• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.9
• /
• pp.708-713
• /
• 2010

In this research a ring light was developed so that a partial shadowless shooting for the patient's affected area at the medical treatment room and surgical operation room using high luminance light emitting diode (LED) for which attention is being paid as new lighting parts for medical purpose. LED which was applied to the development used high luminance three color LED for full color for which various color materialization and the adjustment of radiation intensity are possible and we can get white light in order to emphasize the delicate expression for generic tone of shooting object, strong highlight, simple shadow and three dimensional effect at the time of close-up shadowless shooting of the affected area. And at the time of design of ring light, the characteristics of LED and the loss of light at the time of penetrating light diffusion PC were considered so that intensity of illumination for over 150 lx can be obtained. The result of measurement of the intensity of illumination of the ring light that was developed revealed that maximum intensity of illumination of 225.7 lx was obtained, while smoke index was measured to be maximum 78 Ra in the case of Red(50%) Green(100%) and Blue LED(60%). We could confirm that response speed was also very fast as 1.72 ms.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.30 no.2
• /
• pp.78-85
• /
• 1994

The author carried out an experiment to find out the response of Striped puffer. Fugu xanthoperus (Temminck et Schlegel) to the color lights. The experimental tank (300L$\times$50W$\times$50Hcm) was set up in a dark room. Six longitudinal sections with 60cm intervals are marked in the tank to observe the location of the fish. Water depth in the tank was kept 50cm level. Light bulbs of 20W at the both ends of the tank projected the light horizontally into the tank. Two different colored filters were selected from four colors of red, blue, yellow, and white, and the were placed in front of the light bulbs to make different colors of light. Light intensity was controlled by use of auxiliary filiters intercepted between the bulb and the filter. The fishes were acclimatized in the dark for 60 minutes before they were employed in the experiment. Upon turning on the light, the number of fish in each section was counted 40 times in 30 second intervals, and the mean of the number of fish in each section was counted 40 times in 30 second intervals, and the mean of the number of fish in each section was given as the gathering rate of the fish. The colors favourited by the fish was found in order of blue, yellow, white and red in the daytime, and blue, white, yellow and red at night. The difference of the average distribution on two different colors of light was 13.12%(4.10-26.55%), and the difference in the daytime(14.79%) was larger than at night (11.45%). Constantly the gathering rate of fish on illumination period was fluctuated with instability. As the gathering rate of fish on illumination period was fluctuated with instability. As the gathering rate on one color of light increased, the gathering rate on the other color of light decreased. The difference of the gathering rate on two different colors of light was comparatively distinct and the difference in the daytime was larger than at night.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.7
• /
• pp.767-777
• /
• 2012

This study analyzed the system and arguments on the light-pink official uniforms and investigated the backgrounds and principles on the changes of the Sibok system. A study on light-pink danryeong in the latter part of the Joseon Dynasty is a de facto study on Sibok since the name of the light-pink official uniforms (implemented at the time of King Seonjo) changed from Sangbok to Sibok. Sangbok is discussed to explain the name change from Sangbok to Sibok and distinguish their usages; in addition, Gongbok is examined to understand the characteristics of the Sibok system. The Annals of the Joseon Dynasty (books written by scholars) and related laws are used as research materials. The research results are as follows. The name of the light-pink uniforms (a custom before the Japanese invasion in 1592) changed from Sangbok to Sibok at the time of King Gwanghaegun and the light-pink uniform was used as a relatively light formal uniform compared to Sangbok. Sibok was added to the law Sok-dae-jeon at the time of King Yeongjo (because the king respected the custom) and its color rank system was denoted from light-pink and red. Sibok was revised to light-pink, blue, and green under the law Dae-jeon-tong-pyeon that was promulgated at time of King Jeongjo. In the development of the Sibok system in the latter part of the Joseon Dynasty, the color rank system of Gongbok was reflected. The sovereign ideas in the official uniforms in the latter part of the Joseon Dynasty (revealed in the study of the system and arguments on the light-pink official uniforms) were the thoughts that respected the custom and the principles that distinguish ranks to establish a Confucian based hierarchy.

• Journal of Korean society of Dental Hygiene
• /
• v.14 no.4
• /
• pp.585-591
• /
• 2014

Objectives : The purpose of this study was to investigate of the color change, tooth surface and intra-pulpal temperature of tooth bleaching by light activation Methods : Forty-eight extracted bovine teeth were immersed into a tea solution for 24 hours. The specimens were randomly divided into four groups(n=15):(G1) 15% HP + without light activation, (G2) 15% HP + light activation, (G3) 25% HP + without light activation, (G4) 25% HP + light activation. All specimens were bleached for 15 minutes three times. The spectrophotometer (CM-2600d, Konica Minolta, Osaka, Japan) was used including before bleaching, immediately after bleaching, 1 week, 1 and 3 months after the end of bleaching. The temperature rise were measured in the pulpal chamber and tooth surface with a digital thermocouple thermometer(Termopar Digital Multimeter, Tektronix DMM916, USA). Between the tested time points, the specimens were stored in distilled water. The data were analyzed by ANOVA, t-test and Tukey's post hoc test set at 0.05. Results : There was no significant color change by the use of light after the bleaching treatment(p>0.05). The dental bleaching treatments of teeth with 15% HP and 25% HP did not seem to be more effective when light source was used. There was no difference in color stability between groups within three month(p>0.05). There was an increase in tooth surface and pulp temperature, but it was not sufficient to cause damage to the pulp. Conclusions :The use of light activation has no obvious effective impact on the tooth bleaching effect.

• Journal of Advanced Navigation Technology
• /
• v.13 no.5
• /
• pp.773-780
• /
• 2009

This study proposed a face region detection algorithm using fuzzy inference of pixel hue and intensity. The proposed algorithm is composed of light compensate and face detection. The light compensation process performs calibration for the change of light. The face detection process evaluates similarity by generating membership functions using as feature parameters hue and intensity calculated from 20 skin color models. From the extracted face region candidate, the eyes were detected with element C of color model CMY, and the mouth was detected with element Q of color model YIQ, the face region was detected based on the knowledge of an ordinary face. The result of experiment are conducted with frontal face color images of face as input images, the method detected the face region regardless of the position and size of face images.

• Korean Journal of Cognitive Science
• /
• v.13 no.3
• /
• pp.23-31
• /
• 2002

Previous studies on color sensibility employed mostly general emotional and/or sensational words, and could not have a focus on the matter of 'color'. This study tried to collect sensibility words of color widely, and select representative words in a systematic way, with a result of 90 sensibility word list. 25 participants were asked to indicate how they feel on each item of the list when each of 22 colored light was projected on the screen. Factor analysis of data extracted 5 sensibility factors, such as mildness, neatness, splendour, dynamic, and weightiness. They were thought to represent color sensibilities more specifically, while having some similarities to, than those factors proposed previously. Issues on interpretation of factors and application of this result were discussed.

• Fashion & Textile Research Journal
• /
• v.22 no.1
• /
• pp.55-65
• /
• 2020

Smart photonic clothing integrates light emitting technology inside and outside of the garment and integrates it as a fashion product. It expresses digital color that radiates light outside the body that expands the functionality of the clothing as well as makes new and various attempts visually. It is also is gradually expanding into a new area of fashion. LED, one of the digital color output devices, is a light emitting device that is suitable for presenting consumer customized designs in that the patterns and colors of clothes can be modified as desired by utilizing computer technology such as program coding. LED technology that can realize various digital colors is actively applied in various industrial design fields, but there are few previous studies on smart clothes using LED color in Korean fashion fields. Therefore, this study develops a prototype of a customized LED smart photonic garment that allows the user to directly participate in the color implementation of clothing and select a digital color suitable for the desired function. The LED module was designed to be detachable from clothing and made using a 256-pixel LED matrix. Various coding patterns of the LED were designed using the coding change of Arduino program.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.25 no.3
• /
• pp.9-15
• /
• 2002

Due to the inconsiderateness of human capability and inappropriate arrangement of display and control unit at the industrial site, the human error leads to a various accidents. This study was performed to investigate the visual range at the eye field and stationary field at the various angles with three different visual stimuli of alphabetic character, color slip and light-emitting diode. Three kinds of various alphabetic characters depending on length and breadth ratio (1:1, 3:5, 5:3) and three different colors (red, yellow, green) were used for the stimuli. Twenty-five subjects (11 males and 14 females) participated for this study. The results showed that female had wider visual range than male at the eye field, however no significant difference was found at the stationary field. The light-emitting diode had a widest visual range then color slip and characters are in order at the eye field and stationary field. For the character stimulus, the widest visual range was shown at length and breadth ratio of 1:1. The other ratios (3:5 and 5:3) showed no significant difference. The color of red had a widest visual range on the light-emitting diode, however, the color of yellow showed a widest visual range on the just color slip at the eye field. The result of this study would be valuable in applying to the design of visual display and the panel layout of control and displays in the industrial site.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.4
• /
• pp.364-375
• /
• 2012

This study investigates the effects of interior design elements on the satisfaction and preference for space. Field measurements and surveys were conducted in three coffeeshops where various interior design elements were applied. Results indicate that movable tables and chairs for two people were preferred in the space. They need to be placed flexibly according to the visitors' needs to improve satisfaction for convenience. To improve spatial satisfaction, the brightness of color applied to wall surfaces was recommended to be lower than that of color used for floor surfaces. The surfaces of space and interior design elements such as furniture also need to be kept clean. Lamps with lower color temperature were effective to enhance spatial satisfaction. Light sources should be shielded when a pendant lighting system with general diffuse type was used in space. Natural daylight through window was also required for better satisfaction level. Multiple linear regression implied that the cozy feeling by electric light, existence of daylight, flexible layouts for tables and chairs, color and quality of material for tables and floor were significant contributors to overall spatial satisfaction.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.4
• /
• pp.92-98
• /
• 2022

This paper proposes a new method of the traffic signal detection and the recognition in an HSI color model. The proposed method firstly converts a ROI image in the RGB model to in the HSI model to segment the color of a traffic signal. Secondly, the segmented colors are dilated by the morphological processing to connect the traffic signal light and the signal light case and finally, it extracts the traffic signal light and the case by the aspect ratio using the connected component analysis. The extracted components show the detection and the recognition of the traffic signal lights. The proposed method is implemented using C language in Raspberry Pi 4 system with a camera module for a real-time image processing. The system was fixedly installed in a moving vehicle, and it recorded a video like a vehicle black box. Each frame of the recorded video was extracted, and then the proposed method was tested. The results show that the proposed method is successful for the detection and the recognition of traffic signals.