• 한국인쇄학회지
• /
• 제10권1호
• /
• pp.1-13
• /
• 1992

The recent results concerning the synthesis and application of spiroxazine dyes have been summerized., The absorption bands of usual spiroxazine dyes are changed from colorless to colored from by irradiation of ultraviolet ray. This mechanism is derived from the cleavage of oxazine ring. Such properties are dependent on its chemical structure and surrounded matrix of spiroxazine dyes. the chemical structure of this dye is similar to the well known spriopyran. But spiroxazine dyes have noticed recently, because of excellent high light-sensitivity and superior fatigue-resistant property. This dye are already applied as photochromic lens, cloths and UV light checker.

• Journal of Microbiology and Biotechnology
• /
• 제14권3호
• /
• pp.442-449
• /
• 2004

Improving the light utilization efficiency of photosynthetic cells in photobioreactors (PBRs) is a major topic in algal biotechnology. Accordingly, in the current study we investigated the effect and suitability of photosynthetic pigment reduction for improving light utilization efficiency. The light-harvesting complex II (LH-II) genes of Rhodobacter sphaeroides were removed to construct a mutant strain with less pigment content. The mutant strain exhibited a slower growth rate than the wild-type under a low light intensity, while the mutant grew faster under a high light intensity. In addition, the specific absorption coefficient was lower in the mutant due to its reduced pigment content, thus it seemed that light penetrated deeper into its culture broth. However, the distance (light penetration depth) from the surface of the PBR to the compensation point did not increase, due to an increase in the compensation irradiance of the mutant strain. Experimental data showed that a reduced photosynthetic pigment content, which lessened the photoinhibition under high-intensity light, helped the volumetric productivity of photosynthetic microorganisms.

• Journal of Ginseng Research
• /
• 제12권1호
• /
• pp.11-29
• /
• 1988

온도 및 광도가 인삼의 광합성 및 호흡에 미친 영향을 검토하였던 바 그 결과를 요약하면 다음과 같다. 1. 온도 및 광도와 인삼잎의 광합성간에는 고도로 유의한 2차곡선회귀가 인정되었으며 광합성에 대한 온도와 광도의 효과간에는 고도로 유의한 교호작용이 인정되었다. 2. 광도의 상승에 따르는 광합성 증가율은 온도가 높아질수록 현저한 감소를 보였고 광보상점은 온도에 따라 현저한 차이를 보였으며 각 온도의 평균 광보상점은 약 600lux였다. 그리고 고려인삼의 경우 최대광합성온도는 $15^{\circ}C$ 및 $20^{\circ}C$에서는 11,000lux였고 $25^{\circ}C$ 이상에서는 9,500lux내외였다. 3. 온도의 상승에 따르는 광합성의 감소율은 광도를 높일수록 현저히 크게 나타났으며 광합성 최적온도는 15~$22^{\circ}C$로서 광도를 높일수록 최적온도는 현저히 낮아지는 경향을 보였다. 4. 투광율 15% 일복하에서 생육한 잎의 광합성량이 가장 높았고 5% 투광율에 비해 30% 투광율에서 생육된 잎의 호흡량이 현저히 많았으며 또한 온도가 높을수록 호흡량은 현저히 증가되었다. 5. 호흡율은 고온에서 높았고 광도가 높을수록 낮아졌으며 일복하의 투광율이 높아질수록 현저히 증가되었다. 6. 일중 최대 $CO_2$ 흡수는 5% 및 15% 투광일복하에서 오전 9시 그리고 20% 투광일복하에서는 오전 7~9시경에 일어났으며 투광율이 높은 일복하에서 $CO_2$ 흡입 기간은 현저히 길었다. 7. 인삼잎의 광합성에 있어서 $CO_2$ 보상점은 130ppm이었다.

• 제어로봇시스템학회논문지
• /
• 제21권4호
• /
• pp.361-366
• /
• 2015

In this paper, we propose a novel surveillance throwing robot which is compact, light-weight and has an efficient shock absorption mechanism. The throwing robot is designed in a spherical shape to be easily grabbed by a hand for throwing. Also, a motor-wheel linking mechanism is designed to be robustly protected from shocks upon landing. The proposed robot has a weight of 2.2kg and the diameter of its wheels is 150 mm. Through the field experiments, the designed robot is validated to withstand higher than 13Ns of impulse.

• 한국의류학회지
• /
• 제18권5호
• /
• pp.622-627
• /
• 1994

The purpose of this study is to investigate the adsorption rate, adsorption quantities and the UV-Cut effects of cotton fabrics treated with several UV absorbents. The result of this study were as follows: cotton fabric treated with 2,2'-dihydroxy-4- methoxy-benzophenone shows more efficient than ones treated with 4-aminobenzoic acid and 2·hydroxy-1, 4-naphthoquinone in UV absorption. This may be due to the absorption of UV light by formation of intra moleculaar hydrogen bond. The formation of hydrogen bonds between hydrogen atoms of two hydroxy groups and one oxygen atom of carboxyl group in 2, 2'-dihydroxy-4-methoxy-benzophenone would be easier than that of the other absorbents. The adsorption isotherms of 4-aminobenzoic acid and 2-hydroxy-1, 4-naphthoquinone were similar to Freundlich type, while that of 2, 2'-Dihydroxy-4-methoxy-benzophenone was Henry type. Cotton fabrics treated with Antifade MC-100 and W Cut I-2 were just alike in UV absorption, but Antifade 8001 was inferior to the others.

• 대한화장품학회지
• /
• 제27권1호
• /
• pp.29-42
• /
• 2001

We had prepared MLV liposome with Hibiscus Esculentus Ext.(HEE) which have fluorescent light in order to evaluate its percutaneous absorption about hairless rat skin. Then we investigated particle size of MLV using confocal laser scanning microscope(CLSM) and transmission electron microscope(TEM), respectively. Stability of MLV liposome and penetration of MLV liposome to hairless rat skin was measured by CLSM. As a result of experiments, MLV was globular shape and the rage of particle size was 0.3-0.5$\mu\textrm{m}$ mostly. Cream-type MLV had high stability comparatively. When we treated with MLV to rat skin, skin penetration was enhanced, especially, the optimum concentration of MLV on penetration to rat skin was 10%. Optimum penetration time was 6hr-12hr. And MLV-type HEE was more effective on percutaneous absorption than HEE-cream or liposome-type HEE.

• Journal of the Korean Wood Science and Technology
• /
• 제26권1호
• /
• pp.51-56
• /
• 1998

The bast fiber of paper bush misumada have been cultivated in south coast bay of the Korean peninsula were not used to handmade painting paper. Therefore, in using the bast fiber of paper bush misumada manufactured handmade painting paper, tested absorption speed, blot characteristics and organic functions. The results are summarized as follows; The handmade painting paper manufacured only the bast fiber of paper bush misumada proper to the absorption speed of China ink, didn't have difference of the length and width for blot. And it was most fitted to east writing-and-painting using. Also the flexibility excell, and light and shade in overpainting directly appeared, and fitted to black-and-white drawing. And the using increase plan of the paper bush misumada demanded.

• 한국염색가공학회지
• /
• 제26권3호
• /
• pp.165-172
• /
• 2014

Novel super hydrophobic orange dyes having maximum absorption band at 450-500nm were synthesized to dye polyolefin fibers such as polypropylene and ultra high molecular weight polyethylene fibers, using 4-alkylanilines and ${\beta}$-naphthol. Their absorption spectra at visible range showed almost the same, which meant that the alkyl substituents introduced to chromophore did not affect on color appearance of the dyes. Considering both color strength and wash fastness, the decyl-substituted dye was determined as the optimum one practically. From the dyeing results at various conditions, the optimum dyeing was $130^{\circ}C$ for 1 hour with 5% owf of dyes. The good fastness ratings to washing, rubbing were obtained showing 4-5 for both fibers. Light fastness was also acceptable giving rating 3-4 for polypropylene fibers and rating 3 for ultra high molecular weight polyethylene fibers.

• Advances in nano research
• /
• 제1권3호
• /
• pp.153-158
• /
• 2013

An approach to achieving of spatially homogeneous, ordered ensemble of semiconductor quantum rods in polymer film of polyvinyl butyral is reported. The CdSe/ZnS quantum rods are embedded to the polymer film. Obtained film is stretched up to four times to its initial length. A concentration of quantum rods in the samples is around $2{\times}10^{-5}$ M. The absorption spectra, obtained in the light with orthogonal polarization, confirm the occurrence of spatial ordering in a quantum rod ensemble. Anisotropy of the optical properties in the ordered quantum rod ensemble is examined. The presented method can be used as a low-cost solution for preparing the nanostructured materials with anisotropic properties and high concentration of nanocrystals.

• 센서학회지
• /
• 제32권1호
• /
• pp.55-61
• /
• 2023

The objective of this study is to determine the concentrations of mixed gases by establishing a diagnosis method of a transformer using tunable-wavelength optical infrared sensors. Absorption of infrared light by methane, acetylene, and ethylene gases injected is measured from the outputs of the infrared sensors. Regression analysis equations of the gas concentrations are acquired from their respective measured absorption. The obtained concentrations are as follows: -3-9 % errors above 600 ppm(methane), 3 % errors above 1200 ppm(acetylene), and 10 % errors above 500 ppm(ethylene). The concentration inference equations obtained using the individual gases are applicable when the absorption wavelength bands do not overlap. The results of the fault analysis of a transformer using the Duval triangle method and the tunable infrared gas sensors are as follows: temperature faults with -1-1% errors and energy faults with -7-7 % errors.