• 산업진흥연구
• /
• 제6권4호
• /
• pp.1-9
• /
• 2021

본 연구는 정수슬러지의 활용을 위하여 경량골재를 제조하고, 그 물성을 확인하기 위하여 경량골재의 특성과 그 활용가능성을 확인하는 것이다. 경량골재 원료로써 특성을 알아보기 위하여 화학조성 및 열적 특성에 대하여 검토하였다. 급속소성법을 이용하여 골재를 소성하고 물성을 측정하였다. 정수슬러지는 높은 강열감량을 가지고 있었으며, 높은 내화도를 가지고 있었다. 정수슬러지를 30wt% 첨가하였을 때 1,150~1,200℃의 온도에서 경량화되는 것을 확인할 수 있었고, 1200℃이상의 온도에서 밀도 0.8이하의 초경량골재도 제조할 수 있었다. 일반골재를 대체하여 콘크리트에 적용 시 28일 강도가 200~600kgf/cm²를 갖는 공시체를 얻을 수 있었으며, 여과재 시험 시 일반모래와 동등 이상의 성능을 나타냈다.

• 한국의류산업학회지
• /
• 제21권4호
• /
• pp.509-514
• /
• 2019

Cotton fabrics were treated with gelatin to enhance dyeability and color strength when using Caesalpinia sappan dye. Gelatin was used as the protein and a pad-dry- cure method was used for the treatment process (2, 4, 6, 8, 10, 12, 14g/l concentration). Pretreated fabrics were mordanted with 10% alum. Fabrics were then dyed with freeze-dried sappan wood water extract powder form. Dyed samples were assessed in regards to dyeing behavior and color fastness. Comparing untreated and gelatin treated samples from the SEM images indicated that the Gelatin treatment (10g/l) resulted in an enhanced surface roughness that was relative to that of untreated cotton. Padding cotton with gelatin at 6g/l concentration afforded dyed fabrics with a 2 times increase in the K/S value over that of untreated fabrics. All dyed samples were red color with a significant enhancement in the sample color strength (K/S) being observed for pretreated samples. pH values favor dye absorption with pH 7 yielding the highest color strength. Dyeing at an elevated temperature resulted in a lower color strength and reddish-dull color. Longer dyeing times created greater color strengths for untreated and gelatin treated cotton. Increased dye concentrations resulted in higher K/S values for both gelatin treated and untreated cotton. As for color fastness, gelatin treated and untreated cotton fabrics dyed with sappan wood extract showed a relatively low rating in washing fastness (color change 1 rating), light fastness (1 rating), and rubbing fastness (wet:1-2, dry:3-4 rating).

• Environmental Engineering Research
• /
• 제24권3호
• /
• pp.463-473
• /
• 2019

Nanoscale zero-valent iron (nZVI) has proved to be an effective tool in applied environmental nanotechnology, where the decreased particle diameter provides a drastic change in the properties and efficiency of nanomaterials used in water purification. However, the agglomeration and colloidal instability represent a problematic and a remarkable reduction in nZVI reactivity. In view of that, this study reports a simple and cost-effective new strategy for ultra-small (< 7.5%) distributed functionalized nZVI-EG (1-9 nm), with high colloidal stability and reduction capacity. These were obtained without inert conditions, using a simple, economical synthesis methodology employing two stabilization mechanisms based on the use of non-aqueous solvent (methanol) and ethylene glycol (EG) as a stabilizer. The information from UV-Vis absorption spectroscopy and Fourier transform infrared spectroscopy suggests iron ion coordination by interaction with methanol molecules. Subsequently, after nZVI formation, particle-surface modification occurs by the addition of the EG. Size distribution analysis shows an average diameter of 4.23 nm and the predominance (> 90%) of particles with sizes < 6.10 nm. Evaluation of the stability of functionalized nZVI by sedimentation test and a dynamic light-scattering technique, demonstrated very high colloidal stability. The ultra-small particles displayed a rapid and high nitrate removal capacity from water.

• 대한화학회지
• /
• 제63권3호
• /
• pp.151-159
• /
• 2019

본 연구는 밀도 범함수 이론(DFT) 가운데 하나인 B3LYP 방법을 $6-31G^{**}$, cc-pVDZ, cc-pVTZ의 바탕함수 집합(basis set)과 함께 사용하여 전자 공여성 분자(D)로 카바졸(carbazol) 그리고 전자 구인성 분자(A)로 dicyanobenzene, diphenyl sulfone, benzonitrile 등의 조합으로 이루어진 열 활성화 지연형광(TADF) 후보 물질에 대하여 분자구조를 최적화하고 진동주파수를 계산하였다. 또한 최적화된 분자 구조에 대하여 HOMO와 LUMO 에너지 차이를 계산하였으며, 나아가 시간 의존 밀도 범함수 이론(TD-DFT)을 사용하여 분자의 최대 흡수 및 방출 파장(${\lambda}_{max}$) 그리고 단일항과 삼중항 들뜬 상태의 에너지 차이(${\Delta}E_{ST}$) 등을 계산하여 열 활성 지연형광(TADF) 소재로서의 가능성을 예측하였다.

• 한국염색가공학회지
• /
• 제33권1호
• /
• pp.10-23
• /
• 2021

In order to synthesize the dye suitable for supercritical carbon dioxide(ScCO2) dyeing, a series of azo based disperse dyes were prepared using various aniline derivatives as diazo components and indol derivatives as coupling components. Dyeing process in ScCO2 of the synthesized dyes was performed on PET fiber at 120℃ for 2 hrs under 250bar pressure with 0.5% o.w.f. of dye concentration. The absorption maxima varied from 400 to 580nm depending on the substituted groups in aniline derivatives and the indol derivatives. The dyes showed high molar extinction coefficients(ε) of 27,000~61,000M-1cm-1. Dyed PET fiber exhibited excellent brightness and good light, washing and perspiration(acid/alkali) fastness properties.

• 융합정보논문지
• /
• 제11권2호
• /
• pp.10-15
• /
• 2021

본 논문에서는 먼저 습식 코팅 방법으로 페로브스카이트 (CH3NH3PbI3) 박막을 글라스 상에 형성하고, 다양한 분석 기법을 이용하여 막의 두께, 표면거칠기, 결정성, 구성성분 및 가시광 영역에서의 이 물질의 반응에 대해 논한다. 완성된 반도체 물질은 막내부에 결함(defect)이 없고 균일하며, 표면거칠기는 매우 작으며, 가시광영역에서 높은 흡수율이 관찰되었다. 다음으로 이와 같이 형성된 유무기 층에 hole 형상을 구현하기 위하여, 구멍이 일정한 간격으로 있는 메탈마스크, 페로브스카이트 물질이 코팅되어 있는 유리, 자석 순서로 되어있는 구조의 샘플을 상압플라즈마 공법을 이용하여 시간에 따른 물질에 형성되는 hole 형태의 변화를 분석하였다. 시간이 길어짐에 따라 더 많이 식각되는 것을 알 수 있으며, 이 중에서 공정 시간을 가장 오래한 샘플에 대해서는 보다 자세하게 살펴보았고, 플라즈마의 위치에 따른 차이에 의해 7영역으로 분류할 수 있었다.

• 공업화학
• /
• 제22권4호
• /
• pp.348-352
• /
• 2011

본 연구에서는 펜던트 타입의 고분자인 폴리우레탄에 스틸벤 유도체를 가진 다양한 발색단을 곁가지로 도입하고, 이를 연결하는 방식으로 분자를 디자인하고 합성하였다. 모노머 분자인 N,N-bis(2-hydroxyethyl)amino-4'-cyanostilbene, N,N-bis(2-hydroxyethyl) amino-4'-methoxy stilbene, N,N-bis(2-hydroxyethyl)amino-4'-acetylstilbene, N,N-bis (2-hydroxyethyl) amino stilbene은 Wittig 반응을 이용하여 합성하였고, N,N-bis(2-hydroxyethyl)amino-4'-nitrostilbene는 Knoevenagel 축합반응을 이용하여 합성하였다. 합성된 물질의 흡수 및 형광 스펙트럼의 측정으로부터, 치환기로 전자 끌게 작용기를 도입한 경우 그 정도에 따라 스펙트럼이 장파장으로 이동하며, 반대로 전자 주게 작용기가 도입된 경우는 단파장 이동하는 것을 확인 하였다. 반면, $NO_2$가 치환된 경우 그 자체가 빛을 소멸시키는 쾐쳐로 작용하여 PL이 관측되지 않았다.

• Korean Journal of Chemical Engineering
• /
• 제35권11호
• /
• pp.2283-2289
• /
• 2018

$TiO_2$ microspheres were successfully synthesised by simple solution phase method by using various amount of titanium butoxide as precursor. The prepared $TiO_2$ were characterized by X-ray diffraction (XRD), UV-vis diffuse reflectance absorption spectra (UV-DRS), X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). XRD analysis revealed that the as-synthesized $TiO_2$ microsphere poses an anatase phase. The photocatalytic degradation experiments were carried out with three different dyes, such as methylene blue, brilliant black, reactive red-120 for four hours under UV light irradiation. The results show that $TiO_2$ morphology had great influence on photocatalytic degradation of organic dyes. The experimental results of dye mineralization indicated the concentration was reduced by a high portion of up to 99% within 4 hours. On the basis of various characterization of the photocatalysts, the reactions involved to explain the photocatalytic activity enhancement due to the concentration of titanium butoxide and morphology include a better separation of photogenerated charge carriers and improved oxygen reduction inducing a higher extent of degradation of aromatics.

• Current Applied Physics
• /
• 제18권11호
• /
• pp.1422-1425
• /
• 2018

$NaTa_{1-x}Fe_xO_3$ ($0{\leq}x{\leq}0.40$) nanocubes were synthesized by a relatively low temperature hydrothermal method, using $Ta_2O_5$, $FeCl_3$ and NaOH as the precursors. The UV-vis diffuse reflectance spectra showed that $NaTa_{1-x}Fe_xO_3$ had significant visible-light-absorbing capability, and the absorption edge of $NaTaO_3$ shifted to longer wavelength with the increase of Fe dopants. Moreover, $NaTa_{1-x}Fe_xO_3$ exhibited room-temperature ferromagnetism when $Fe^{3+}$ occupied $Ta^{5+}$ sites in $NaTaO_3$ crystal lattice. The ferromagnetism is mainly attributed to the superexchange interactions between doped $Fe^{3+}$, rather than the contribution of oxygen vacancies caused by Fe doping. Therefore, Fe doping can simultaneously regulate the optical and magnetic properties of $NaTaO_3$ semiconductor, which will enable its potential applications in multifunctional optical-electronics and opticalspintronics devices.

• 대한금속재료학회지
• /
• 제56권12호
• /
• pp.900-909
• /
• 2018

A $ZnO/TiO_2$ photocatalyst decorated with PbS quantum dots (QDs) was synthesized to achieve high photocatalytic efficiency for the decomposition of dye in aqueous media. A $TiO_2$ porous layer, as a precursor photocatalyst, was fabricated using micro-arc oxidation, and exhibited irregular porous cells with anatase and rutile crystalline structures. Then, a ZnO-deposited $TiO_2$ catalyst was fabricated using a zinc acetate solution, and PbS QDs were uniformly deposited on the surface of the $ZnO/TiO_2$ photocatalyst using the successive ionic layer adsorption and reaction (SILAR) technique. For the PbS $QDs/ZnO/TiO_2$ photocatalyst, ZnO and PbS nanoparticles are uniformly precipitated on the $TiO_2$ surface. However, the diameters of the PbS particles were very fine, and their shape and distribution were relatively more homogeneous compared to the ZnO particles on the $TiO_2$ surface. The PbS QDs on the $TiO_2$ surface can induce changes in band gap energy due to the quantum confinement effect. The effective band gap of the PbS QDs was calculated to be 1.43 eV. To evaluate their photocatalytic properties, Aniline blue decomposition tests were performed. The presence of ZnO and PbS nanoparticles on the $TiO_2$ catalysts enhanced photoactivity by improving the absorption of visible light. The PbS $QDs/ZnO/TiO_2$ heterojunction photocatalyst showed a higher Aniline blue decomposition rate and photocatalytic activity, due to the quantum size effect of the PbS nanoparticles, and the more efficient transport of charge carriers.