References
- G.K. Chuah, 'An investigation into the preparation of high surface area zirconia', Catalysis Today 49 (1999) 267 https://doi.org/10.1016/S0920-5861(98)00433-7
- G.K. Chuah, S. Jaenicke, S.A. Cheng and K.S. Chan, 'The influence of preparation conditions on the surface area of zirconia', Applied Catalysis A 145 (1996) 267 https://doi.org/10.1016/0926-860X(96)00152-4
- N.Q. Minh, 'Ceramic fuel cells', J. Am. Ceram. Soc. 76 (1993) 563 https://doi.org/10.1111/j.1151-2916.1993.tb03645.x
-
J.D. Kim, S. Hana, S Kawagoe, K. Sasaki and T. Hata, 'Preparation of perovskite, Pb(Zr, Ti)
$O_3$ thin-films on YSZ(111 )/Si(111) substrates by post-deposition annealing', Thin Solid Films 385 (2001) 293 https://doi.org/10.1016/S0040-6090(00)01889-7 - M. Laurent, U. Schreiner, P.A. Langhahr, A.E. Glazounov and M.H. Hoffmann, 'Microstructural and electrical characterization of La-doped PZT ceramic prepared by a precursor route', J. Eur. Ceram. Soc. 21 (2001) 1495 https://doi.org/10.1016/S0955-2219(01)00049-8
-
H.L Lee, J.T. Kim and GG. Hong, 'Properties of the powders of the system
$Al_2O_3-ZrO_2-Y_2O_3$ prepared by precipitation method', Kor. Ceram. Soc. 25(2) (1988) 117 - K. Nassau, 'Cubic zirconia an update', Gems and Gemology (1981) 9
- R. Stevens, 'An introduction to zirconia', Magnesium Elektron Ltd, United Kingdom (1983)
- D.A. Wright, J.S. Thorp, A. Aypar and H.P. Buckley, 'Optical absorption in current-blackeded yttria-stabilized zirconia', J. Mat. Sci. 89 (1973) 876
- D.L. Wood and K. Nassau, 'Refractive indez of cubic zirconia stabilized with yttria', Appl. Optics 21(16) (1982) 2978 https://doi.org/10.1364/AO.21.002978
- H. Pmer, K.-D. Luther and W. Assmus, 'Coloured zirconia', Cryst. Res. Technol. 29 (1994) https://doi.org/10.1002/jemt.1070290105