu production. (Registration No. 4904).

• The Korean Journal of Archival Studies
• /
• no.26
• /
• pp.103-149
• /
• 2010

Documentation strategy has been experimented in various subject areas and local regions since late 1980's when it was proposed as archival appraisal and selection methods by archival communities in the United States. Though it was criticized to be too ideal, it needs to shed new light on the potentialities of the strategy for documenting local regions in digital environment. The purpose of this study is to analyse the implementation issues of documentation strategy and to suggest the directions for documenting local regions of Korea through the application of the strategy. The documentation strategy which was developed more than twenty years ago in mostly western countries gives us some implications for documenting local regions even in current digital environments. They are as follows; Firstly, documentation strategy can enhance the value of archivists as well as archives in local regions because archivist should be active shaper of history rather than passive receiver of archives according to the strategy. It can also be a solution for overcoming poor conditions of local archives management in Korea. Secondly, the strategy can encourage cooperation between collecting institutions including museums, libraries, archives, cultural centers, history institutions, etc. in each local region. In the networked environment the cooperation can be achieved more effectively than in traditional environment where the heavy workload of cooperative institutions is needed. Thirdly, the strategy can facilitate solidarity of various groups in local region. According to the analysis of the strategy projects, it is essential to collect their knowledge, passion, and enthusiasm of related groups to effectively implement the strategy. It can also provide a methodology for minor groups of society to document their memories. This study suggests the directions of documenting local regions in consideration of current archival infrastructure of Korean as follows; Firstly, very selective and intensive documentation should be pursued rather than comprehensive one for documenting local regions. Though it is a very political problem to decide what subject has priority for documentation, interests of local community members as well as professional groups should be considered in the decision-making process seriously. Secondly, it is effective to plan integrated representation of local history in the distributed custody of local archives. It would be desirable to implement archival gateway for integrated search and representation of local archives regardless of the location of archives. Thirdly, it is necessary to try digital documentation using Web 2.0 technologies. Documentation strategy as the methodology of selecting and acquiring archives can not avoid subjectivity and prejudices of appraiser completely. To mitigate the problems, open documentation system should be prepared for reflecting different interests of different groups. Fourth, it is desirable to apply a conspectus model used in cooperative collection management of libraries to document local regions digitally. Conspectus can show existing documentation strength and future documentation intensity for each participating institution. Using this, documentation level of each subject area can be set up cooperatively and effectively in the local regions.