• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1253-1257
• /
• 2004

We have developed new rear LCD Projection TV engine with 3 projection lens. It has high brightness and contrast ratio, however poor cooling conditions. If optical components close to light source, optical components are damaged on high temperature, especially the blue among RGB colors is weakest by heat In this study, a new enhanced cooling method of LCD projection TV with 3 lens is shown: the best suited design of duct and relations between LCD panel and polarizer lifetime with changed area of duct.

• Journal of Korean Society for Atmospheric Environment
• /
• v.26 no.5
• /
• pp.469-474
• /
• 2010

Gasoline engines have proven their utility in light, medium and heavy duty vehicles. Concern about long term availability of petroleum and the environment norms by the increased vehicular emission have mandated the search for safe fuel. CNG is an environmentally clean alternative to the existing spark ignition engines with the advantages of minimum change. A higher octane number and a higher self ignition temperature make it an attractive gaseous fuel. The thermal efficiency is better than gasoline for the same engine. The reduced carbon mono oxide, carbon di-oxide, hydrocarbon emissions is a favorable outcome along with a slight increase in $NO_x$ emission when compared with gasoline fuel to a dual fuel mode in the existing spark ignition engines. The result from the experiment shows that CNG could be a potential substitute fuel that maintains performance and emissions characteristics in gasoline engines.

• Journal of the korean Society of Automotive Engineers
• /
• v.11 no.6
• /
• pp.80-88
• /
• 1989

본 연구에서는 양산중인 배기량 2.4Liter, 간접분사방식의 소형 디젤엔진에서 연소방식을 직접 분사방식으로 연소계를 재설계하여, 간접분사방식과 직접분사방식에 따른 엔진성능상의 차이점을 비교 평가하고, 아울러 직접분사방식에서 연소실 형상과 연소 관련 주요 인자들의 변경시 엔 진성은에 미치는 영향에 대해 고찰하였다. 직접분사방식 엔진은 간접분사방식 엔진에 대해 동 일출력, 동일 Smoke 수준인 경우 10-15%의 연료소비 저감의 효과가 있고, 이에 따라 연소관련 부품의 열부하면에서도 유리하였으나, 소음 및 NOx 배출은 증가하는 것으로 나타났다. 직접분사 연소방식에서는 Deep Bowl 연소실 형태의 Cylindrical Type 과 Re-entrant Type 에서 연비와 Smoke 등을 고려한 최적 분사시기가 Re-entrant Type 에서 4.deg. CA정도 늦었으며, 각기 최적 분사시기에서 스옴, NOx를 비교한 결과 Re-entrant Type이 더 우수하였다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.5
• /
• pp.30-37
• /
• 2001

Most gasoline engines employ a port injection system to achieve the better fuel-air mixing. A part of injected fuels adheres to the wall or intake valve and forms a film of liquid fuel. The other is secondarily atomized by the spray-wall interaction. A better understanding of this interaction will help in designing injection systems and controlling the strategies to improve engine performance and exhaust emissions. In the present research, the spray-wall interaction was investigated by a laser sheet visualization method. The shape of sprays was pictured at various impinging velocities and angles. The fuel dispersion was estimated by fluorescence light, and the atomization was evaluated by the enlarged images of droplets. The experimental results were compared with model predictions which are based on OPT method. The model has been modified to have the better agreement with the experimental result, and was implemented in the KIVA-II code.

• Journal of the korean Society of Automotive Engineers
• /
• v.14 no.3
• /
• pp.57-70
• /
• 1992

As automobile industry develope, design techniques to satisfy light weight and high efficiency in automobile parts is demanded. In this study modal analysis is performed using transfer matrix method to identify dynamic characteristics of exhaust system. It is estimated the theoretical transfer function by Pestel-Leckey method and the mode shapes in 3-D graphic. the validity of developed program is verified by comparing with the experimental results of exhaust system. Estimated modal parameters(natural frequency, vibrational mode, transfer function) are in accord with the experimental results. From the developed program, we can predict a location of the hanger which is determined by the lowest RMS value point, when displacement is given as an input at the engine side. We can find that attachment of spring modelled hanger at the hanger location bring vibration level down.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.5
• /
• pp.86-96
• /
• 2007

A direct-injection stratified-charge(DISC) engine has been considered as a promising alternative in spite of high unburned hydrocarbon emission levels during light load operation. In this paper investigation is made to characterize formation and combustion processes of stratified mixture charge in a simple constant volume combustion chamber. Both experimental and numerical analyses are performed for fluid and combustion characteristics with 3 different induction types for rich, homogeneous and lean mixture conditions. The commercial code FIRE is applied to the turbulent combustion process in terms of measured and calculated pressure traces and calculated distributions of mean temperature, OH radical and reaction rate. It turns out that the highest combustion rate occurs for the rich state condition at the spark ignition location due to existence of stoichiometric mixture and timing.

• Journal of the korean Society of Automotive Engineers
• /
• v.5 no.2
• /
• pp.15-20
• /
• 1983

The nature and the sources of sound in cars is discussed in the light of many previous works, and the importance of the system resonances inside cars is suggested. An investigation of a 'boom' problem in a small size passenger car is described. It was established that the 'boom' frequencies coincided with engine firing frequency and also with several system resonances. To find out main transmission path of the noise to the car interior, various possible sources were eliminated from the investigation by means of simple modification to the vehicle. Data on the structural modes of the body, and the acoustic modes of the passenger compartment at various forcing cases were obtained to provide better understanding of the problem. It was found that the acoustic resonance responsible for the boom was controlled largely the bending motion of the floor. To investigate the effect of the structural modification to the acoustic response, center floor of the car was reinforced. a great reduction of the noise inside the car especially at the offending speed range, was achieved by this modification.

• Journal of information and communication convergence engineering
• /
• v.1 no.4
• /
• pp.169-173
• /
• 2003

The performance of modern mainframe computers keeps increasing due to the advances in the semiconductor technology. However, the quest for the faster computer has never been satisfied. To overcome the discrepancy in the supply and demand, we studied a high performance computer architecture utilizing a three-dimensional Holographic Data Storage Systems (HDSS) as a secondary storage system. The HDSS can achieve a high storage density by utilizing the third dimension. Furthermore, the HDSS can exploit the parallelism by processing the two-dimensional data in a single step. To compare the performance of the HDSS with the conventional hard disk based storage system, we modeled the HDSS using the DiskSim simulation engine and performed the simulation study. Results showed that the HDSS can improve the access time by 1.7 times.

• 한국전산유체공학회:학술대회논문집
• /
• 2010.05a
• /
• pp.1-1
• /
• 2010

With the power of supercomputers increasing exponentially, there is an insatiable need for more advanced multi-disciplinary aerospace CFD simulations. A particular current interest is the 3D viscous turbulent simulation of the highly nonlinear aspects of aero-icing. The applications of CFD in that field are literally light-years behind aerodynamics, with a significant number of users still mired in correlations, or 2D, inviscid, incompressible, and, yes, Panel Methods simulations! Thus, the disparity of tools between aerodynamics and icing departments within an organization leads to a disconnect that makes ice protection a downstream isolated process that is not an integral part of the aerodynamic behavior of an aerospace system (aircraft, rotorcraft, jet engine, UAV, etc.). While 3D RANS has been recently introduced, it is still considered computationally too demanding for industry when wide parametric studies for certification are required. In addition, not unlike the situation in aerodynamics say 20 years ago, naysayers are at every corner claiming that CFD is not reliable and is of limited use.

• Proceedings of the KSME Conference
• /
• 2000.11b
• /
• pp.353-358
• /
• 2000

To achieve the requirement for high fuel economy and low emissions, the research for GDI engines is recently very brisk in the whole world. This study was performed to measure distribution of average particle size in non-evaporating spray. The 2-D fluorescence/scattering images of fuel spray were captured simultaneously by visualization system composed of a laser sheet, a doubling prism, optical filters, and an ICCD camera. Using the ratio of the two light intensities, particle size distribution was obtained. The SMD measured by fluorescence/scattering technique was compared with it obtained by PDA. The experimental results show that the spray structure of GDI injector and temporal SMD distribution.