• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.04a
• /
• pp.83-84
• /
• 2006

ITO/4, 4', 4"-tris (N -3 - methylphenyl - N - phenyl - amino) - triphenylamine, [m-MTDATA] / Terbium Iris - (1 - phenyl - 3 - methyl - 4 - (tertiarybutyryl) - pyrazol - 5 - one) triphenylphosphine oxide [$(tb-PMP)_3Tb-(Ph_3PO)$] / Mg:Ag devices were made to investigate its electrical and light emission properties. The thickness of m-MTOATA layer was varied from 0 to 80 nm. There was a threshold thickness for the sufficient hole injection. The insertion of 20 nm thick m-MTDATA layer between ITO and Tb-complex resulted in the right shift of current-voltage curve because of the insufficient hole injection. The low operating voltage can be obtained above the 40 nm of m-MTDATA layer. The insertion of m-MTDATA induced the increase of the background in the electroluminescence spectrum which was dependent on the current density of the devices.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.457-458
• /
• 2007

We investigated a resistor network model for the horizontal AlInGaN LED. Adding the proposed current density dependent relative quantum efficiency, the power simulation can be also obtained. Comparing the simulation and the measurement results for the LED with the size of $350{\mu}m$, the model is reasonable to simulate the forward voltage and the light output power. Using this model we investigated the optimization of the position and the number of the finger electrodes in a given chip area. It shows that the center disposition of the p-finger electrode in p-area is optimal for the voltage and best for the power. And the minimum number of the n-finger electrodes is best for the power.

• 한국가시화정보학회:학술대회논문집
• /
• 2002.11a
• /
• pp.101-104
• /
• 2002

Simultaneous measurement of turbulent velocity and concentration field in a stirred mixer tank is carried out by using PIV/LIF technique. Instantaneous velocity fields are measured by a $1K\times1K$ CCD camera adopting the frame straddle method while the concentration fields are obtained by measuring the fluorescence intensity of Rhodamine B tracer excited by the second pulse of Nd:Yag laser light. Image distortion due to the camera view-angle is compensated by a mapping function. It is found that the general features of the mixing pattern are quite dependent on the local flow characteristics during the rapid decay of mean concentration. However, the small scale mixing seems to be independent on the local turbulent velocity fluctuation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.278-278
• /
• 2010

Electrically tunable photonic band gap (PBG) materials based on crystalline structures have been developed for active components of display. Despite considerable advances, the intrinsic drawbacks of the crystalline PBG materials such as the strong angle dependent hue and difficulty of fabricating defect-free structures in large area have yet to be addressed for their practical applications. Here we report quasi-amorphous colloidal structures exhibiting angle-independent photonic colors in response to the electric stimuli. Moderately polydisperse colloidal Fe3O4@SiO2 nanoparticles dispersed in organic solvents exclusively form quasi-amorphous photonic materials at sufficiently high concentrations (> 30 wt%), and which reversibly reflect incident light in visible region ($\lambda$ peak = 490~655 nm) in response to the relatively low bias voltage (0~4 V). We show the angle-independent tunable photonic colors with the fast response time (50~170 ms) due to the isotropic nature of quasi-amorphous structures. Conventional vacuum injection technique is applicable for fabricating flexible full color photonic display pixels with various pre-defined shapes.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.12
• /
• pp.2361-2365
• /
• 2007

Temperature-dependent current-voltage characteristics of Organic Light-Emitting Diodes(OLEDs) were studied. The OLEDs were based on the molecular compounds, N,N'-diphenyl-N,N'-bis(3- methylrhenyi)-1,1'-diphenyl-4,4'-diamine (TPD) as a hole transport and tris(8-hydroxyquinoline) aluminum(Alq3) as an electron transport and emissive material. The current-voltage characteristics were measured in the temperature range of 10[K] and 300[K]. A conduction mechanism in OLEDs was interpreted in terms of tunneling and trap-filled limited current.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.1
• /
• pp.42-47
• /
• 1995

Interpolymer complex formation between basic polypeptide poly(L-proline) Form Ⅱ (PLP(Ⅱ)) and acidic polypeptides poly(L-glutamic acid) (PLGA) and poly(L-aspartic acid)(PLAA) has been studied in water-methanol (1:2 v/v) mixed-solvent by viscometry, potentiometry, light scattering and circular dichroism (CD) measurements. It has been found that polymer complexes between PLP(Ⅱ) and PLGA (or PLAA) are formed via hydrogen bonding with a stoichiometric ratio of PLP(Ⅱ)/PLGA (or PLAA)=1:2 (in unit mole ratio) and that PLP(Ⅱ) forms polymer complex more favorably with PLGA than with PLAA. In addition, the minimum (for pH 5.0) and the maximum (for pH 3.2) in reduced viscosity of dilute PLP(Ⅱ)-PLGA mixed solutions are observed at 0.67 unit mole fraction of PLGA (i.e., [PLP(Ⅱ)]/[PLGA]=1/2). These findings could be explained in terms of molecular structure (or conformation) of the complementary polymers associated with the complex formation.

• Journal of the Korean Society for Railway
• /
• v.7 no.1
• /
• pp.55-59
• /
• 2004

Composite materials were used widely due to merit of light weight, low maintenance cost and easy installation. But it is the cause of enormous casualties to men and properties because of weak about the fire. Particularly, it is more serious in case of subway train installed composite materials. For this reason, experimental comparison has been done fur measuring heat release rate(H.R.R) and smoke production rate(S.P.R) of interior panels of electric motor car using cone calorimeter. A high radiative heat flux of 50kW/㎡ was used to bum out all materials and to simulate the condition of fully developed fire case in the tests. It was observed that Heat Release Rate and Smoke Production Rate curves were dependent on the kinds of the interior materials. From the heat release rate curves, the sustained ignition time, peak heat release rate and total heat release rate were deduced, These data are useful in classifying the materials by calculating two parameters describing the possibility to flashover.

• Current Optics and Photonics
• /
• v.3 no.4
• /
• pp.275-284
• /
• 2019

Chirality is ubiquitous in physics and biology from microscopic to macroscopic phenomena, such as fermionic interactions and DNA duplication. In photonics, chirality has traditionally represented differentiated optical responses for right and left circular polarizations. This definition of optical chirality in the polarization domain includes handedness-dependent phase velocities or optical absorption inside chiral media, which enable polarimetry for measuring the material concentration and circular dichroism spectroscopy for sensing biological or chemical enantiomers. Recently, the emerging field of non-Hermitian photonics, which explores exotic phenomena in gain or loss media, has provided a new viewpoint on chirality in photonics that is not restricted to the traditional polarization domain but is extended to other physical quantities such as the orbital angular momentum, propagation direction, and system parameter space. Here, we introduce recent milestones in chiral light-matter interactions in non-Hermitian photonics and show an enhanced degree of design freedom in photonic devices for spin and orbital angular momenta, directionality, and asymmetric modal conversion.

• International Journal of Computer Science & Network Security
• /
• v.22 no.3
• /
• pp.89-94
• /
• 2022

The Saudi Vision 2030 defined the directions of the national economy and market towards diversifying sources of income, and developing energy to become less dependent on oil. The study sought through a theoretical review to identify the reality of the energy sector and the areas of investment available in the field of renewable energy. Findings showed that investment in the renewable energy sector is a promising source according to solar, wind, hydrogen, geothermal energy and burning waste than landfill to extract biogas for less emission. The renewable energy sector faces challenges related to technology, production cost, price, quantity of production and consumption, and markets. The study revealed some recommendations providing and suggested electronic marketing system to provide investors and consumers with energy available from renewable sources.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.4
• /
• pp.141-145
• /
• 2021

The brightness of the Organic Light Emitting Diode (OLED) display is controlled by thin-film transistors (TFTs). Regardless of the materials and the structures of TFTs, an OLED suffers from the instable threshold voltage (V_th) of a TFT during operation. When designing an OLED pixel with circuit simulation tool such as SPICE, a designer needs to take V_th shift into account to improve the reliability of the circuit and various compensation methods have been proposed. In this paper, the effect of the compensation circuits from two typical OLED pixel circuits proposed in the literature are studied by the transient simulation with a SPICE tool in which the stretched-exponential time dependent V_th shift function is implemented. The simulation results show that the compensation circuits improve the reliability at the beginning of each frame, but V_th shifts from all TFTs in a pixel need to be considered to improve long-time reliability.