• 자원리싸이클링
• /
• 제11권4호
• /
• pp.11-16
• /
• 2002

폐자동차 파쇄를 통한 주요구성물질의 분리 및 분석평가를 위한 현장실험을 수행하였다. 모재인 폐자동차 차피로는 국내 자동차 업체에서 제작한 Sonata II, Sephia 및 Prince의 3종을 선택하여 엔진부분과 타이어 및 문짝 등을 미리 제거하고 압축된 상태로 제공받았다. 현장설비의 주요 공정은 pre- 및 main-shredder, 분급기, 자선기, 와류선별기 및 수작업 분리로 구성되어 있었다. shredder 산물의 현장 분리실험결과 철 스크랩이 전체의 60.1%를 차지하여 가장 비중이 높았으며, 알루미늄, 구리 및 아연 등의 비철금속류는 약 2％ 정도인 것으로 나타났다. Light fluff는 fluff 전체 중량의 90% 정도를 차지하는 것으로 관찰되었으며, 5cm undersize 가 70.5%로써 대부분이었고 나머지는 플라스틱, 섬유 및 스폰지 등으로 구성되어 있었다 heavy fluff의 경우에는 고무와 플라스틱이 주구성물질인 것으로 나타났으며, 발열량의 경우 플라스틱이 10,000 cal/gr을 상회하여 가장 높았고 가죽과 고무류가 각각 10.3 및 2.55 wt％의 비교적 높은 CI함량을 보였다.

• 한국자동차공학회논문집
• /
• 제24권5호
• /
• pp.556-565
• /
• 2016

As a result of the enforced control of emission, many devices, including the diesel particulate filter, have been installed in diesel cars to reduce the emission of particulate matters. In this study, a car fire case has been investigated and analyzed. A car fire broke out after the vehicle traveled a distance of 1.4 km from a car service center. The car was provided with DPF cleaning when the DPF warning light came on. After being dismantled in the engine room, the car's engine and gearbox were investigated. The findings showed that the rear part of the DPF metal case was melted and punctured, while the honeycomb filter of the DPF was damaged. The car fire was caused by an overheated DPF associated with inaccurate maintenance practice. Therefore, the responsibility of the fire rested on the car service center that performed the DPF cleaning.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.923-924
• /
• 2010

• 자동차안전학회지
• /
• 제3권2호
• /
• pp.11-16
• /
• 2011

In recent years, rapid-increasing market share of compact cars and SUVs has brought for both consumer and automaker to pay more attention on crash compatibility between the compact passenger vehicles and the light trucks (i.e., Pickups and SUVs). Vehicle compatibility regarding both self and partner protection in frontal crash of different class vehicles is one of hot issues in vehicle safety. Furthermore, it is expected that the amendment of UNECE-Regulation 94 to implement compatibility issues in couple of coming years. In this study, conceptual design of compatibility compliant frontal vehicle structure which subjects to improve? the distribution of frontal crash loading and structural engagement between vehicles is introduced. The effects of proposed vehicle structure on both possible candidates (i.e. FWRB, FWDB and PDB) for a compatibility evaluation test procedure and car-to-car crash are also investigated.

• 오토저널
• /
• 제5권2호
• /
• pp.15-20
• /
• 1983

The nature and the sources of sound in cars is discussed in the light of many previous works, and the importance of the system resonances inside cars is suggested. An investigation of a 'boom' problem in a small size passenger car is described. It was established that the 'boom' frequencies coincided with engine firing frequency and also with several system resonances. To find out main transmission path of the noise to the car interior, various possible sources were eliminated from the investigation by means of simple modification to the vehicle. Data on the structural modes of the body, and the acoustic modes of the passenger compartment at various forcing cases were obtained to provide better understanding of the problem. It was found that the acoustic resonance responsible for the boom was controlled largely the bending motion of the floor. To investigate the effect of the structural modification to the acoustic response, center floor of the car was reinforced. a great reduction of the noise inside the car especially at the offending speed range, was achieved by this modification.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.548-553
• /
• 2008

Low Floor buses have no steps to get on or get off the main cabin to provide the old and the handicapped with easy access. The car body for the low floor bus was designed to consider Korean physical standard, passenger capacity (standee, seated, handicapped), arrangement of vehicle components, and bus law or regulations. It was designed as an one body, without any reinforcement armature, which has light-weight sandwich constructions with glass epoxy skins, aluminum honeycomb cores and inner-frames. In this paper, torsion rigidity of the designed car body was evaluated and compared with that of a car body with reinforcement armatures in the cabin. Finite element method verified that the designed car body without reinforcement armatures could satisfy requirements of torsion rigidity.

• 대한인간공학회지
• /
• 제29권6호
• /
• pp.959-964
• /
• 2010

Seat belt is an important means to protect drivers and passengers from the damages by car accidents. Many ways to increase the seat belt wearing rate have been proposed through human factors researches. The primary ways to increase seat belt use rate have emphasized the intention-behavior cycle. This study focused on the gap between intention and behavior. The gap may be bridged by the habit for seat belt use behavior. Divers following a desirable car starting sequence, from sitting on the chair, fastening seat belt, starting engine to moving a car, reported that higher belt wearing rate and unconscious behavior (automated response). That is, the habitualized procedure knowledge prevented drivers from forgetting to fasten their seat belt. The reminder systems such as warning light and warning sound could not significantly give an influence in remembering to fasten seat belt. In order to increase the seat belt use rate, the desirable car starting procedure should be included in the driving education program.

• International Journal of Computer Science & Network Security
• /
• 제24권3호
• /
• pp.142-150
• /
• 2024

A conceptual model represents an understanding of a system that is going to be developed, which in this research, a driving simulation software to study driver behavior at signalised intersections. Therefore, video observation was conducted to study driver compliance behaviour within the dilemma zone at signalised intersection, with regards to driver's distance from the stop line during yellow light interval. The video was analysed using Thematic Analysis and the data extracted from it was analysed using Chi-Square Independent Test. The Thematic Analysis revealed two major themes which were traffic situation and driver compliance behaviour. Traffic situation is defined as traffic surrounding the driver, such as no car in front and behind, car in front, and car behind. Meanwhile, the Chi-Square Test result indicates that within the dilemma zone, there was a significant relationship between driver compliance behaviour and driver's distance from the stop line during yellow light interval. The closer the drivers were to the stop line, the more likely they were going to comply. In contrast, drivers showed higher non-compliant behavior when further away from stop line. This finding could help in the development of conceptual model of driving simulation with purpose in studying driver behavior.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.190-193
• /
• 2003

This paper Proposes 40 [KVA] rated SIV(Static Inverter) system for Light Rail Transit. The SIV Provide power of a fluorescent light in the car, Air-conditioner. and other equipments. To control output voltage it is used voltage control loop for constant voltage control and simultaneously used current control loop for instantaneous control at load changing. The Performance of SIV system will be verified by experimental results.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 추계학술대회 논문집
• /
• pp.101-104
• /
• 2008

This paper is a report of designing for LED lights driver unit. The main purpose of driver designing is high electrical efficient performance and intelligent control LED driver. This LED driver can be used for intelligent light control. This product expects to improve the light control by dimming instead of interlace on/off light control that increases the social cost such as car accidents and etc.