• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.05a
• /
• pp.27-31
• /
• 2001

We fabricated organic electroluminescent(EL) devices with mixed emitting layer of poly(N-vinylcarbazole)(PVK), 2,5-bis(5'-tert-butyl-2-benzoxazoly)thiophene(BBOT), N,N'-diphenyl-N,N'-(3-methyphenyl)-1,1'-biphenyl-4, 4'-diarnine(TPD) and poly(3-hexylthiophene)(P3HT). To improve the external quantum efficiency of EL devices, we added the functional layer to the devices such as LiF insulating layer, carrier confinement layer(BBOT) and hole injection layer(CuPc). In the ITO/emitting layer/Al device, the maximum quantum efficiency at 15V was $1.88{\times}10^{-5}%$. And then, it is increased by a factor of 27 to $5.2{\times}10^{-3}%$ in ITO/CuPc/emitting layer/BBOT/LiF/Al device at 15V.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.48 no.3
• /
• pp.245-254
• /
• 2022

In this study, we tried to investigate the efficacy of combined light therapy using low-power lasers at 655 nm and LEDs emitting wavelengths at 625 ± 5 nm and 850 ± 10 nm in hair loss and scalp. A total of 33 subjects were enrolled in this clinical trial. Each subject used the LLLT and LED device on the scalp for 10 min on a daily basis for 12 weeks. After 12 weeks of LLLT and LED device use, there were significant improvements in redness, elasticity, and hydration of the scalp. Additionally, hair luster and tensile strength were improved. A remarkable decrease in total shed hairs was observed in all subjects at 4, 8, and 12 weeks without any serious adverse event. Combined light therapy using LLLT and LEDs proved to be an effective treatment for reducing hair loss and improving scalp condition.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.11
• /
• pp.1566-1570
• /
• 2013

In this paper, we analyzed the electric characteristics of the OLEDs device of which anode ITO has been treated with the oxygen plasma. We fabricated the basic three-layer structure (ITO / AF / $Alq_3$ / $Cs_2CO_3$ / Al) device, analyzed how the oxygen plasma treatments of the ITO surface affects to the electrical characteristics of OLEDs. We also produced a four-layer structure device (ITO / AF / TPD / $Alq_3$ / $Cs_2CO_3$ / Al) with the oxygen plasma treatment. From the comparative analysis to the devices, we confirmed following results. The three-layer structure OLEDs device with oxygen plasma treatment has better characteristics than the device without the treatments; maximum luminance, luminous efficiency, and external quantum efficiency are improved approximately 151 [%], 126 [%], and 175[%], respectively. Also, the electric characteristics of the four-layer structure device with oxygen plasma treatment are improved comparing to the characteristics of the three-layer structure device with oxygen plasma treatment; maximum luminance, luminous efficiency, and external quantum efficiency are improved approximately 144 [%], 115 [%], and 124[%], respectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.5
• /
• pp.344-349
• /
• 2015

A new information society of late has arrived by the rapid development of various information & communications technologies. Accordingly, mobile devices which are light and thin, easy and convenient to carry on the market. Also, the requirements for the larger television sets such as fast response speed, low-cost electric power, wider visual angle display are sufficiently satisfied. The currently most widely studied display material, the Organic Light-emitting Diodes(OLEDs) overwhelms the Liquid Crystal Display(LCD), the main occupier of the market. This new material features a response speed of more than a thousand times faster, no need of backlight, a low driving voltage, and no limit of view angle. And the OLEDs has high luminance efficiency and excellent durability and environment resistance, quite different from the inorganic LED light source. The OLEDs with simple device structure and easy produce can be manufactured in various shapes such as a point light source, a linear light source, a surface light source. This will surely dominate the market for the next generation lighting and display device. The new display utilizes not the glass substrate but the plastic one, resulting in the thin and flexible substrate that can be curved and flattened out as needed. In this paper, OLEDs device was produced by changing thickness of Teflon-AF of hole injection material layer. And as for the electrical properties, the four layer device of ITO/TPD/$Alq_3$/BCP/LiF/Al and the five layer device of ITO/Teflon AF/TPD/$Alq_3$/BCP/Lif/Al were studied experimentally.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.724-726
• /
• 2004

Highly efficient blue organic light-emitting devices (OLEDs) utilizing the idea of copper phthalocyanine (CuPc)/N,N'-bis-(1-naphthyl)-N,N'-diphenyl,1,1'-biphenyl- 4,4'-diamine (NPB) composite hole transport layer (CPHTL) have been fabricated. The effect of inserting CPHTL upon the performance of blue OLEDs with 2-methyl-9,10-di(2-naphthyl)anthracene (MADN) as the blue emitter has been investigated. Compared with the luminous efficiency of the standard blue device without CPHTL (1.33 cd/A), that of the device with 40:60 CuPc/NPB CPHTL has been increased by more than twice up to 2.96 cd/A with a Commission Internationale d'Eclairage (CIE) coordinates of(x = 0.15, y = 0.10) and a power efficiency of 1.46 lm/W (20 mA/$cm^2$) at 6.39 V. The increased device efficiency is attributed to an improved balance between hole and electron currents arriving at the recombination zone.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.1023-1026
• /
• 2007

Highly efficient inverted bottom emission organic light emitting device (IBOLED) with a structure of ITO/EIL/Alq3/NPB/WO3/Al was investigated. To enhance electron injection from ITO cathode to Alq3 EML layer, we introduced ultra thin Al layer and Liq layer between ITO and Alq3. The device characteristics showed tune on voltage of 4.5V, the maximum luminance of 21100 Cd/m2 and current efficiencies of 3.56 Cd/A.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.8
• /
• pp.678-681
• /
• 2011

We have investigated the effect of organic thin film on the driving voltage of OLED (organic light emitting diode) by inserting a 5 nm thick 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline (BCP) or triphenylphosphineoxide ($Ph_3PO$) between tris-(8-hydroxyquinoline)aluminum ($Alq_3$) electron transport layer and 4,4'-bis(2,2'-diphyenylvinyl)-1,1'-biphenyl (DPVBi) emission layer. The device with 5 nm thick $Ph_3PO$ layer exhibited higher maximum current efficiency and lower driving voltage than the device with BCP layer, resulting from better electron injection from $Alq_3$ to DPVBi in the device with $Ph_3PO$ layer.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.4
• /
• pp.397-402
• /
• 2023

We have developed inverted green phosphorescent organic light emitting diodes (OLEDs) using 1,1-bis[(di-4-tolylamino)phenyl]cyclohexane (TAPC) and bis(carbazole-9-yl)biphenyl (CBP) hole transport layers. The driving voltage, current efficiency, power efficiency, and emission characteristics of devices were investigated. While the driving voltage for the same current density was about 1~2 V lower in the devices with the TAPC layer, the maximum luminance was higher in the device with the CBP layer. The maximum current efficiency and power efficiency were 3.2 and 2.7 times higher in the device with the CBP layer, respectively. The higher efficiency in the CBP device resulted from the enhanced hole-electron balance although weak parasitic recombination takes place in the CBP hole transport layer.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.582-584
• /
• 2004

The light-emitting properties of poly(2-triethylgermyl-1,4-phenylenevinylene) (TEG-PPV) are compared with those of the silyl-substituted PPV homologue, poly(2-trimethylsilyl-1,4phenylenevinylene) (TMS-PPV). The precursor polymer is solution-processable. After carrying out thermal elimination on the precursor polymer film, the resulting fully conjugated polymer film was found to exhibit high thermal stability in air, and absorption that is shifted to the longer wavelength region owing to the extension of the n-conjugated system. TEG-PPV exhibits efficient green light emission; the maximum PL emission of a TEG-PPV thin film was found to be at 515 nm. The HOMO and LUMO energy levels were also determined using photo-emission spectroscopy. The performance of the TEG-PPV EL device was found to be comparable to that of the TMS-PPV device.

• Macromolecular Research
• /
• v.14 no.1
• /
• pp.81-86
• /
• 2006

Poly(fluorenylenevinylene-terphenylenevinylene) containing phenyl pendant group was synthesized by Suzuki coupling reaction and characterized by ${1}^H$-NMR, ${13}^C$-NMR, and IR-spectrum. The weight average molecular weight ($M_{w}$) of the obtained polymer was 31,000 with a polydispersity index of 1.9. The polymer showed good solubility in common organic solvents, and the solution and film emitted blue emission ($\lambda_{max}$=460 nm) on irradiation with UV light. The ITO/PEDOT/polymer/Al device fabricated using the polymer as an emitting layer emitted blue light with a maximum peak around 460 nm. The maximum efficiency of the device was 0.011$\%$.