• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.76-76
• /
• 2011

Polymer-fullerene based bulk heterojunction (BHJ) solar cells can be fabricated in large area using low-cost roll-to-roll manufacturing methods. However, because of the low mobility of the BHJ materials, there is competition between the sweep-out of the photogenerated carriers by the built-in potential and recombination within the thin BHJ film [12-15]. Useful film thicknesses are limited by recombination. Thus, there is a need to increase the absorption by the BHJ film without increasing film thickness. Metal nanoparticles exhibit localized surface plasmon resonances (LSPR) which couple strongly to the incident light. In addition, relatively large metallic nanoparticles can reflect and scatter the light and thereby increase the optical path length within the BHJ film. Thus, the addition of metal nanoparticles into BHJ films offers the possibility of enhanced absorption and correspondingly enhanced photo-generation of mobile carriers. In this work, we have demonstrated several positive effects of shape controlled Au and Ag nanoparticles in organic P3HT/PC70BM, PCDTBT/PC70BM, Si-PCPDTBT/PC70BM BHJ-based PV devices. The use of an optimized concentration of Au and Ag nanomaterials in the BHJ film increases Jsc, FF, and the IPCE. These improvements result from a combination of enhanced light absorption caused by the light scattering of the nanomaterials in an active layer. Some of the metals induce the plasmon light concentration at specific wavelength. Moreover, improved charge transport results in low series resistance.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1882-1884
• /
• 1999

The photoisomerization of functional polyimide was investigated in the various temperatures and UV(360nm) & visible(450nm) light irradiation. The absorption spectrum of azobenzene containing polyamic acid in a mixture of N,N-dimethylacetamide and benzene(1:1 by volume) solution was induced photoisomerization by UV and visible light irradiation. The absorption spectrum of LB films are also induced photoisomerization by UV and visible light irradiation.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1184-1186
• /
• 1995

The absorption spectra of synthesis of azobenzene containing long chain fatty acids were investigated by UV spectrophotometer in chloroform solution. Also, the pressure-area isotherms of the molecules on the water-air interface were obtained and the LB films were fabricated onto a quartz slides and quartz crystals by the conventional Langmuir-Blodggett(LB) method. The UV absorption spectra of Langmuir-Blodggett(LB) films on quartz slides have been measured. From these measurements, following conclusions were obtained. Azobenzene containing long chain fatty acids show a photoisomerization by irradiation of UV light and visible light alternatively. At the pressure-area isotherms, the value of surface pressure increment were decreased when the number of $C_n$ increased. Also the LB films show a photoisomerization characteristics. So the LB film of azobenzene containing long chain fatty acid has possibility to being applied to functional molecular device such as photomemory and light switching.

• Journal of the Optical Society of Korea
• /
• v.19 no.4
• /
• pp.371-375
• /
• 2015

The impact of equivalent optical bandwidth on the performance of a system using a reflective electroabsorption modulator (R-EAM) based optical source has been experimentally evaluated with signals operating at 2.5 Gb/s and beyond. The equivalent optical bandwidth of our source with a broadband seed light was simply adjusted by using a bandwidth tunable optical filter. From the measurements, we have estimated the required equivalent optical bandwidth of our source for an error-free transmission (@ bit-error-rate of $10^{-12}$) and a forward error correction (FEC) threshold of $2{\times}10^{-4}$.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.114-115
• /
• 2014

Recently, the construction structure repeats the brilliant development including the shper high rising, high functionalization, environmental friendliness, conversion to ubiquitous, and etc. upon with the construction industry development and it is continually soothed. Meanwhile, as to the construction structure of the modern society, the research for corresponding to the box-frame construction way where the response to the diversity of the life of the occupant is difficult is needed. Thus, the lightweight of the structure is the important factor in order to secure the functionality. Therefore, this research tries to study the water absorption ratio and flexural strenght of the magnesium oxide light weight matrix according to the powdery modified sulfur addition ratio.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.17 no.3
• /
• pp.108-112
• /
• 2007

Cubic Zirconia single crystals having changeable color with light source were grown by skull melting method. Strong absorption of yellow color region light by Co and Nd and the absorption in violet color region by Fe led the color change from blue-green to red-purple with the light source from fluorescent to incandescent lamp. Color of crystals varied not only by the dopants but yttria contents and the conditions far heat treatment.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.52-55
• /
• 2009

A red phosphor, $(Sr,Ca)_2P_2O_7:Eu^{2+},Mn^{2+}$, for UV-LED was synthesized under a reducing atmosphere, and its luminescent properties were investigated. The phosphor absorbs ultraviolet light at around 400 nm and efficiently emits red light at approximately 610 nm through an energy transfer from $Eu^{2+}$ to $Mn^{2+}$. Using the varied input current test for the phosphor-loaded LED lamps, it was found that the luminescent efficiency of the phosphor decreased with increasing light flux. This might be due to an increased probability of excited-state absorption and the consequent non-radiative relaxation in $Mn^{2+}$ ions in the condition of high photon influx.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.5
• /
• pp.393-401
• /
• 2017

This study presents an evaluation of basic properties of light weight mortar with expanded polystyrene bead(EPB) and waste expanded polystyrene(WEP) by varying replacement rations. In order to evaluate the basic properties of the light weight mortar with EPB and WEP, unit weight, compressive strength, flexural strength, water absorption ratio, thermal conductivity and distribution of polystyrene (EPB and WEP) in hardened mortar were performed. As a result, unit volume, compressive strength, bending strength, water absorption and thermal conductivity of light weight mortar were increased, but area distribution of polystyrene decreased with increasing the replacement ratio of WEP.

• Journal of the Korea Computer Graphics Society
• /
• v.13 no.1
• /
• pp.7-14
• /
• 2007

In this paper we present an illumination model for rendering realistic stained glass. This techniques simulates the phenomenon of stained glass in real world by applying important optical component of the stained glass to the rendering algorithm. The optics for stained glass involves three basic physical mechanisms. First, diffuse light and highlight contribute to the brightness of stained glass which is typically white and changes along with the light source and the view position. Next, Fresnel refraction dominates the amount of refracted (transmitted) light. Finally, we express volume absorption occurs in all stained glass. Then, the rendered stained glass images achieve excellent realism.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.04a
• /
• pp.681-686
• /
• 1997

Foamed aluminum is well known metallic porous sound absorption material which has excellent properties of light weight and high absorbing performance. For the purpose of finding out the sound field characteristics within a simple closed cubic enclosure with foamed aluminum, analytic and experimental studies are performed. For the first time, the standing wave apparatus is used to measure absorption coefficient and impedance of the foamed aluminum. Next, the sound effects of absorption material in acoustically loaded rectangular enclosure are identified according as the foamed aluminim is to be or not.