• 비파괴검사학회지
• /
• 제36권5호
• /
• pp.399-405
• /
• 2016

최근 많은 장점으로 기존 전기식 센서를 대체하여 그 적용 영역을 빠르게 넓혀가고 있는 광섬유 센서는 센서부에서 계측기 사이의 신호 전달을 위해 광 어댑터와 광 점퍼 코드와 같은 광소자를 사용하게 된다. 광 어댑터를 이용하여 신호 전달을 하는 경우 단면이 서로 맞닿게 되어 이물질에 의해 코어 부분에 손상이 발생할 수 있으며, 이는 광 손실 및 광 접속 불능을 유발할 수 있다. 따라서, 본 연구에서는 지속적인 유지보수를 필요로 하는 문제들을 근원적으로 해결할 수 있는 대안으로 비접촉식 광섬유 점퍼 코드를 개발하였으며 그 전송 성능을 평가하였다. 시험 결과, 기존의 접촉식 광 점퍼 코드는 2 mm의 간극에서 광 신호 전송이 불가능한데 반해 비접촉식 광 점퍼 코드의 경우 초기 광 손실은 상대적으로 크지만 간극이 증가하더라도 약 7 mm 정도까지 안정적으로 신호 전송이 가능하였다. 따라서, 패치 코드가 광센서 간 신호 전송을 위한 케이블임을 고려할 때 외부의 환경적 요인에 대해 더 우수한 신호 안정성을 가진 비접촉식 패치 코드가 접촉식 패치 코드에 비해 현장 적용성이 더 뛰어남을 확인하였다.

• 한국멀티미디어학회논문지
• /
• 제14권6호
• /
• pp.752-758
• /
• 2011

본 논문의 연구내용은 차량간 통신에 응용이 가능한 조명용 LED 광통신 링크의 링크전송성공율 분석에 관한 연구로서, 가시광통신에 기반한 차량간 메시지 전달 시스템을 모델링 하고, 광수신 파워를 통해 신호대 잡음비 (signal-to-noise ratio)를 계산하고, 이에 따른 링크 전송성공확률을 계산함으로써, 가시광통신에 기반한 차량간 무선통신이 가능함을 검증하는 것이다. 저속이동 또는 정지 중인 차량의 후미등을 광송신기로 사용하고 후방차량의 전방에 장착된 광수신기를 이용하는 메시지 전달시스템에 있어, 각 차량의 위치가 정규확률분포를 따를 때, 광송신기 및 광수신기의 물리적 특성에 따른 링크전송성공확률을 계산한다. 먼저, 정규확률분포에 따라 차량의 위치를 랜덤하게 생성한 후, 각각의 광링크에 해당하는 BER을 계산하였다. 이를 통해, 전체 링크 중 $BER{\leq}10^{-6}$을 만족하는 링크의 비율을 링크전송성공율로 정의한 결과, 송신 광파워가 400mW이고 광송신기의 semi-angle at half power가 30도인 최적화되지 않은 차량간 광링크의 경우, 링크 전송성공율 90% 이상이 가능함을 확인하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권7호
• /
• pp.3239-3267
• /
• 2018

Image and video dehazing is a popular topic in the field of computer vision and digital image processing. A fast, optimized dehazing algorithm was recently proposed that enhances contrast and reduces flickering artifacts in a dehazed video sequence by minimizing a cost function that makes transmission values spatially and temporally coherent. However, its fixed-size block partitioning leads to block effects. The temporal cost function also suffers from the temporal non-coherence of newly appearing objects in a scene. Further, the weak edges in a hazy image are not addressed. Hence, a video dehazing algorithm based on well designed spectral clustering is proposed. To avoid block artifacts, the spectral clustering is customized to segment static scenes to ensure the same target has the same transmission value. Assuming that edge images dehazed with optimized transmission values have richer detail than before restoration, an edge intensity function is added to the spatial consistency cost model. Atmospheric light is estimated using a modified quadtree search. Different temporal transmission models are established for newly appearing objects, static backgrounds, and moving objects. The experimental results demonstrate that the new method provides higher dehazing quality and lower time complexity than the previous technique.

• Journal of the Korean Wood Science and Technology
• /
• 제24권4호
• /
• pp.47-55
• /
• 1996

UV transmission spectra of water-soluble acrylic resin films containing hydroxybenzophenolic, hydroxyphenylbenzotriazolic UV absorber and HALS(hindered amine light stabilizer) were investigated by exposure time(before exposure weathered for 160 and 320hours) in QUV Weather-Ometer. Also the YID(yellowness index difference), LID(lightness index difference) and CD(color difference) of dried water-soluble acrylic resin films and the coated woods of Larix leptolepis were analyzed by addition level of UV absorber(0, 1, 2 and 3%) and HALS(0, 0.5, 1 and 1.5%) and by exposure time in QUV Weather-Ometer. They showed no significant effects on UV transmission spectra of dried water-soluble acrylic resin films in the range of 300 to 400nm irrespective of exposure time. However, UV transmission decreased as increase of exposure time. UV transmission spectra were lower in dried water-soluble acrylic resin films containing hydroxybenzophenolic UV absorber and HALS than in these containing hydroxyphenylbenzotriazolic UV absorber and HALS in the range of 350 to 400nm. The least YID, LID and CD in the coated woods of Larix leptolepis appeared at the addition level of 3%, based on non-volatile content, in hydroxybenzophenolic and hydroxyphenylbenzotriazolic UV absorber, and of 1.5% in HALS to water-soluble acrylic resin.

• 전기전자학회논문지
• /
• 제22권2호
• /
• pp.316-323
• /
• 2018

본 논문에서는 가시광통신에서 플리커를 방지하기 위한 3-레벨 바이트반전 전송방식을 새로이 소개한다. 가시광 송신부에서는 3-레벨 LED 변조기를 사용하여 원신호와 반전신호를 차례로 전송하며, 데이터 전송과정에서 LED의 평균광출력이 일정하게 유지되어 플리커가 발생하지 않는다. 가시광 수신부에서는 간단한 비교기를 사용하여 원신호가 쉽게 복구된다. 이 방식에서는 플리커 방지를 위하여 별도의 클럭이나 캐리어가 필요하지 않아 구조가 매우 간단하며, 저렴한 비용으로 플리커가 없는 실내의 가시광 시스템을 구축하는 데에 유용할 것으로 판단된다.

• 한국약용작물학회지
• /
• 제24권4호
• /
• pp.277-283
• /
• 2016

Background: The photosynthetic efficiency cool-season, semi-shade ginseng is normal at low morning temperatures, but drops at high afternoon temperatures. Therefore, optimal plant performance would be ensured if it were possible to control daily light transmission rates (LTR). Methods and Results: Plants were grown in a controlled light environment that replicated 11 AM conditions and comparatively analyzed against plant grown under normal conditions. Growth in the controlled light environment resulted in a 2.81 fold increase in photosynthetic efficiency with no change in chlorophyll content, although LTR were high due to low morning temperatures. Increased aerial plant growth was observed in the ginseng plants adapted to the controlled light environment, which in turn influenced root weight. An 81% increase in fresh root weight (33.3 g per plant on average) was observed in 4-year-old ginseng plants grown in controlled light environment compared to the plants grown following conventional practices (18.4 g per plant on average). With regard to the inorganic composition of leaves of 4-year-old ginseng plants grown in controlled light environment, an increased in Fe content was observed, while Mn and Zn content decreased, and total ginsenoside content of roots increased 2.37 fold. Conclusions: Growth of ginseng under a favorable light environment, such as the condition which exist naturally at 11 AM and are suitable for the plant's photosynthetic activity creates the possibility of large scale production, excellent-quality ginseng.

• 한국위성정보통신학회논문지
• /
• 제11권1호
• /
• pp.32-36
• /
• 2016

본 논문에서는 LED(Light Emitting Diode)의 White 조명을 이용한 VLC(Visible Light Communication) 송 수신기를 구현하였다. 가시광 통신과 다양한 환경에서 고속 데이터 전송을 위한 무선 통신 방식의 차이점을 분석하였고 QAM 전송 기법을 이용하여 실제채널을 통과한 심벌의 수신을 확인하였다. 그리고 가시광 통신의 높은 데이터 속도를 얻기 위해 실험을 통해서 고려해야 되는 변수를 찾았다. 또한 주파수 대역을 정하고 거리에 따른 송수신간의 최적의 게인을 찾았다. 효율적인 가시광 통신의 신호 전송 및 검출을 위하여 직교 시퀀스를 이용한 효율적인 신호 검출 기법의 성능을 랩뷰를 이용하여 보였다.

• 한국전기전자재료학회논문지
• /
• 제21권1호
• /
• pp.35-43
• /
• 2008

Aviation obstacle lights including controller for the safe night aviation service have applied to high voltage transmission line of which height is from $60{\sim}180 m$, Fresnel lens made by Augustine Fresnel have been applied to light houses, These Fresnel lens were applied to aviation obstacle lights and have been universally used, It was reported that Fresnel lens for aviation obstacle light was used in the first place in Korea in 1987, LEDs have recently been applied to aviation obstacle lights, So, the optimum physical design is essential to the design of aviation obstacle light. In this study, optical and three dimensional modeling of LED module and globe lens were performed, And thermal analysis due to LED thermal source and service thermal condition in high voltage transmission line was performed and was analyzed comparing with experiments, The optimum design process of medium intensity LED aviation obstacle lights was constructed with three dimensional modeling, thermal analysis, and thermal experimental technique.

• 한국전기전자재료학회논문지
• /
• 제29권5호
• /
• pp.317-320
• /
• 2016

In order to acquire clear images capable of diagnosing cracked tooth by light transmission, the optical properties of LED light source were examined. Based on the results, the prototype which basically consisted of LED light source, bandpass filter and commercial compact camera module was designed and manufactured. The wavelength and optical power of the LED in the prototype were 850 nm and 7 mW/Sr, respectively. In evaluation of the prototype using microscope, the observation of the crack with width of above $17{\mu}m$ was possible. In addition, image analysis to obtain shape information on the observed tooth cracks was carried out.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.371-371
• /
• 2006

The purpose of this study is to provide a fundamental data for efficient and economical reduction method and predict ion method of floor impact noise. In order to get the useful results, the measurement on the vibration transmission characteristics of standard test building with four rooms by using heavy and light-weighed impact source were carried out. In this measurement various conditions such as the change of test structure construction, the pick-up sensor location, the excitation posit ion, and the resilient material types were applied to get the vibration characteristics transmitted from excitation room to adjacent rooms.